DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Dead Electrical (https://www.diybanter.com/electronics-repair/392967-dead-electrical.html)

Rheilly Phoull[_2_] April 9th 16 01:05 AM

Dead Electrical
 
On 6/04/2016 10:39 AM, wrote:
"So when is grease on the terminals bad ??"


Before it is connected. After it is connected grease helps keep the elements away but you don't want it between the mating surfaces.

Hmmm, I wonder how all those switches immersed in oil ever work ??

[email protected] April 9th 16 01:14 AM

Dead Electrical
 
"Hmmm, I wonder how all those switches immersed in oil ever work ?? "

They are designed for it. Line of contact where the spring pressure rests and forces metal to metal contact. This is not the same thing. this is a round cylinder with a clamp on it that is supposed to make connection good for a couple hundred amps. When GM came out with the side post battery, there could be grease in there because they had raised parts on the connectors that actually dug into the lead. Really, side post batteries were a disaster, a piece of ****. I knew alot of people who converted them to the normal top post.

Thing is, the terminals that connect to the batter are smooth. If they put teeth on them that would be different. then you could grease the **** out of them. bnut they don't do that and actually they have good reason.

Bottom line, clean everything best you can, make the connection and tighten it, and then apply the protective grease of your choice.

Take my word for it, I have been at this for a while.

whit3rd April 9th 16 08:11 AM

Dead Electrical
 
On Friday, April 8, 2016 at 5:03:01 PM UTC-7, Rheilly Phoull wrote:
On 6/04/2016 10:39 AM, wrote:
"So when is grease on the terminals bad ??"


Before it is connected. After it is connected grease helps keep the elements away but you don't want it between the mating surfaces.


Hmmm, I wonder how all those switches immersed in oil ever work ??


There's lots of kinds of grease. Some has particles that help prevent wear, but also prevent
metal-metal contact. Some has conductive particles, that might cause unintended conduction.
Some has semiconducting particles, especially to enhance electrical contact. And some,
like petroleum jelly or silicone grease, has no capability to hold metal parts apart (but is
good against corrosion and/or condensing moisture).


All times are GMT +1. The time now is 03:59 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter