Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,sci.electronics.design
external usenet poster
 
Posts: 1
Default Looking for a tube only radio or radio kit

Looking for a tube only radio or radio kit
AM or FM or AM FM
More than standard broadcast range is desirable.
  #2   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,sci.electronics.design
external usenet poster
 
Posts: 1,375
Default Looking for a tube only radio or radio kit

On 14/06/16 20:35, Dan wrote:
Looking for a tube only radio or radio kit
AM or FM or AM FM
More than standard broadcast range is desirable.


Radiation hardened?

--
Adrian C
  #3   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 1,625
Default Looking for a tube only radio or radio kit

On Tuesday, June 14, 2016 at 3:35:20 PM UTC-4, Dan wrote:
Looking for a tube only radio or radio kit
AM or FM or AM FM
More than standard broadcast range is desirable.


Things useful to know:

a) where are you?
b) what is your budget?
c) are you in any way handy with tube stuff?
d) is portability an issue? Or will this be a mains-driven radio?
e) is vintage acceptable? Or do you want something "NEW"?

http://www.xtalman.com/kits.html

http://www.ebay.com/bhp/tube-radio-kit

The links take you to a mixed bag of radio kits - but keep in mind that most of them are toys and 'because they can' devices, not meant for serious (or reliable) listening. If you want that, I suggest you look for a decent existing radio within your budget that meets your needs. I keep several Zenith TransOceanic portable tube radios that receive well up into SW (but have no FM) that might fill the bill. They may be had for as little as US$40 in restorable condition, or as much as $1,500 for certain military models in excellent condition - and the range between.

If you want FM as well, you are in a difficult position - you may have to look at some of the very few tabletop tuner devices made by the likes of Zenith, Heath, and a number of Euro makers (Grundig, Telefunken and Philips come to mind as well as many lesser names) that also include FM. Some of these are tabletop radios with speakers, some even stereo. Others are merely multi-band tuners and require separate amplification and speakers. With the Euro radios, keep in mind that they never used one part where three-or-more would do better, so they are complicated, persnickety, and touchy. When they work well, they are excellent. And when they do not, they are a significant PITA to service, if even possible.

Pick your poison.

Peter Wieck
Melrose Park, PA
  #4   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,sci.electronics.design
external usenet poster
 
Posts: 105
Default Looking for a tube only radio or radio kit

On 6/14/2016 4:23 PM, Adrian Caspersz wrote:
On 14/06/16 20:35, Dan wrote:
Looking for a tube only radio or radio kit
AM or FM or AM FM
More than standard broadcast range is desirable.


Radiation hardened?

What does it matter. No transmitters will be on.
  #5   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 1,625
Default Looking for a tube only radio or radio kit

On Tuesday, June 14, 2016 at 5:35:42 PM UTC-4, Tom Biasi wrote:
On 6/14/2016 4:23 PM, Adrian Caspersz wrote:
On 14/06/16 20:35, Dan wrote:
Looking for a tube only radio or radio kit
AM or FM or AM FM
More than standard broadcast range is desirable.


Radiation hardened?

What does it matter. No transmitters will be on.


At least two will be - assuming our survival. And I know of dozens around the world that would survive - again, assuming they are far enough from Ground 0 that the 'wetware' survives.

Not that a great deal of good would come of it. It *IS* the thought that counts.

Peter Wieck
Melrose Park, PA


  #6   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,sci.electronics.design
external usenet poster
 
Posts: 1,384
Default Looking for a tube only radio or radio kit

Dan wrote:

Looking for a tube only radio or radio kit
AM or FM or AM FM
More than standard broadcast range is desirable.


The R-390 is a pretty nice receiver, all frequencies from near zero to 30
MHz. They are snapped up by hams and collectors, so they get quite
expensive. The R-392 has the same range, but is much simpler. It runs off
28 V DC, as both the filament and plate supply.

Jon
  #7   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,sci.electronics.design
external usenet poster
 
Posts: 639
Default Looking for a tube only radio or radio kit

On Tue, 14 Jun 2016 12:35:12 -0700, Dan wrote:

Looking for a tube only radio or radio kit
AM or FM or AM FM
More than standard broadcast range is desirable.


