Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
BobD
 
Posts: n/a
Default CTC169AS Schematic

Hi,
Does anyone know if the schematic is available for this CTC169AS
chassis? I checked all the usual sources, but can't find this exact
one (AS suffix). All the references on the web for CTC169 refer to
different parts than what I have on this chassis (i.e. U4101 is U101
on my chassis). It's for a GE 31GT656 TV.
If anyone can provide this schematic, I would greatly appreciate it.

Regards,
Bob
  #2   Report Post  
David
 
Posts: n/a
Default CTC169AS Schematic

U101 on your chassis IS U4101. Thomson does not designate the general
circuit area first digit indicator. i.e. ALL the power supply parts are in
the 4000 series, etc.

I am sure you could buy the entire service manual set for the CTC169 chassis
for the series that you have from any Thomson authorized parts supplier.

David

BobD wrote in message
om...
Hi,
Does anyone know if the schematic is available for this CTC169AS
chassis? I checked all the usual sources, but can't find this exact
one (AS suffix). All the references on the web for CTC169 refer to
different parts than what I have on this chassis (i.e. U4101 is U101
on my chassis). It's for a GE 31GT656 TV.
If anyone can provide this schematic, I would greatly appreciate it.

Regards,
Bob



  #3   Report Post  
BobD
 
Posts: n/a
Default CTC169AS Schematic

Yes, but that would most likely cost more than a whole new 31" TV }:[


"David" wrote in message ...
U101 on your chassis IS U4101. Thomson does not designate the general
circuit area first digit indicator. i.e. ALL the power supply parts are in
the 4000 series, etc.

I am sure you could buy the entire service manual set for the CTC169 chassis
for the series that you have from any Thomson authorized parts supplier.

David

BobD wrote in message
om...
Hi,
Does anyone know if the schematic is available for this CTC169AS
chassis? I checked all the usual sources, but can't find this exact
one (AS suffix). All the references on the web for CTC169 refer to
different parts than what I have on this chassis (i.e. U4101 is U101
on my chassis). It's for a GE 31GT656 TV.
If anyone can provide this schematic, I would greatly appreciate it.

Regards,
Bob

  #4   Report Post  
David
 
Posts: n/a
Default CTC169AS Schematic

Correct me if I'm wrong, but I have yet to see a 31" tv set sell for $65 or
so, cost of one service manual chassis series set on old time paper.

Your other choice is copy the closest HW Sams from your local library for
the ctc169 chassis. There may be some differences, but anyone with some tv
repair experience should have no trouble identifying the differences.

David

BobD wrote in message
om...
Yes, but that would most likely cost more than a whole new 31" TV




"David" wrote in message

...
U101 on your chassis IS U4101. Thomson does not designate the general
circuit area first digit indicator. i.e. ALL the power supply parts are

in
the 4000 series, etc.

I am sure you could buy the entire service manual set for the CTC169

chassis
for the series that you have from any Thomson authorized parts supplier.

David

BobD wrote in message
om...
Hi,
Does anyone know if the schematic is available for this CTC169AS
chassis? I checked all the usual sources, but can't find this exact
one (AS suffix). All the references on the web for CTC169 refer to
different parts than what I have on this chassis (i.e. U4101 is U101
on my chassis). It's for a GE 31GT656 TV.
If anyone can provide this schematic, I would greatly appreciate it.

Regards,
Bob



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Schematic drawing and PCB design software iLLuSioN Electronics 8 November 19th 03 11:24 PM
NEC Acusync 50 Schematic David Ellingsworth Electronics Repair 0 October 5th 03 05:45 PM
Yamaha Blown Amp help nearly solved -see schematic - Wdyorchid Electronics Repair 1 August 22nd 03 09:03 AM
Viewsonic 1564 (15") monitor schematic wanted Don Fletcher Electronics Repair 2 August 7th 03 10:40 PM


All times are GMT +1. The time now is 08:19 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"