 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
RCA TV - Sound Good, No Picture, Menu Works
RCA TV
Model: F36665 Chassis: CTC203CX Last night we turned on this TV and we do not get a picture from any of the inputs. The sound works fine and all the menus display fine. I saw a few messages relating to the L14401 inductor coil on this chassis having an issue, but it sounded like I should not see the any picutre including the menus if that was the problem. Anybody have any thoughts on what to do to solve this issue? - Sean |
|
#2
|
|||
|
|||
|
RCA TV - Sound Good, No Picture, Menu Works
On 3 Jun 2004 13:26:11 -0500, madcap wrote:
RCA TV Model: F36665 Chassis: CTC203CX Last night we turned on this TV and we do not get a picture from any of the inputs. The sound works fine and all the menus display fine. - Sean You're correct this is not related to L14401 problem as this will cause nothing on the tube. This is more involved repair. Get a estimate if yours is out of warranty from a shop that does RCA for a living. Menu images from micro goes directly to another chip bypassing the video circuits, therefore that tv has a problem with video path. Cheers, Wizard |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Simple question regarding Ceiling tiles and sound? | UK diy | |||
| Sound but no picture in Toshiba 13" tv: model CZ13M21 | Electronics Repair | |||
| Zenith color menu, bw picture | Electronics Repair | |||
| Knife Steel FAQ updated | Metalworking | |||
Linear Mode