If you live near a city, there is probably an antique radio club in
it. The one in Baltimore has, iirc, monthly meetings and

RADIOACTIVITY 2016 and the TUBE COLLECTOR's ASSOCIATION Annual Meet
06/23/2016 | RadioActivity 2016
Location: Timonium, MD;
Type: ARRL Hamfest
Sponsor: Mid-Atlantic Antique Radio Club
Website: http://www.maarc.org
Swap Meet 8AM, Saturday
Learn More

At RadioActivity there are people selling restored radios with wooden
cabinets and simple tube radios from the 60's. I went one year and I
think I paid $10 for one, hoping it would get a DC station maybe 35
miles away. I can never tell in advance which radios will get it.
Brand name doesn't seem to matter.

RadioActivity 2016

HAMFEST/CONVENTION
06/23/2016

Start Date: 06/23/2016
End Date: 06/25/2016
Location: Holiday Inn
9615 Deereco Road
Timonium, MD
Website: http://www.maarc.org
Sponsor: Mid-Atlantic Antique Radio Club
Type: ARRL Hamfest
Talk-In: None
Public Contact: Bruce , KA3EIE
10 Route 99 Woodstock, MD 21163
Phone: 410-461-
Email:
  #8   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,sci.electronics.design
external usenet poster
 
Posts: 216
Default Looking for a tube only radio or radio kit

On 06/14/2016 03:35 PM, Dan wrote:
Looking for a tube only radio or radio kit
AM or FM or AM FM
More than standard broadcast range is desirable.


You can build a single-tube regenerative set that, if designed and
constructed carefully, will have much better performance over the AM and
AM shortwave bands than many commercially available superhets.
  #9   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,sci.electronics.design
external usenet poster
 
Posts: 1,405
Default Looking for a tube only radio or radio kit



"bitrex" wrote in message
...
On 06/14/2016 03:35 PM, Dan wrote:
Looking for a tube only radio or radio kit
AM or FM or AM FM
More than standard broadcast range is desirable.


You can build a single-tube regenerative set that, if designed and
constructed carefully, will have much better performance over the AM and
AM shortwave bands than many commercially available superhets.


Any kits available these days will probably be expensive.

There's plenty of simple circuits online and tubes can be salvaged from gear
that turns up at flea markets.

  #10   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,sci.electronics.design
external usenet poster
 
Posts: 62
Default Looking for a tube only radio or radio kit

Dan wrote:
Looking for a tube only radio or radio kit
AM or FM or AM FM
More than standard broadcast range is desirable.


I tried finding one that used transistors and no all-in-one radio chip,
and turned up nothing.





  #11   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,sci.electronics.design
external usenet poster
 
Posts: 4
Default Looking for a tube only radio or radio kit

On 6/19/2016 3:52 PM, Tom Del Rosso wrote:
Dan wrote:
Looking for a tube only radio or radio kit
AM or FM or AM FM
More than standard broadcast range is desirable.


I tried finding one that used transistors and no all-in-one radio chip,
and turned up nothing.



Ebay has some AM transistor radio kits, i.e., unbuilt
http://ebay.to/1UiPPFA

as well as a variety of tube radios (AM, AM-FM. & AM-FM-SW), all built

and some AM tube kits http://ebay.to/1UiOXAN

one of which - a 7 tube AM radio - for $9 features:

two in the discharge standard circuit;
Modulated at 465KHz
Plastic shell for the new material, and never go back to feeding.
Each test port circuit Ic levels.
Schematics, assembly drawings, and the other parts list, technical
documents are complete.

Despite the description, it uses transistors, not tubes.


  #12   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,sci.electronics.design
external usenet poster
 
Posts: 4,228
Default Looking for a tube only radio or radio kit

In article ,
says...



Ebay has some AM transistor radio kits, i.e., unbuilt
http://ebay.to/1UiPPFA

as well as a variety of tube radios (AM, AM-FM. & AM-FM-SW), all built

and some AM tube kits http://ebay.to/1UiOXAN

one of which - a 7 tube AM radio - for $9 features:

two in the discharge standard circuit;
Modulated at 465KHz
Plastic shell for the new material, and never go back to feeding.
Each test port circuit Ic levels.
Schematics, assembly drawings, and the other parts list, technical
documents are complete.

Despite the description, it uses transistors, not tubes.


Probably something lost in the translation. Just as in England instead
of tubes they would be called valves.

Could be the instructions are also in Chineese.



  #13   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,sci.electronics.design
external usenet poster
 
Posts: 47
Default Looking for a tube only radio or radio kit

On 6/19/2016 8:35 PM, Ralph Mowery wrote:
In article ,
says...



Ebay has some AM transistor radio kits, i.e., unbuilt
http://ebay.to/1UiPPFA

as well as a variety of tube radios (AM, AM-FM. & AM-FM-SW), all built

and some AM tube kits http://ebay.to/1UiOXAN

one of which - a 7 tube AM radio - for $9 features:

two in the discharge standard circuit;
Modulated at 465KHz
Plastic shell for the new material, and never go back to feeding.
Each test port circuit Ic levels.
Schematics, assembly drawings, and the other parts list, technical
documents are complete.

Despite the description, it uses transistors, not tubes.


Probably something lost in the translation. Just as in England instead
of tubes they would be called valves.

Could be the instructions are also in Chineese.


Parts list and notes on the schematic are in Chinese (though parts
within the schematic are Roman, C1, R5, etc. Transistors are labeled
V1, V2, etc.)

Since the plastic case never needs feeding there is some slight
likelihood of a translation problem. http://ebay.to/28J5Lw7

  #14   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,sci.electronics.design
external usenet poster
 
Posts: 12
Default Looking for a tube only radio or radio kit

On 15-Jun-16 5:35 AM, Tom Biasi wrote:
On 6/14/2016 4:23 PM, Adrian Caspersz wrote:
On 14/06/16 20:35, Dan wrote:
Looking for a tube only radio or radio kit
AM or FM or AM FM
More than standard broadcast range is desirable.


Radiation hardened?

What does it matter. No transmitters will be on.



You got a laugh out of me.
  #15   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,sci.electronics.design
external usenet poster
 
Posts: 639
Default Looking for a tube only radio or radio kit

On Mon, 20 Jun 2016 07:16:28 -0700, Bennett
wrote:

On 6/19/2016 8:35 PM, Ralph Mowery wrote:
In article ,
says...



Ebay has some AM transistor radio kits, i.e., unbuilt
http://ebay.to/1UiPPFA

as well as a variety of tube radios (AM, AM-FM. & AM-FM-SW), all built

and some AM tube kits http://ebay.to/1UiOXAN

one of which - a 7 tube AM radio - for $9 features:

two in the discharge standard circuit;
Modulated at 465KHz
Plastic shell for the new material, and never go back to feeding.
Each test port circuit Ic levels.
Schematics, assembly drawings, and the other parts list, technical
documents are complete.

Despite the description, it uses transistors, not tubes.


Probably something lost in the translation. Just as in England instead
of tubes they would be called valves.

Could be the instructions are also in Chineese.


Parts list and notes on the schematic are in Chinese (though parts
within the schematic are Roman, C1, R5, etc. Transistors are labeled
V1, V2, etc.)

Since the plastic case never needs feeding there is some slight
likelihood of a translation problem. http://ebay.to/28J5Lw7


I noticed that, but that's good. It means I can go out of town
without worrying who is feeding my case.


  #16   Report Post  
Posted to sci.electronics.basics,sci.electronics.repair,sci.electronics.design
external usenet poster
 
Posts: 639
Default Looking for a tube only radio or radio kit

On Sun, 19 Jun 2016 17:44:59 -0700, Bennett Price
wrote:

On 6/19/2016 3:52 PM, Tom Del Rosso wrote:
Dan wrote:
Looking for a tube only radio or radio kit
AM or FM or AM FM
More than standard broadcast range is desirable.


I tried finding one that used transistors and no all-in-one radio chip,
and turned up nothing.



Ebay has some AM transistor radio kits, i.e., unbuilt
http://ebay.to/1UiPPFA

as well as a variety of tube radios (AM, AM-FM. & AM-FM-SW), all built

and some AM tube kits http://ebay.to/1UiOXAN

one of which - a 7 tube AM radio - for $9 features:

two in the discharge standard circuit;
Modulated at 465KHz
Plastic shell for the new material, and never go back to feeding.
Each test port circuit Ic levels.
Schematics, assembly drawings, and the other parts list, technical
documents are complete.

Despite the description, it uses transistors, not tubes.

It also says
Power: 3V (5 batteries)

That seems interesting.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adding an FM radio to a valve/tube car radio N_Cook Electronics Repair 12 July 16th 08 11:46 AM
Ekco CR280 valve/tube car radio N_Cook Electronics Repair 8 June 16th 08 02:25 AM
Valve/tube car radio AM to FM conversion ideas? N_Cook Electronics Repair 8 June 8th 08 10:48 AM
Repairing an old Grundig tube radio grupt Electronics Repair 6 January 25th 06 12:52 PM
Magnavox Tube Radio Has Too Much Bass!! AshTray700 Electronics Repair 5 December 19th 04 12:32 AM


All times are GMT +1. The time now is 08:13 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"