DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   TV not receiving Channel 2 (https://www.diybanter.com/electronics-repair/585486-tv-not-receiving-channel-2-a.html)

Newgene McMensa February 6th 17 04:51 AM

TV not receiving Channel 2
 
Toshiba LCD TV Model 22C1004, made in Nov 2010.

This has been a great TV, with lots of extra features that other small TV's don't have. All of a sudden, channel 2.1 and 2.2 are not coming in. The signal strength indicator does even register. All other channels are fine.

First thing I did was to unplug it, reset it and the scan all the channels. All channels came back except 2.1 and 2.2.

I have a rooftop antenna with the lead going to a splitter and then to this TV and another one. Next thing I did was to swap the cable connections at each TV. So the connections and cables are eliminated as problems

Any ideas what could cause this, or hot to troubleshoot it?



Newgene McMensa February 6th 17 04:55 AM

TV not receiving Channel 2
 
Typos corrected...

Toshiba LCD TV Model 22C1004, made in Nov 2010.

This has been a great TV, with lots of extra features that other small TV's don't have. All of a sudden, channel 2.1 and 2.2 are not coming in. The signal strength indicator does not even register. All other channels are fine.

First thing I did was to unplug it, reset it and the scan all the channels. All channels came back except 2.1 and 2.2.

I have a rooftop antenna with the lead going to a splitter and then to this TV and another one. Next thing I did was to swap the cable connections at each TV. Toshiba still no 2.1 or 2.2. Other TV show both fine. So the connections and cables are eliminated as problems

Any ideas what could cause this, or hot to troubleshoot it?



Phil Allison[_3_] February 6th 17 05:39 AM

TV not receiving Channel 2
 
Newgene McMensa wrote:

Toshiba LCD TV Model 22C1004, made in Nov 2010.

This has been a great TV, with lots of extra features that other small TV's don't have. All of a sudden, channel 2.1 and 2.2 are not coming in. The signal strength indicator does even register. All other channels are fine.

First thing I did was to unplug it, reset it and the scan all the channels. All channels came back except 2.1 and 2.2.

I have a rooftop antenna with the lead going to a splitter and then to this TV and another one. Next thing I did was to swap the cable connections at each TV. So the connections and cables are eliminated as problems

Any ideas what could cause this, or hot to troubleshoot it?



** Sounds like the UHF part of the tuner in the Toshiba has failed.



...... Phil

Bruce Esquibel[_2_] February 6th 17 10:32 AM

TV not receiving Channel 2
 
Phil Allison wrote:

** Sounds like the UHF part of the tuner in the Toshiba has failed.


It would be helpful if the OP would give a city or zip code where they
live.

Here in Chicago, the local "channel 2" I beleive is still on a vhf channel.

They are digital 2 and 2.1 but the transmitter is either on the old channel
7 or 13.

People who install those uhf only antennas find out about that the hard way.

So it's possible the vhf side of the tuner failed or the outside antenna got
damaged somehow, the vhf channels would be the longer/longest elements.

-bruce


Phil Allison[_3_] February 6th 17 10:59 AM

TV not receiving Channel 2
 
Bruce Esquibel wrote:

Phil Allison

** Sounds like the UHF part of the tuner in the Toshiba has failed.


It would be helpful if the OP would give a city or zip code where they
live.

Here in Chicago, the local "channel 2" I beleive is still on a vhf channel.

They are digital 2 and 2.1 but the transmitter is either on the old channel
7 or 13.

People who install those uhf only antennas find out about that the hard way.

So it's possible the vhf side of the tuner failed or the outside antenna got
damaged somehow, the vhf channels would be the longer/longest elements.



** But the OP claims he has TWO sets on the same antenna - one of which is 100% OK.

That's gotta be a set fault.


..... Phil

amdx[_3_] February 6th 17 01:02 PM

TV not receiving Channel 2
 
On 2/5/2017 10:55 PM, Newgene McMensa wrote:
Typos corrected...

Toshiba LCD TV Model 22C1004, made in Nov 2010.

This has been a great TV, with lots of extra features that other small TV's don't have. All of a sudden, channel 2.1 and 2.2 are not coming in. The signal strength indicator does not even register. All other channels are fine.

First thing I did was to unplug it, reset it and the scan all the channels. All channels came back except 2.1 and 2.2.

I have a rooftop antenna with the lead going to a splitter and then to this TV and another one. Next thing I did was to swap the cable connections at each TV. Toshiba still no 2.1 or 2.2. Other TV show both fine. So the connections and cables are eliminated as problems

Any ideas what could cause this, or hot to troubleshoot it?



Does your neighbor still get those channels?
Maybe there not transmitting.
Mikek

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Phil Allison[_3_] February 6th 17 01:15 PM

TV not receiving Channel 2
 
amdx wrote:


Other TV show both fine.


Does your neighbor still get those channels?



** Wanked yourself blind ??

Rhetorical question.

Wot a dumb as dog**** poon.




.... Phil

Andrew Rossmann February 6th 17 03:16 PM

TV not receiving Channel 2
 
In article , says...

Phil Allison wrote:

** Sounds like the UHF part of the tuner in the Toshiba has failed.


It would be helpful if the OP would give a city or zip code where they
live.

Here in Chicago, the local "channel 2" I beleive is still on a vhf channel.

They are digital 2 and 2.1 but the transmitter is either on the old channel
7 or 13.

People who install those uhf only antennas find out about that the hard way.

So it's possible the vhf side of the tuner failed or the outside antenna got
damaged somehow, the vhf channels would be the longer/longest elements.


In Chicago, WBBM 2.1 and 2.2 are now duplicated on WMEU 48.3 and 48.4.
That was probably done due to issues with them being on RF12 (VHF Hi)
and many people using antennas that are UHF only. WMEU is a low-power
Class D station, but it transmits from the Willis (Sears) tower and has
pretty good range.

https://en.wikipedia.org/wiki/WMEU-CD

--
If there is a no_junk in my address, please REMOVE it before replying!
All junk mail senders will be prosecuted to the fullest extent of the
law!!
http://home.comcast.net/~andyross

amdx[_3_] February 6th 17 04:19 PM

TV not receiving Channel 2
 
On 2/6/2017 7:15 AM, Phil Allison wrote:
amdx wrote:


Other TV show both fine.


Does your neighbor still get those channels?



** Wanked yourself blind ??

Rhetorical question.

Wot a dumb as dog**** poon.


Hey Phil I think that's a new line, good on you.
Ya, I missed her line, "Next thing I did was to swap the cable
connections at each TV."
So she has other TVs that receive channel 2.x.
When a newsgroup produces so much ire in you life, why do you keep
reading? Or is being ****ed off all the time, just your life's excitement?

Mikek



Bruce Esquibel[_2_] February 7th 17 01:10 PM

TV not receiving Channel 2
 
Andrew Rossmann wrote:

In Chicago, WBBM 2.1 and 2.2 are now duplicated on WMEU 48.3 and 48.4.
That was probably done due to issues with them being on RF12 (VHF Hi)
and many people using antennas that are UHF only. WMEU is a low-power
Class D station, but it transmits from the Willis (Sears) tower and has
pretty good range.


Thanks for passing that tidbit along, you are correct.

-bruce


Benderthe.evilrobot February 7th 17 09:19 PM

TV not receiving Channel 2
 

"Phil Allison" wrote in message
...
Bruce Esquibel wrote:

Phil Allison

** Sounds like the UHF part of the tuner in the Toshiba has failed.


It would be helpful if the OP would give a city or zip code where they
live.

Here in Chicago, the local "channel 2" I beleive is still on a vhf
channel.

They are digital 2 and 2.1 but the transmitter is either on the old
channel
7 or 13.

People who install those uhf only antennas find out about that the hard
way.

So it's possible the vhf side of the tuner failed or the outside antenna
got
damaged somehow, the vhf channels would be the longer/longest elements.



** But the OP claims he has TWO sets on the same antenna - one of which is
100% OK.

That's gotta be a set fault.


Maybe corrupted data on a user settings EEPROM.

Or if the affected channels are on a different band, they could be on a
second tuner that could have died.


Jeroni Paul February 9th 17 08:10 PM

TV not receiving Channel 2
 
Modern tuners include VHF and UHF sections in the same can and share many sections. I've had the opposite problem with VHF working and UHF not, so if the signal is OK the tuner is suspect. It could be the signal strenght is low in the reception limit and one TV is better at low strenghts than the other.


All times are GMT +1. The time now is 07:14 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter