Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 113
Default how to repair this circuit board?

I could do that in a half hour. I should show you the regulator board in my bench receiver, it is twice as busted up as that. Send it over and I'll do it for, umm, forty bucks.

First, get a scraper. I got a special tool to remove the soldermask. (the green ****)Then bridge most of the bigger foils with solder - only. Then take cyanoacryilate (super glue) and glue it together from the top. Then go to each connection you bridged, of course to made it to the right position, I have had to use a hammer to pound them back together at times, and that is why you do not want the extra thick glue, you want low viscosity. And at each connection reflow the solder blob and embed used solder wick in it. It will lend some strength and therefore longevity.

After that get to the smaller connections, any which way. The short distance makes it easy. Some you can do with the cutoffs from the leads of components you have installed in other stuff. (that is REALLY what the tray on your soldering station is for :-)

****, the one you got is so easy, if you can get to Cleveland bring it over with a case of Bud and I will just do it right in front of you.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
refrigerator circuit board repair for GE Stormin Mormon[_10_] Home Repair 60 September 27th 15 05:19 AM
Delta ss350 scroll saw circuit board repair Too_Many_Tools Woodworking 4 July 25th 08 02:32 AM
About TV Repair: How do I disconnect Anode connection from Circuit board? Red Cloud Electronics Repair 4 June 10th 07 05:36 PM
I screwed up a ram chip repair - thrashed circuit board - can a newbie recover? jhuie Electronics Repair 1 June 14th 06 06:40 PM
Circuit board repair glue that can stand soldering temperature? larry moe 'n curly Electronics Repair 16 January 31st 06 04:35 PM


All times are GMT +1. The time now is 01:41 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"