SONY KV-27V40
 

Hello: I havent opened up this set as yet. It has a bright white raster and
no OSD and some retrace lines are visible. My friend said maybe the CPU or
Eeprom. Anybody have any ideas. I normally repair monitors so Im not sure
where to start. Thanks in advance
Mike

SONY KV-27V40
 

Weeeeeeeeeeeeell...........If this was a monitor what would cause this
symptom?

What are the B+ readings on the CRT cathodes?


--
==========================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
860-399-1861
860-664-3535 (fax)

========================
"If you push something hard enough it will fall over."
Fudd's First Law of Opposition - Sir Sidney Fudd


"mike" wrote in message
...
Hello: I havent opened up this set as yet. It has a bright white raster
and
no OSD and some retrace lines are visible. My friend said maybe the CPU or
Eeprom. Anybody have any ideas. I normally repair monitors so Im not sure
where to start. Thanks in advance
Mike

SONY KV-27V40
 

Check the power supply outputs, bias voltages to the CRT elements, screen
supply, and high voltage. It is also possible that the CRT has a screen
short.

--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
=========================================


"mike" wrote in message
...
Hello: I havent opened up this set as yet. It has a bright white raster and
no OSD and some retrace lines are visible. My friend said maybe the CPU or
Eeprom. Anybody have any ideas. I normally repair monitors so Im not sure
where to start. Thanks in advance
Mike