DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   HP1650A logic analyser boot disk (https://www.diybanter.com/electronics-repair/40446-hp1650a-logic-analyser-boot-disk.html)

brian November 14th 03 08:02 PM

HP1650A logic analyser boot disk
 
Help!

I am looking for a boot disk/image for the Hewlett Packard 1650A logic
analyser.
From what I gather the disk format is not DOS, and there is little
(actually no) support available from Agilent.

It would be a pity to trash this analyser, just because there is no
operating system disk, as otherwise it is in good complete condition.

Thanks,
Brian.

Erie Patsellis November 15th 03 10:35 PM

HP1650A logic analyser boot disk
 
try the super secret agilent depository for all things electronic:
ftp.agilent.com/pub/callpub then do a little digging......(hint...
ftp://ftp.agilent.com/pub/callpub/EOS (End Of Support) )and hunt around,
I'm sure you'll find it....

erie


"brian" wrote in message
om...
Help!

I am looking for a boot disk/image for the Hewlett Packard 1650A logic
analyser.
From what I gather the disk format is not DOS, and there is little
(actually no) support available from Agilent.

It would be a pity to trash this analyser, just because there is no
operating system disk, as otherwise it is in good complete condition.

Thanks,
Brian.




brian November 16th 03 12:21 PM

HP1650A logic analyser boot disk
 
Thanks Ernie.

I found it! And lifutil, which is needed to make lif format disks on
a DOS system, is in the callpub directory. For reference, the system
version on the web is 1.11, and is for the HP 1650A and HP 1651A.

Brian.

"Erie Patsellis" wrote in message ...
try the super secret agilent depository for all things electronic:
ftp.agilent.com/pub/callpub then do a little digging......(hint...
ftp://ftp.agilent.com/pub/callpub/EOS (End Of Support) )and hunt around,
I'm sure you'll find it....

erie

I am looking for a boot disk/image for the Hewlett Packard 1650A logic
analyser.



All times are GMT +1. The time now is 06:13 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter