DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   SD card pops out (https://www.diybanter.com/electronics-repair/587014-sd-card-pops-out.html)

[email protected] March 4th 17 08:42 PM

SD card pops out
 

Is it advisable to put duct tape over the SD slot to keep it from popping out


- = -
Vasos Panagiotopoulos, Columbia'81+, Reagan, Mozart, Pindus, BioStrategist
http://www.panix.com/~vjp2/vasos.htm
---{Nothing herein constitutes advice. Everything fully disclaimed.}---
[Homeland Security means private firearms not lazy obstructive guards]
[Urb sprawl confounds terror] [Phooey on GUI: Windows for subprime Bimbos]





N_Cook March 4th 17 09:21 PM

SD card pops out
 
On 04/03/2017 20:42, wrote:
Is it advisable to put duct tape over the SD slot to keep it from popping out


- = -
Vasos Panagiotopoulos, Columbia'81+, Reagan, Mozart, Pindus, BioStrategist
http://www.panix.com/~vjp2/vasos.htm
---{Nothing herein constitutes advice. Everything fully disclaimed.}---
[Homeland Security means private firearms not lazy obstructive guards]
[Urb sprawl confounds terror] [Phooey on GUI: Windows for subprime Bimbos]





Just 1 SD , or all of them?

Michael Black[_2_] March 4th 17 10:55 PM

SD card pops out
 
On Sat, 4 Mar 2017, wrote:


Is it advisable to put duct tape over the SD slot to keep it from popping out

No, not SD cards.

But the first time I got a microSD card (actually it was some variant,
loaded with MP3 songs for my Sansa Fuze), I put it in, but didn't push it
in enough, and it popped out, flying across the room. I did find it, and
without too much effort. But now I know to be careful when handling a
microSD card.

But other than when putting that in, I've never had problems with SD or
microSD cards. They seem to stay in with no problem unless you bump them.

Note that many things like cameras have covers over the card slot, so no
need for tape anyway.

Michael

[email protected] March 5th 17 01:46 PM

SD card pops out
 
spray cards n slot with CRC electronics clear from Walmart n hardware

the card is not engaging ...also prob your insertion is not straight forward ie tilt runs up n over engage mechanism.

my Marantz pmd has a door problem. twisted 3M electrical tap into loop forced over case holds door shut after slipping a quarter between door n tape loop.

hitech


All times are GMT +1. The time now is 11:29 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter