DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Frankenvalve (https://www.diybanter.com/electronics-repair/609680-frankenvalve.html)

Gareth Magennis[_3_] April 25th 18 07:21 PM

Frankenvalve
 
Found 2 12AT7 valves inside a Fender (Evil) Twin today.

Both branded 12AT7, National, made in USA.

Except one is way bigger than the other one.

http://i67.tinypic.com/fc0ehi.jpg



The bigger one has a plate structure some 1.75 times taller than that of the
smaller one, yet both are apparently 12AT7.


On my valve tester, the larger valve traces showed approximately twice the
current of the smaller one.
The curves basically look like this is a double current 12AT7.



What is it?




Gareth.


[email protected] April 25th 18 07:34 PM

Frankenvalve
 
On Wednesday, April 25, 2018 at 2:21:55 PM UTC-4, Gareth Magennis wrote:
Found 2 12AT7 valves inside a Fender (Evil) Twin today.

Both branded 12AT7, National, made in USA.

Except one is way bigger than the other one.

http://i67.tinypic.com/fc0ehi.jpg



The bigger one has a plate structure some 1.75 times taller than that of the
smaller one, yet both are apparently 12AT7.


On my valve tester, the larger valve traces showed approximately twice the
current of the smaller one.
The curves basically look like this is a double current 12AT7.



What is it?




Gareth.


It is a 'mistake' - pure and simple, nothing exotic at all.

"National" as distinct from National Union (NU, later, Philco) was a rebrander of tubes, and once upon a time, the house brand for a number of retail tube sellers including Richardson Electronics. Much of their stock came from surplus, pulls and culls from the actual manufacturers and in point of-fact sold with no further testing than fitting in the appropriate box after relabeling.

What you have is a tube getting mixed into a lot, scrubbed, painted and boxed, and sent off into the world with no further thought.

Peter Wieck
Melrose Park, PA


Phil Allison[_3_] April 26th 18 04:16 AM

Frankenvalve
 
Gareth Magennis wrote:

Found 2 12AT7 valves inside a Fender (Evil) Twin today.

Both branded 12AT7, National, made in USA.

Except one is way bigger than the other one.

http://i67.tinypic.com/fc0ehi.jpg



The bigger one has a plate structure some 1.75 times taller than that of the
smaller one, yet both are apparently 12AT7.



** https://en.wikipedia.org/wiki/12AT7

Nothing to worry about, the shape and size of plate structures of common twin triodes vary a lot.



..... Phil


All times are GMT +1. The time now is 01:37 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter