Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Using a Signal Generator for an "In Home" radio transmitter
|
#2
Posted to sci.electronics.repair
|
|||
|
|||
Using a Signal Generator for an "In Home" radio transmitter
In article ,
Chuck wrote: . Someone started a pirate station playing Tejano music 24 hours a day. Unfortunately their frequency was at 90.3 MHz and the signal bled over onto the local MPR signal at 90.1. I complained to the FCC and within 3 weeks they shut the station down. So it appears that the FCC is more aggressive when the station impinges on legitimate signals. "Harmful interference" vs. "unauthorized operation". Both can come with big fines... but, yes, the FCC is somewhat more likely to react when faced with a situation where a legitimate licensed broadcaster is being interfered with. (Commercial licensees have paid $$ for their licenses, and don't like losing market-share/coverage to pirate transmitters). |
#3
Posted to sci.electronics.repair
|
|||
|
|||
Using a Signal Generator for an "In Home" radio transmitter
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Using a Signal Generator for an "In Home" radio transmitter | Electronics Repair | |||
signal generator to frequency counter signal tap | Electronics | |||
B&K E-200D signal generator - no signal | Electronics Repair |