Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Martin & Debbie Ghioto
 
Posts: n/a
Default Palm m105 Memory Backup Capacitor

I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source for
these caps or an equivalent I don't know about? Thank you.


  #2   Report Post  
Wild Bill
 
Posts: n/a
Default Palm m105 Memory Backup Capacitor

It depends which country you're in.. most larger U.S. parts distributors
sell these memory (back-up) capacitors.

You might try searching electronic parts (or components) suppliers,
distributors dealers.

MCM, Digi-Key, Mouser and many more probably stock these caps

WB
..............

"Martin & Debbie Ghioto" wrote in message
. net...
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier

for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source

for
these caps or an equivalent I don't know about? Thank you.




  #3   Report Post  
Wild Bill
 
Posts: n/a
Default Palm m105 Memory Backup Capacitor

It depends which country you're in.. most larger U.S. parts distributors
sell these memory (back-up) capacitors.

You might try searching electronic parts (or components) suppliers,
distributors dealers.

MCM, Digi-Key, Mouser and many more probably stock these caps

WB
..............

"Martin & Debbie Ghioto" wrote in message
. net...
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier

for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source

for
these caps or an equivalent I don't know about? Thank you.




  #4   Report Post  
Martin & Debbie Ghioto
 
Posts: n/a
Default Palm m105 Memory Backup Capacitor

You would think that here in the States they would. Mouser has them listed
on their website, but I would have to get 1500 of them. Nothing at Digi-Key.
I finally ordered the Panasonic caps from Newark, but it is going to take 3
weeks. They have to get them from their sister company in England!


  #5   Report Post  
Martin & Debbie Ghioto
 
Posts: n/a
Default Palm m105 Memory Backup Capacitor

You would think that here in the States they would. Mouser has them listed
on their website, but I would have to get 1500 of them. Nothing at Digi-Key.
I finally ordered the Panasonic caps from Newark, but it is going to take 3
weeks. They have to get them from their sister company in England!




  #6   Report Post  
Christian B.
 
Posts: n/a
Default Palm m105 Memory Backup Capacitor

I'm also searchin for 2 caps "memory back-up" for a M125,..
BUT i dont know witch part number it is.

Where did u find yours? (part number) and do you know if it is the same part
for both M105 and M125 ???



"Martin & Debbie Ghioto" wrote in message
. net...
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier

for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source

for
these caps or an equivalent I don't know about? Thank you.




  #7   Report Post  
Christian B.
 
Posts: n/a
Default Palm m105 Memory Backup Capacitor

I'm also searchin for 2 caps "memory back-up" for a M125,..
BUT i dont know witch part number it is.

Where did u find yours? (part number) and do you know if it is the same part
for both M105 and M125 ???



"Martin & Debbie Ghioto" wrote in message
. net...
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier

for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source

for
these caps or an equivalent I don't know about? Thank you.




  #8   Report Post  
Christian B.
 
Posts: n/a
Default Palm m105 Memory Backup Capacitor

I lost your original post,..can you post part number again please.

I need these caps too, for a M125.




"Wild Bill" wrote in message
...
It depends which country you're in.. most larger U.S. parts distributors
sell these memory (back-up) capacitors.

You might try searching electronic parts (or components) suppliers,
distributors dealers.

MCM, Digi-Key, Mouser and many more probably stock these caps

WB
.............

"Martin & Debbie Ghioto" wrote in message
. net...
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier

for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also

work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source

for
these caps or an equivalent I don't know about? Thank you.






  #9   Report Post  
Christian B.
 
Posts: n/a
Default Palm m105 Memory Backup Capacitor

I lost your original post,..can you post part number again please.

I need these caps too, for a M125.




"Wild Bill" wrote in message
...
It depends which country you're in.. most larger U.S. parts distributors
sell these memory (back-up) capacitors.

You might try searching electronic parts (or components) suppliers,
distributors dealers.

MCM, Digi-Key, Mouser and many more probably stock these caps

WB
.............

"Martin & Debbie Ghioto" wrote in message
. net...
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier

for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also

work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source

for
these caps or an equivalent I don't know about? Thank you.






  #10   Report Post  
Christian B.
 
Posts: n/a
Default Palm m105 Memory Backup Capacitor

I've to change caps in my M125 too.
Where do you get parts number for your M105?
Do you think it is the same as M125?

I tried to get part number from Palm but,...all they can say is "DO NOT OPEN
IT!!!"

Thanks
Chris

"Martin & Debbie Ghioto" wrote in message
. net...
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier

for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source

for
these caps or an equivalent I don't know about? Thank you.






  #11   Report Post  
Christian B.
 
Posts: n/a
Default Palm m105 Memory Backup Capacitor

I've to change caps in my M125 too.
Where do you get parts number for your M105?
Do you think it is the same as M125?

I tried to get part number from Palm but,...all they can say is "DO NOT OPEN
IT!!!"

Thanks
Chris

"Martin & Debbie Ghioto" wrote in message
. net...
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier

for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source

for
these caps or an equivalent I don't know about? Thank you.




  #12   Report Post  
jakdedert
 
Posts: n/a
Default Palm m105 Memory Backup Capacitor

Did you try Gethightech?

jak

"Christian B." wrote in message
...
I've to change caps in my M125 too.
Where do you get parts number for your M105?
Do you think it is the same as M125?

I tried to get part number from Palm but,...all they can say is "DO NOT

OPEN
IT!!!"

Thanks
Chris

"Martin & Debbie Ghioto" wrote in message
. net...
I am looking for a source for this cap, which is an Elna DSK-3R3H224-H .
I've done a Google search and have had no success in finding a supplier

for
a small quantity (5-10 pieces). The Panasonic EECEN0F204 would also

work.
These are surface mount caps rated at 3.3V, 0.22F. Anybody know a source

for
these caps or an equivalent I don't know about? Thank you.






Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GE MPD M-PD radio repair lithium memory backup battery locationproblem solution Mike Berger Electronics Repair 0 July 28th 03 05:28 PM


All times are GMT +1. The time now is 04:20 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"