Philips TV shutting down in AV mode.
I need help ........
Make: Philips TV Model: 29PT6361/79B (manual also mentions 29PT6021/5) Chassis: A10A/AA Problem: Set works fine off air but when any of the AV inputs are selected, the set shuts down. The expected picture looks fine for the few seconds before shut down. According to the manual & flashing front indicator the problem is missing + or - 13v to vertical stage .... this is not the case. When looking at the error log, its is either the missing vertical supply or I2C problems (various random error codes). About 6 months ago we called to set up a DVD on this set & only one AV input worked then (the customer was happy to leave it that way). We have also been told that over the last month the kids have been retrying selecting AV a number of times & eventually it would work. Any clues would be appreciated. -- Australia isn't "down under", it's "off to one side"! www.stanblaz.customer.netspace.net.au www.cobracat.com (home of the Australian Cobra Catamaran) |
Philips TV shutting down in AV mode.
Well, nodoby's got you yet so here goes;
Typically you set the Hfreq to 50Hz higher then the expected signal. This is because of the range of input to the APC. It is late, repost ande I'll give you a better answer, but NAP told me 50Hz high, no higher. It shouldn't be different even on a diffrent TV system. JURB |
All times are GMT +1. The time now is 01:11 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter