TRC REPALCE- HELP please !
 

Hi:
Can I replace in monitor JEAN JD144K the TRC original (M30AFA13X01)
for the TRC M34KUN35X29 , without other changes in circuit ? - It´s
possible?
TIA

Regards

Heriberto


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.752 / Virus Database: 503 - Release Date: 03/09/2004

All other issues aside, the two tubes are not the same size; M34 (cm) vs M30
(cm), it won't fit in the cabinet. Judging by the almost completely different
tube numbers, they're probably electronically different as well...

Thanks..... and Excusme.... I corrected the number of CRT replace is
M34KUN35X29 (same size a original CRT)- It fit well in cabinet, but i not
sure if same type?

BWL escribió en el mensaje de noticias
...
All other issues aside, the two tubes are not the same size; M34 (cm) vs
M30
(cm), it won't fit in the cabinet. Judging by the almost completely
different
tube numbers, they're probably electronically different as well...


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.752 / Virus Database: 503 - Release Date: 03/09/2004

Thanks..... and Excusme.... I corrected the number of CRT replace is
M34KUN35X29 (same size a original CRT)- It fit well in cabinet, but i not
sure if same type?

BWL escribió en el mensaje de noticias
...
All other issues aside, the two tubes are not the same size; M34 (cm) vs
M30
(cm), it won't fit in the cabinet. Judging by the almost completely
different
tube numbers, they're probably electronically different as well...


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.752 / Virus Database: 503 - Release Date: 03/09/2004

"Heriberto" ha scritto nel messaggio
...
Thanks..... and Excusme.... I corrected the number of CRT replace is
M34KUN35X29 (same size a original CRT)- It fit well in cabinet, but i not
sure if same type?

I think the only differences may be on the deflection yokes, and without a
deep analisys of the properties, you can try to replace it and test it,
paying attention to the HOTransistor that may become too hot if the yoke is
not compatible...
I think that the yokes are almost the same and the only thing you have to do
is to calibrate the raster dimensions with trimmers or ServiceMode (if the
monitor features it).
Regards
Fulcro

"Heriberto" ha scritto nel messaggio
...
Thanks..... and Excusme.... I corrected the number of CRT replace is
M34KUN35X29 (same size a original CRT)- It fit well in cabinet, but i not
sure if same type?

I think the only differences may be on the deflection yokes, and without a
deep analisys of the properties, you can try to replace it and test it,
paying attention to the HOTransistor that may become too hot if the yoke is
not compatible...
I think that the yokes are almost the same and the only thing you have to do
is to calibrate the raster dimensions with trimmers or ServiceMode (if the
monitor features it).
Regards
Fulcro