Can't drive MicroPlanet Gravity properly
 

I've annoyed myself because though I have subscribed to alt.computer as
recommended here, I cannot see the list of the posts in the "Thread
pane" so cannot read the posts.

I'm sure that happened to me before, and was due to some obscure setting
that makes each item in the list zero pixels high, or something. That
time, I found the cure and applied it successfully but cannot now
remember (creeping senescence) or retrieve what that cure was...

Can anyone give me a nudge, please?

Mike.

Can't drive MicroPlanet Gravity properly
 

On 2017/05/21 2:20 AM, MJC wrote:
I've annoyed myself because though I have subscribed to alt.computer as
recommended here, I cannot see the list of the posts in the "Thread
pane" so cannot read the posts.

I'm sure that happened to me before, and was due to some obscure setting
that makes each item in the list zero pixels high, or something. That
time, I found the cure and applied it successfully but cannot now
remember (creeping senescence) or retrieve what that cure was...

Can anyone give me a nudge, please?

Mike.


Not knowing what your Usenet reader is or your feed I can only tell you
that when I used Thunderbird 52.1.1 (64-bit) on my MacBook Pro running
OSX 10.10.5 and pulling in Usenet from Giganews it is extremely easy to
add alt.computers (or any of the sub-groups) to my email/usenet list.

There is not a lot of chatter on a.c, a few posts a day it appears -
routers and IP cameras being the most recent chatter.

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."

Can't drive MicroPlanet Gravity properly
 

In article ,
says...

On 2017/05/21 2:20 AM, MJC wrote:
I've annoyed myself because though I have subscribed to alt.computer as
recommended here, I cannot see the list of the posts in the "Thread
pane" so cannot read the posts.

I'm sure that happened to me before, and was due to some obscure setting
that makes each item in the list zero pixels high, or something. That
time, I found the cure and applied it successfully but cannot now
remember (creeping senescence) or retrieve what that cure was...

Can anyone give me a nudge, please?

Mike.


Not knowing what your Usenet reader is or your feed I can only tell you
that when I used Thunderbird 52.1.1 (64-bit) on my MacBook Pro running
OSX 10.10.5 and pulling in Usenet from Giganews it is extremely easy to
add alt.computers (or any of the sub-groups) to my email/usenet list.

There is not a lot of chatter on a.c, a few posts a day it appears -
routers and IP cameras being the most recent chatter.

John :-#)#

Thanks John, and I too am sometimes guilty of not reading the subject
line in conjunction with the body to get the full message (that is where
I specified my newsreader). And the "newsgroup pane" displays the
number of un-read threads that should show up in the threads pane, so I
know that alt.computer (singular) should not be empty!

I am writing this in Gravity, which I have removed and re-installed; it
seems to be only my latest subscribed NG (a.c) that is giving me
trouble...

Mike.

Can't drive MicroPlanet Gravity properly
 

In article ,
says...

In article ,
says...

On 2017/05/21 2:20 AM, MJC wrote:
I've annoyed myself because though I have subscribed to alt.computer as
recommended here, I cannot see the list of the posts in the "Thread
pane" so cannot read the posts.

I'm sure that happened to me before, and was due to some obscure setting
that makes each item in the list zero pixels high, or something. That
time, I found the cure and applied it successfully but cannot now
remember (creeping senescence) or retrieve what that cure was...

Can anyone give me a nudge, please?

Mike.


Not knowing what your Usenet reader is or your feed I can only tell you
that when I used Thunderbird 52.1.1 (64-bit) on my MacBook Pro running
OSX 10.10.5 and pulling in Usenet from Giganews it is extremely easy to
add alt.computers (or any of the sub-groups) to my email/usenet list.

There is not a lot of chatter on a.c, a few posts a day it appears -
routers and IP cameras being the most recent chatter.

John :-#)#

Thanks John, and I too am sometimes guilty of not reading the subject
line in conjunction with the body to get the full message (that is where
I specified my newsreader). And the "newsgroup pane" displays the
number of un-read threads that should show up in the threads pane, so I
know that alt.computer (singular) should not be empty!

I am writing this in Gravity, which I have removed and re-installed; it
seems to be only my latest subscribed NG (a.c) that is giving me
trouble...

[xposting to news.software.readers]

Since it's only one newsgroup that's affected, have you had a look at
Newsgroup Properties to see if there's a setting there that may have
mistakenly been applied to the NG in question, such as a Filter?

--
Dave (brought to you via Gravity 3.0.4)

Can't drive MicroPlanet Gravity properly
 

On 2017/05/22 1:13 AM, Mike Coon wrote:
In article ,
says...

On 2017/05/21 2:20 AM, MJC wrote:
I've annoyed myself because though I have subscribed to alt.computer as
recommended here, I cannot see the list of the posts in the "Thread
pane" so cannot read the posts.

I'm sure that happened to me before, and was due to some obscure setting
that makes each item in the list zero pixels high, or something. That
time, I found the cure and applied it successfully but cannot now
remember (creeping senescence) or retrieve what that cure was...

Can anyone give me a nudge, please?

Mike.


Not knowing what your Usenet reader is or your feed I can only tell you
that when I used Thunderbird 52.1.1 (64-bit) on my MacBook Pro running
OSX 10.10.5 and pulling in Usenet from Giganews it is extremely easy to
add alt.computers (or any of the sub-groups) to my email/usenet list.

There is not a lot of chatter on a.c, a few posts a day it appears -
routers and IP cameras being the most recent chatter.

John :-#)#

Thanks John, and I too am sometimes guilty of not reading the subject
line in conjunction with the body to get the full message (that is where
I specified my newsreader). And the "newsgroup pane" displays the
number of un-read threads that should show up in the threads pane, so I
know that alt.computer (singular) should not be empty!

I am writing this in Gravity, which I have removed and re-installed; it
seems to be only my latest subscribed NG (a.c) that is giving me
trouble...

Mike.


Hi Mike,

Oh...yeah, thought the subject line was about something else, did not
realize it was a usenet reader. Have only used a few myself (T-Bird,
Eudora, and Agent) so hadn't dumped it into a search engine to see what
it was. And now I see that it is for Windoze so being a Mac idiot I
would never run across it.

I guess this is a "Bug Reports" sort of thing now...

John :-#)#



--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."

Can't drive MicroPlanet Gravity properly
 

In article ,
says...

I guess this is a "Bug Reports" sort of thing now...

Yes, thanks, I'd think that too except for this vague recollection it
has happened before. Though anything so tricky should be a bug not a
feature!

BTW There's another funny: on every other NG, switching from one to
another in the NG pane makes the threads pane also switch to the new set
of threads as shown by the local threads count. But not a.c - the
threads pane still shows the previous NG's set...

Mike.