MITSUBISHI VS60VX2 Component ID Needed
 

Hello Group:
Have a Mits. model VS60VX2 in shop with some burnt and blown up
resistors and need help to ID them please.
The resistors are in circuit with Q4A03 and Q4A04, associated with
the Vertical Deflection.
BOARD LOCATIONS A
R4A52, R4A56, R4A57, and R4A58.
Any help would be greatly appreciated.
T.I.A.
Jim

MITSUBISHI VS60VX2 Component ID Needed
 

V12 chassis. I have manuals for the V12B chassis and they should be the
same. Q4A03 and Q4A04 are top/bottom pincushion outputs, btw, not vertical
deflection which is IC401.

R4A52 .82 ohm .5w fuse resistor
R4A56 100ohm .25w
R4A57 10ohm .25w
R4A58 100ohm .25w

Better check all of the electrolytics in this set. We typically replace
between 12 and 60 caps in these for electrolyte leakage and high esr.

Leonard

wrote in message
...
Hello Group:
Have a Mits. model VS60VX2 in shop with some burnt and blown up
resistors and need help to ID them please.
The resistors are in circuit with Q4A03 and Q4A04, associated with
the Vertical Deflection.
BOARD LOCATIONS A
R4A52, R4A56, R4A57, and R4A58.
Any help would be greatly appreciated.
T.I.A.
Jim