DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   USB Hub not working (https://www.diybanter.com/electronics-repair/602580-usb-hub-not-working.html)

[email protected] December 30th 17 06:02 AM

USB Hub not working
 
I have one of these USB hubs with several USB connectors, which plugs
into a single USB port on a computer. It dont work. If I plug in a flash
drive directly to the computer, I can access that drive. But if I plug
it into the hub, the drive never shows up. I tried this on 3 computers.

I opened that hub, and there is a circuit board, with each output port
connected to a trace on the board which goes to a black dot on the
board. I dont know what that "dot" is, but I assume it's a chip of some
sort, and it looks like the dot itself was some sort of epoxy placed in
the board.

This was a gift, and it's going to get returned to the store, but I am
just wondering what kind of circuit this is?

Until looking at the innards, I thought that these hubs were just a
direct connection to the input (from computer) USB. But I see there is
more to it....


mike[_22_] December 30th 17 07:33 AM

USB Hub not working
 
On 12/29/2017 9:02 PM, wrote:
I have one of these USB hubs with several USB connectors, which plugs
into a single USB port on a computer. It dont work. If I plug in a flash
drive directly to the computer, I can access that drive. But if I plug
it into the hub, the drive never shows up. I tried this on 3 computers.

I opened that hub, and there is a circuit board, with each output port
connected to a trace on the board which goes to a black dot on the
board. I dont know what that "dot" is, but I assume it's a chip of some
sort, and it looks like the dot itself was some sort of epoxy placed in
the board.

This was a gift, and it's going to get returned to the store, but I am
just wondering what kind of circuit this is?

Until looking at the innards, I thought that these hubs were just a
direct connection to the input (from computer) USB. But I see there is
more to it....

Which version of which operating system?
How old is the computer?
What happens when you try it on a different computer?
What does device manager say?
What happens when you boot a linux live CD?
Make/model of the hub? Somebody may have one and actually have
a direct answer.
There were hubs that required you to install a driver,
but that was a LONG time ago.
But "oldschool tubes" suggests you might have really old stuff ;-)

rickman December 30th 17 09:03 AM

USB Hub not working
 
wrote on 12/30/2017 12:02 AM:
I have one of these USB hubs with several USB connectors, which plugs
into a single USB port on a computer. It dont work. If I plug in a flash
drive directly to the computer, I can access that drive. But if I plug
it into the hub, the drive never shows up. I tried this on 3 computers.

I opened that hub, and there is a circuit board, with each output port
connected to a trace on the board which goes to a black dot on the
board. I dont know what that "dot" is, but I assume it's a chip of some
sort, and it looks like the dot itself was some sort of epoxy placed in
the board.

This was a gift, and it's going to get returned to the store, but I am
just wondering what kind of circuit this is?

Until looking at the innards, I thought that these hubs were just a
direct connection to the input (from computer) USB. But I see there is
more to it....


USB is a point to point interface unlike some versions of Ethernet (using
coax) or an RS-485 multipoint interface. To connect more than one device to
a USB port requires a hub. The hub has a chip which receives packets sent
from the computer as well as packets received from any of the down stream
ports, buffers them and retransmits them on the appropriate other port.
That multiport interface chip is what is under the blob of epoxy on your
board. They use a chip directly with no package because it saves a few
pennies.

When you plug the hub into your computer it should show up as a hub. Under
windows you can go into the device manager and find it there. If the driver
did not install correctly it will show with a yellow error symbol next to it
and be listed as an unidentified device. If it doesn't show in the device
manager list at all while the flash drive works in the PC port, the hub is
defective. If it shows up but with the driver error, you may need to search
the Internet to find a driver.

--

Rick C

Viewed the eclipse at Wintercrest Farms,
on the centerline of totality since 1998

Rob[_40_] December 30th 17 12:04 PM

USB Hub not working
 
wrote:
I have one of these USB hubs with several USB connectors, which plugs
into a single USB port on a computer. It dont work. If I plug in a flash
drive directly to the computer, I can access that drive. But if I plug
it into the hub, the drive never shows up. I tried this on 3 computers.

I opened that hub, and there is a circuit board, with each output port
connected to a trace on the board which goes to a black dot on the
board. I dont know what that "dot" is, but I assume it's a chip of some
sort, and it looks like the dot itself was some sort of epoxy placed in
the board.

This was a gift, and it's going to get returned to the store, but I am
just wondering what kind of circuit this is?

Until looking at the innards, I thought that these hubs were just a
direct connection to the input (from computer) USB. But I see there is
more to it....


There are hubs that come with a power supply so they can deliver more
power to the connected devices than can be supplied by a single port
at the computer, and there are hubs without powersupply.

It may be that yours has the powersupply misplaced and won't work
without it. Look for an extra connector on the case that is not a
USB input or output.

Jasen Betts[_2_] December 30th 17 12:37 PM

USB Hub not working
 
On 2017-12-30, wrote:
I have one of these USB hubs with several USB connectors, which plugs
into a single USB port on a computer. It dont work. If I plug in a flash
drive directly to the computer, I can access that drive. But if I plug
it into the hub, the drive never shows up. I tried this on 3 computers.

I opened that hub, and there is a circuit board, with each output port
connected to a trace on the board which goes to a black dot on the
board. I dont know what that "dot" is, but I assume it's a chip of some
sort, and it looks like the dot itself was some sort of epoxy placed in
the board.

This was a gift, and it's going to get returned to the store, but I am
just wondering what kind of circuit this is?


The blob conceals an silicon chip mounted on the board this type of
construction is called "Chip On Board" or "COB" the chip does the
signal routing, translation, and forwarding and needed to support
USB hubbing

Until looking at the innards, I thought that these hubs were just a
direct connection to the input (from computer) USB. But I see there is
more to it....


Yeah, somehow they call it USB but electrically it's not what I would
consider to be a bus.

--
This email has not been checked by half-arsed antivirus software

[email protected] December 30th 17 01:39 PM

USB Hub not working
 
On Saturday, December 30, 2017 at 12:02:58 AM UTC-5, wrote:

I opened that hub, and there is a circuit board,SNIP

This was a gift, and it's going to get returned to the store, but I am
just wondering what kind of circuit this is?
SNIP


The moment you opened the device, you lost the right to return it. Full stop.

Peter Wieck
Melrose Park, PA




Terry Schwartz December 31st 17 03:18 AM

USB Hub not working
 
Return it? Those are give-aways. Toss it.


All times are GMT +1. The time now is 07:11 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter