Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #121   Report Post  
Posted to comp.mobile.android,rec.autos.tech,alt.home.repair,sci.electronics.repair
external usenet poster
 
Posts: 284
Default Advice requested from those of you who have successfully checked camber at home

John Harmon wrote:
Scott Dorsey actually said:

Thirdly, if he didn't know any of these things, it should have taken him
less than five minutes to find the leak with a can of starting fluid. There
is ABSOLUTELY NO EXCUSE for someone to bring out the smoke machine for that
sort of leak unless they are trying really hard to find ways to bill their
customers for something.


This is dead wrong.
Everyone knows that hack.
It doesn't work for the E39.
It might have worked for 1970's era cars, but not the E39.
There just isn't any change in the engine speed no matter where or how or
what you spray on the underside of the plenum.
The leak is just too slight and the difference in engine speed too slight
and the chance of getting the fuel from the plenum to the plugs too slight.


If you're just spraying and not poking and prodding that's likely true, and
a lot of less severe hose cracks won't get found that way unless you are
pulling and stretching on the hose as you're hitting it.

But the plenum is easy, you just squeeze the body and shake it back and
forth. Of course, likely you won't even need the spray because it'll
come apart in your hands.

You are definitely right that the E39 is a lot more of a pain to find leaks
in than the E30 and earlier vintage cars and more sensitive to smaller leaks.
Sometimes the smoke machine IS needed. But sometimes you should be able to
look at the plenum and see cracks and just replace the damn thing whether or
not it's leaking, because you know it's going to start leaking soon.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Headboard Assembly Advice Requested DerbyDad03 Woodworking 13 August 13th 16 09:42 PM
Laborious finishing, and advice requested. Greg Guarino[_2_] Woodworking 6 November 18th 14 07:00 PM
Situation advice requested [email protected] Home Repair 62 December 28th 09 05:28 AM
Peppermill advice requested.... Eddie Munster Woodturning 4 December 28th 06 04:28 PM
Advice requested - make or buy? Or? Lane Metalworking 16 May 24th 05 01:34 AM


All times are GMT +1. The time now is 12:09 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"