DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Pot tapers (https://www.diybanter.com/electronics-repair/604572-pot-tapers.html)

MOP CAP[_2_] January 31st 18 11:50 PM

Pot tapers
 
My sone has posted the catalog sheet I promised on

http://www.bartlettstreet.com/electronics/PotTapers.jpg

CP

Fox's Mercantile February 1st 18 12:22 AM

Pot tapers
 
On 1/31/18 4:50 PM, MOP CAP wrote:
My sone has posted the catalog sheet I promised on


http://www.bartlettstreet.com/electronics/PotTapers.jpg


CP

Thankies

Heh, and not a single K or W in the list. ;-)


--
"I am a river to my people."
Jeff-1.0
WA6FWi
http:foxsmercantile.com

Phil Allison[_3_] February 1st 18 03:59 AM

Pot tapers
 
Fox's Mercantile wrote:

--------------------------


My sone has posted the catalog sheet I promised on


http://www.bartlettstreet.com/electronics/PotTapers.jpg



Heh, and not a single K or W in the list. ;-)


** Not a single mention of any of the time honoured code letters for tapers either.

FYI:

This wiring diagram for a late 60s Fender is instructive:

http://www.kbapps.com/audio/schemati...b568layout.php

In order from the left, the pots are labelled:

50K RA, 3M RA, 100K L, 250K A, 250K A, 1M A, 250k A, 250K A, 1M A.

where RA = reverse audio, L = linear and A = audio.


The "3M RA " pot adjusts the phase shift oscillator part of the "Vibrato" circuit. Luckily, a 2M linear pot does the job at a pinch.



..... Phil

[email protected] February 6th 18 11:31 PM

Pot tapers
 
On Wed, 31 Jan 2018 14:50:55 -0800, MOP CAP wrote:

My sone has posted the catalog sheet I promised on

http://www.bartlettstreet.com/electronics/PotTapers.jpg

CP


Thanks for that info. I saved that .jpg for reference.
I never knew there were that many variations. I once thought there were
only two kinds of pots, linear and audio. Maybe that was true on the old
tube gear, but not these days.

What catalog did that come from?

---
As an update on my Altec Lansing preamp. Altec no longer makes any of
their electronics, or even has parts. The phone number is not even valid
anymore. They only make speakers now.

I think I can glue some shaft onto the broken stub, so that's what I'll
have to do. At least the pot is still good. In the meantime, I'll be
watching ebay for an identical model which is being sold for parts.
Often they sell cheaply. I plan to keep this preamp, so spare parts
would be good to have.


MOP CAP[_2_] February 6th 18 11:58 PM

Pot tapers
 
I think it can from a Centralab. The only indication is CRL in a
diamond in the lower corner of the full page.
Glad it was of use.
CP



All times are GMT +1. The time now is 10:03 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter