DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Cracking open a Galaxy Audio PA amp (https://www.diybanter.com/electronics-repair/610523-re-cracking-open-galaxy-audio-pa-amp.html)

[email protected] May 9th 18 10:55 PM

Cracking open a Galaxy Audio PA amp
 
On Monday, September 13, 2010 at 12:32:15 AM UTC-5, David Nebenzahl wrote:
I inherited a repair job that I can't get started because I can't get
the damn amp open.

It's a Galaxy Audio Core PA5X140 all-in-one PA. It's a tough little
unit, with a die-cast metal chassis set into a thick rugged plastic
(polypropylene?) case, that can sit on top of a mike stand. Similar to
this one: http://galaxyaudio.com/MSPA.jsp. The front of the chassis has
6 screws into the case, and there's one on the back I removed, but I
still can't get the chassis out of the case. I tried prying the case,
thinking there might be some cast-in lugs I could open, but no luck, and
I didn't want to risk chewing up the edge of the case.

Does anyone have any idea how to open up this unit?


--
The fashion in killing has an insouciant, flirty style this spring,
with the flaunting of well-defined muscle, wrapped in flags.

- Comment from an article on Antiwar.com (http://antiwar.com)


Remove 6 screws from front, 1 screw and 1 nut for speaker jack on back. Get a couple of thin flat blade screwdriver to break the seal around the front metal cage to the plastic back cover. it should slide out easily.

[email protected] May 10th 18 12:55 AM

Cracking open a Galaxy Audio PA amp
 
On Wednesday, May 9, 2018 at 5:55:28 PM UTC-4, wrote:
On Monday, September 13, 2010 at 12:32:15 AM UTC-5, David Nebenzahl wrote:
I inherited a repair job that I can't get started because I can't get
the damn amp open.

It's a Galaxy Audio Core PA5X140 all-in-one PA. It's a tough little
unit, with a die-cast metal chassis set into a thick rugged plastic
(polypropylene?) case, that can sit on top of a mike stand. Similar to
this one: http://galaxyaudio.com/MSPA.jsp. The front of the chassis has
6 screws into the case, and there's one on the back I removed, but I
still can't get the chassis out of the case. I tried prying the case,
thinking there might be some cast-in lugs I could open, but no luck, and
I didn't want to risk chewing up the edge of the case.

Does anyone have any idea how to open up this unit?


--
The fashion in killing has an insouciant, flirty style this spring,
with the flaunting of well-defined muscle, wrapped in flags.

- Comment from an article on Antiwar.com (http://antiwar.com)


Remove 6 screws from front, 1 screw and 1 nut for speaker jack on back. Get a couple of thin flat blade screwdriver to break the seal around the front metal cage to the plastic back cover. it should slide out easily.


You realize that the posting is over 5 years old right!!

John-Del[_2_] May 10th 18 12:34 PM

Cracking open a Galaxy Audio PA amp
 
On Wednesday, May 9, 2018 at 7:55:28 PM UTC-4, wrote:
On Wednesday, May 9, 2018 at 5:55:28 PM UTC-4, wrote:
On Monday, September 13, 2010 at 12:32:15 AM UTC-5, David Nebenzahl wrote:
I inherited a repair job that I can't get started because I can't get
the damn amp open.

It's a Galaxy Audio Core PA5X140 all-in-one PA. It's a tough little
unit, with a die-cast metal chassis set into a thick rugged plastic
(polypropylene?) case, that can sit on top of a mike stand. Similar to
this one: http://galaxyaudio.com/MSPA.jsp. The front of the chassis has
6 screws into the case, and there's one on the back I removed, but I
still can't get the chassis out of the case. I tried prying the case,
thinking there might be some cast-in lugs I could open, but no luck, and
I didn't want to risk chewing up the edge of the case.

Does anyone have any idea how to open up this unit?


--
The fashion in killing has an insouciant, flirty style this spring,
with the flaunting of well-defined muscle, wrapped in flags.

- Comment from an article on Antiwar.com (http://antiwar.com)


Remove 6 screws from front, 1 screw and 1 nut for speaker jack on back. Get a couple of thin flat blade screwdriver to break the seal around the front metal cage to the plastic back cover. it should slide out easily.


You realize that the posting is over 5 years old right!!




I called OP David Nebenzahl. For your information sir, he's been sitting by his computer staring at the screen for the last five years waiting for that very answer. While he's enormously grateful, he hasn't responded publicly with a thank you yet because he's not doing very well. It seems that in the last five years, he's ignored his health, is suffering from vitamin D deficiency, and put on a lot of weight. He also took up smoking. But with his amp now open, he'll be back in form in less than two years according to him...


[email protected] May 10th 18 01:30 PM

Cracking open a Galaxy Audio PA amp
 
That was just cruel!

Peter Wieck
Melrose Park, PA


All times are GMT +1. The time now is 01:07 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter