DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Beam (https://www.diybanter.com/electronics-repair/44763-beam.html)

Captin Kirk May 12th 04 07:05 AM

Beam
 
Every time we try to beam up tribbles , they beam into the transporter room
looking like cats and not Tribbles .

Should we look for cold solder joints on the transporter control board ? Or
should we just use them as is , to control the mice population aboard the
USS Enterprise ? Could the problem be a bad eprom chip ?

Kirk out .




Tim Kettring May 12th 04 07:30 AM

Beam
 
"Captin Kirk" wrote in message
...
Every time we try to beam up tribbles , they beam into the transporter

room
looking like cats and not Tribbles .

Should we look for cold solder joints on the transporter control board ?

Or
should we just use them as is , to control the mice population aboard the
USS Enterprise ? Could the problem be a bad eprom chip ?

Kirk out .

It could be a problem with the filter caps in the anti-matter generator ,
feeding the transporter board with dirty voltage . Ask Mr Spock to check the
voltage with a 100,000,000 tetrahertz oscilloscope . I like tribbles , they
taste like chicken .




Mac Gyver May 12th 04 12:02 PM

Beam
 
It could be a problem with the filter caps in the anti-matter generator ,
feeding the transporter board with dirty voltage . Ask Mr Spock to check

the
voltage with a 100,000,000 tetrahertz oscilloscope .


Bull****! First you have to collect as much cerumen you can from your ears,
then you have to impregnate a MARS (tm) or MilkyWay (tm) wrapping with it.
Then collect some dirt between your toes and cover the impregnated wrapping
with it. Then you have to put this home made capacitor, which capacity
should be exactly 47 GigaF, between the green and the yellow wires.



Asimov May 13th 04 01:42 PM

Beam
 
"Tim Kettring" bravely wrote to "All" (12 May 04 02:30:13)
--- on the heady topic of " Beam"

TK From: "Tim Kettring"

TK "Captin Kirk" wrote in message
TK ...
Every time we try to beam up tribbles , they beam into the transporter

room
looking like cats and not Tribbles .

Should we look for cold solder joints on the transporter control board ?

Or
should we just use them as is , to control the mice population aboard the
USS Enterprise ? Could the problem be a bad eprom chip ?

Kirk out .

TK It could be a problem with the filter caps in the anti-matter
TK generator , feeding the transporter board with dirty voltage . Ask Mr
TK Spock to check the voltage with a 100,000,000 tetrahertz oscilloscope .
TK I like tribbles , they taste like chicken .

Hell it does! Everything tastes more or less like chicken anyways!
But chickens are a heck of a lot easier to pluck, one can't tell
which end is which on a Tribble!

.... Bad Beer Rots Our Young Guts But Vodka Goes Well.



All times are GMT +1. The time now is 12:31 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter