I just picked up a XAM model 200 amplifier. It was cheap, and I thought
it would be a nice small and simple amp for computer speakers. It's
nothing fancy, just a basic amp with bass, treble, balance and volume
controls, and input for tuner (aux) or phono. Probably outputs around 15
W per channel. (plenty for some bookshelf speakers connected to a
computer or MP3 player).

It works fine, and sounds good. It is solid state and has a nice solid
chassis and alum front panel. It says made in Taiwan on the back.
Actually, it did not work when I got it. In fact it was dead. But the
fuse holder was loose, and when I opened it, the wire was broke off the
fuse holder. A bit of solder fixed that, and I tightended the fuse hldr.
A quick and simple repair. (I put a little pure silicone caulk on the
fuse hldr nut to keep it tight).

It appears to be from the late 60s or early 70s.
Possibly sold by Olson electronics (I remember that store).

Anyhow, all I can find is one discussion group website:
http://audiokarma.org/forums/index.p...ge-amps.577544

Photo he
http://i1176.photobucket.com/albums/...ps82uwrt1y.jpg

I dont really need a schematic at the moment, but I like to have one for
all electronic stuff I own.

As usual, Google is not cooperating. Giving me schematics for everything
except what I am looking for.....

Do any of you know a better way to locate this schematic?

Thanks

Good morning,

I couldn't recall if XAM was a house brand for Sam Goody record stores,
or E.J.Korvette's. Looking on E-bay, it was a house brand for
Korvette's. I once heard a story that "XAM" was "MAX" spelled
backwards, and the MAX was the owner's (of Korvette's) dog. I've no
idea if there is any truth to it.

Regards,
Tim

P.S. You'll find some XAM products listed on e-bay.


On 3/27/2017 4:38 AM, wrote:
I just picked up a XAM model 200 amplifier. It was cheap, and I thought
it would be a nice small and simple amp for computer speakers. It's
nothing fancy, just a basic amp with bass, treble, balance and volume
controls, and input for tuner (aux) or phono. Probably outputs around 15
W per channel. (plenty for some bookshelf speakers connected to a
computer or MP3 player).

It works fine, and sounds good. It is solid state and has a nice solid
chassis and alum front panel. It says made in Taiwan on the back.
Actually, it did not work when I got it. In fact it was dead. But the
fuse holder was loose, and when I opened it, the wire was broke off the
fuse holder. A bit of solder fixed that, and I tightended the fuse hldr.
A quick and simple repair. (I put a little pure silicone caulk on the
fuse hldr nut to keep it tight).

It appears to be from the late 60s or early 70s.
Possibly sold by Olson electronics (I remember that store).

Anyhow, all I can find is one discussion group website:
http://audiokarma.org/forums/index.p...ge-amps.577544

Photo he
http://i1176.photobucket.com/albums/...ps82uwrt1y.jpg

I dont really need a schematic at the moment, but I like to have one for
all electronic stuff I own.

As usual, Google is not cooperating. Giving me schematics for everything
except what I am looking for.....

Do any of you know a better way to locate this schematic?

Thanks

Good morning,

I couldn't recall if XAM was a house brand for Sam Goody record stores,
or E.J.Korvette's. Looking on E-bay, it was a house brand for
Korvette's. I once heard a story that "XAM" was "MAX" spelled
backwards, and the MAX was the owner's (of Korvette's) dog. I've no
idea if there is any truth to it.

Regards,
Tim

P.S. You'll find some XAM products listed on e-bay.


On 3/27/2017 4:38 AM, wrote:
I just picked up a XAM model 200 amplifier. It was cheap, and I thought
it would be a nice small and simple amp for computer speakers. It's
nothing fancy, just a basic amp with bass, treble, balance and volume
controls, and input for tuner (aux) or phono. Probably outputs around 15
W per channel. (plenty for some bookshelf speakers connected to a
computer or MP3 player).

It works fine, and sounds good. It is solid state and has a nice solid
chassis and alum front panel. It says made in Taiwan on the back.
Actually, it did not work when I got it. In fact it was dead. But the
fuse holder was loose, and when I opened it, the wire was broke off the
fuse holder. A bit of solder fixed that, and I tightended the fuse hldr.
A quick and simple repair. (I put a little pure silicone caulk on the
fuse hldr nut to keep it tight).

It appears to be from the late 60s or early 70s.
Possibly sold by Olson electronics (I remember that store).

Anyhow, all I can find is one discussion group website:
http://audiokarma.org/forums/index.p...ge-amps.577544

Photo he
http://i1176.photobucket.com/albums/...ps82uwrt1y.jpg

I dont really need a schematic at the moment, but I like to have one for
all electronic stuff I own.

As usual, Google is not cooperating. Giving me schematics for everything
except what I am looking for.....

Do any of you know a better way to locate this schematic?

Thanks

ElectroVoice job-shopped for several house brands, including XAM. You may have luck pursuing that avenue.

Peter Wieck
Melrose Park, PA

On Mon, 27 Mar 2017, wrote:

ElectroVoice job-shopped for several house brands, including XAM. You may have luck pursuing that avenue.

"Xam" was a real product name?

There was an article in Electronics Illustrated in the sixties with a
title like "what the heck is a Xam?" (about house brands) and I always
assumed Xam was a made up name.

Michael

On Monday, March 27, 2017 at 1:29:31 PM UTC-4, Michael Black wrote:


"Xam" was a real product name?

Sure was. EJ Korvette's

An early, much smaller version of WalMart.

Vornado was their appliance brand - which survived the demise of Korvette's.

Peter Wieck
Melrose Park, PA

On Mon, 27 Mar 2017 10:49:12 -0700 (PDT), "
wrote:

On Monday, March 27, 2017 at 1:29:31 PM UTC-4, Michael Black wrote:


"Xam" was a real product name?

Sure was. EJ Korvette's

An early, much smaller version of WalMart.

Vornado was their appliance brand - which survived the demise of Korvette's.

Peter Wieck
Melrose Park, PA

I never heard of EJ Korvette's, but it appears that's the source of
these amps according to what you guys replied. But yes, XAM was a real
product name. (The story about Max the dog, backwards is interesting).

The photo of this amp, which I posted the URL in the original message on
here, shows what I have. It's a nice amp for what it is.... Nothing
fancy, just a basic amp with decent sound.

I am still wondering if Olson electronics may have sold them later on, I
know most Olson stuff was closeouts from other companies. I loved Olson,
it was a fun place with great deals.

Either way, it looks like I will never find a schematic for this amp,
but I thought I'd ask anyhow.