Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Panasonic TV Shutdown
I have a 7yr old (Mfd: 8/96) Panasonic TV model CT-27G11U that seems to
sporadically shut down. There is no popping noise or video changes prior to shutdown. After shutdown it will not power on again for several seconds. Some days it will shut down several times after varying delay times (some quite short), other days - not at all. Any help would be appreciated. Thank you. |
#2
|
|||
|
|||
Panasonic TV Shutdown
Dry joint?
I have a 7yr old (Mfd: 8/96) Panasonic TV model CT-27G11U that seems to sporadically shut down. There is no popping noise or video changes prior to shutdown. After shutdown it will not power on again for several seconds. Some days it will shut down several times after varying delay times (some quite short), other days - not at all. Any help would be appreciated. Thank you. __ __ __ __ __ Regards, Chris [spamblock used] |
#3
|
|||
|
|||
Panasonic TV Shutdown
Dry joint?
I have a 7yr old (Mfd: 8/96) Panasonic TV model CT-27G11U that seems to sporadically shut down. There is no popping noise or video changes prior to shutdown. After shutdown it will not power on again for several seconds. Some days it will shut down several times after varying delay times (some quite short), other days - not at all. Any help would be appreciated. Thank you. __ __ __ __ __ Regards, Chris [spamblock used] |
#4
|
|||
|
|||
Panasonic TV Shutdown
Do you mean a cold solder joint and if so, where do I look for it?
|
#5
|
|||
|
|||
Panasonic TV Shutdown
Do you mean a cold solder joint and if so, where do I look for it?
|
#6
|
|||
|
|||
Panasonic TV Shutdown
Probably means a cracked solder connection. Look for it in the tv set.
Your description of the problem is way to vague to be any more specific. Anything from the system control, jungle ic, sweep, power supplies, can cause an intermittent shutdown. David news.bluefrog.biz wrote in message ... Do you mean a cold solder joint and if so, where do I look for it? |
#7
|
|||
|
|||
Panasonic TV Shutdown
Probably means a cracked solder connection. Look for it in the tv set.
Your description of the problem is way to vague to be any more specific. Anything from the system control, jungle ic, sweep, power supplies, can cause an intermittent shutdown. David news.bluefrog.biz wrote in message ... Do you mean a cold solder joint and if so, where do I look for it? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
ICs for Sale - Specials, obsolete and Memory | Electronics Repair | |||
TV Remote Control rubber pad(UR50CT1071) used in remote control for Panasonic TV Model TX-29GF10X | Electronics Repair | |||
AG 7350 and Sony Editor ? Qustion for Sony god's or Panasonic god's. | Electronics Repair |