Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
CD player won't play track 1
I have a Fisher "Studio Standard" home sound system with a tuner, amp,
mixer, double casette deck, and CD player -- all as separate modules. Everything functions except the CD player (Model AD913), and it does ok except it rarely will play track 1. It generally reads all other tracks fine, but sometimes stalls on those too. A cleaning CD doesn't fix the problem. Took the cabinet top off and the optical sensor (or whatever it's called) moves incrementally each time the track selector button is pushed, so it appears it is positioning as it should. I'm a ham and willing to tackle technical suggestions. Thanks. Eric |
#2
|
|||
|
|||
CD player won't play track 1
"Smith" writes:
I have a Fisher "Studio Standard" home sound system with a tuner, amp, mixer, double casette deck, and CD player -- all as separate modules. Everything functions except the CD player (Model AD913), and it does ok except it rarely will play track 1. It generally reads all other tracks fine, but sometimes stalls on those too. A cleaning CD doesn't fix the problem. Took the cabinet top off and the optical sensor (or whatever it's called) moves incrementally each time the track selector button is pushed, so it appears it is positioning as it should. I'm a ham and willing to tackle technical suggestions. Thanks. Check the lubrication and sled motor. See the CD repair guide for more info. --- sam | Sci.Electronics.Repair FAQ Home Page: http://www.repairfaq.org/ Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/ +Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm | Mirror Site Info: http://www.repairfaq.org/REPAIR/F_mirror.html Important: The email address in this message header may no longer work. To contact me, please use the feedback form on the S.E.R FAQ Web sites. |
#3
|
|||
|
|||
CD player won't play track 1
"Smith" wrote in message ... I have a Fisher "Studio Standard" home sound system with a tuner, amp, mixer, double casette deck, and CD player -- all as separate modules. Everything functions except the CD player (Model AD913), and it does ok except it rarely will play track 1. It generally reads all other tracks fine, but sometimes stalls on those too. A cleaning CD doesn't fix the problem. Took the cabinet top off and the optical sensor (or whatever it's called) moves incrementally each time the track selector button is pushed, so it appears it is positioning as it should. I'm a ham and willing to tackle technical suggestions. Thanks. It's possible the CD spin motor is weak... track 1 needs the highest speed. Does it take long to 'spin up'? Viper Eric |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
CD player problem... | Electronics Repair | |||
Car cassette player will eject and not play tape | Electronics Repair |