the red on this set will not converge left to right, and it is out of
line on both sides of the tv but is aligned top to bottom for about 2
feet in the middle. any help on where to start troubleshooting this or
what needs to be replaced would be greatly appreciated.

Thanks,
Chris

Suspect the convergence output devices, associated resistors, and supply
voltages. Occasionally a defect in the yoke but more likely the convergence
output area.
"Chris W." wrote in message
m...
the red on this set will not converge left to right, and it is out of
line on both sides of the tv but is aligned top to bottom for about 2
feet in the middle. any help on where to start troubleshooting this or
what needs to be replaced would be greatly appreciated.

Thanks,
Chris