I see your vocabulary has not expanded.....retard and dip****.....So
impressive!

"DarkMatter" wrote in message
...
On Tue, 07 Oct 2003 17:38:50 GMT, "Ross Mac"
Gave us:

Dark Manure runs all over the newsgroups posting obnoxious messages then
wants to cite protocol to us all.


Show me the rfc where being obnoxious is disallowed, you top posting
usenet twit!

That's what I thought... You cannot.

However plenty of them DO cite top posting as being one of the most
inconsiderate forms of ignoring usenet protocols. Do you read ass
backwards, dip****?

I see your vocabulary has not expanded.....retard and dip****.....So
impressive!

"DarkMatter" wrote in message
...
On Tue, 07 Oct 2003 17:38:50 GMT, "Ross Mac"
Gave us:

Dark Manure runs all over the newsgroups posting obnoxious messages then
wants to cite protocol to us all.


Show me the rfc where being obnoxious is disallowed, you top posting
usenet twit!

That's what I thought... You cannot.

However plenty of them DO cite top posting as being one of the most
inconsiderate forms of ignoring usenet protocols. Do you read ass
backwards, dip****?

So, Dark Manure....you must be the master of the Usenet...I will make sure
in the future to follow all your suggestions and rules....yeah right....kiss
my %$# pillow biter!!
Get an efffing life and hey...your slimy hide is all over the news
groups....and what a fool you have made of yourself...It appears your handle
is Tard Boy....
When you reach the rip old age of 14 perhaps you will gain a bit of
wisdom......get a life loser!

"DarkMatter" wrote in message
...
On Tue, 07 Oct 2003 17:38:50 GMT, "Ross Mac"
Gave us:

Dark Manure runs all over the newsgroups posting obnoxious messages then
wants to cite protocol to us all.


Show me the rfc where being obnoxious is disallowed, you top posting
usenet twit!

That's what I thought... You cannot.

However plenty of them DO cite top posting as being one of the most
inconsiderate forms of ignoring usenet protocols. Do you read ass
backwards, dip****?

So, Dark Manure....you must be the master of the Usenet...I will make sure
in the future to follow all your suggestions and rules....yeah right....kiss
my %$# pillow biter!!
Get an efffing life and hey...your slimy hide is all over the news
groups....and what a fool you have made of yourself...It appears your handle
is Tard Boy....
When you reach the rip old age of 14 perhaps you will gain a bit of
wisdom......get a life loser!

"DarkMatter" wrote in message
...
On Tue, 07 Oct 2003 17:38:50 GMT, "Ross Mac"
Gave us:

Dark Manure runs all over the newsgroups posting obnoxious messages then
wants to cite protocol to us all.


Show me the rfc where being obnoxious is disallowed, you top posting
usenet twit!

That's what I thought... You cannot.

However plenty of them DO cite top posting as being one of the most
inconsiderate forms of ignoring usenet protocols. Do you read ass
backwards, dip****?

Here we go again.....Tard Boy claims to be 43....yeah right...and his
vocabulary...yup...the same....retard and dip****...and his reference to
school friends....well like I said...Tard Boy is in school.....hope the
little ******* learns something!
"DarkMatter" wrote in message
...
On Tue, 07 Oct 2003 17:33:07 GMT, "Ross Mac"
Gave us:

Great...another 12 year old diatribe from Tard boy!

You're an idiot. YOU are the only **** here that is of an adult
age, but has yet to actually BE an adult.

I am 43. I am also an order of magnitude smarter than your lame
ass. I have done more in the last week to make the world a better
place than your lame, wussy boy ass will accomplish in your entire
pathetic, petty life, little girl.

Such genious!

Try spelling it correctly at least, next time, retard.

Do you and your little school friends sit around and compose
this lame crap!

My school friends are college level engineers and such, and we laugh
our asses off at how retarded Usenet twits like you are.

Go back to spankin the monkey on the alt.binaries....

Again, stop projecting your little problems onto others.

The binary groups I frequent are software groups, retard boy.

At least then, your "little paws" will be busy!

I do more in one day than your lame ass will accomplish in your
entire pathetic life, boy. The products I engineer save lives.

Your lame, E-1 grade ass will NEVER measure up, dip****.

Here we go again.....Tard Boy claims to be 43....yeah right...and his
vocabulary...yup...the same....retard and dip****...and his reference to
school friends....well like I said...Tard Boy is in school.....hope the
little ******* learns something!
"DarkMatter" wrote in message
...
On Tue, 07 Oct 2003 17:33:07 GMT, "Ross Mac"
Gave us:

Great...another 12 year old diatribe from Tard boy!

You're an idiot. YOU are the only **** here that is of an adult
age, but has yet to actually BE an adult.

I am 43. I am also an order of magnitude smarter than your lame
ass. I have done more in the last week to make the world a better
place than your lame, wussy boy ass will accomplish in your entire
pathetic, petty life, little girl.

Such genious!

Try spelling it correctly at least, next time, retard.

Do you and your little school friends sit around and compose
this lame crap!

My school friends are college level engineers and such, and we laugh
our asses off at how retarded Usenet twits like you are.

Go back to spankin the monkey on the alt.binaries....

Again, stop projecting your little problems onto others.

The binary groups I frequent are software groups, retard boy.

At least then, your "little paws" will be busy!

I do more in one day than your lame ass will accomplish in your
entire pathetic life, boy. The products I engineer save lives.

Your lame, E-1 grade ass will NEVER measure up, dip****.

You really have a hard on for top posters....why, I cannot guess....I will
make sure to always reply to your lame ass ON THE TOP.......


"DarkMatter" wrote in message
...
On Wed, 08 Oct 2003 02:37:14 GMT, "Ross Mac"
Gave us:

I see your vocabulary has not expanded.....retard and dip****.....So
impressive!


Interesting that your LAME ass still ignored the actual subject of
the post. The FACT that top posting is lame, and only ditzes top post.

Particularly after they were informed that it is unacceptable. You
epitomize usenet trolldom.


"DarkMatter" wrote in
message
.. .
On Tue, 07 Oct 2003 17:38:50 GMT, "Ross Mac"
Gave us:

Dark Manure runs all over the newsgroups posting obnoxious messages
then
wants to cite protocol to us all.


Show me the rfc where being obnoxious is disallowed, you top posting
usenet twit!

That's what I thought... You cannot.

However plenty of them DO cite top posting as being one of the most
inconsiderate forms of ignoring usenet protocols. Do you read ass
backwards, dip****?

You really have a hard on for top posters....why, I cannot guess....I will
make sure to always reply to your lame ass ON THE TOP.......


"DarkMatter" wrote in message
...
On Wed, 08 Oct 2003 02:37:14 GMT, "Ross Mac"
Gave us:

I see your vocabulary has not expanded.....retard and dip****.....So
impressive!


Interesting that your LAME ass still ignored the actual subject of
the post. The FACT that top posting is lame, and only ditzes top post.

Particularly after they were informed that it is unacceptable. You
epitomize usenet trolldom.


"DarkMatter" wrote in
message
.. .
On Tue, 07 Oct 2003 17:38:50 GMT, "Ross Mac"
Gave us:

Dark Manure runs all over the newsgroups posting obnoxious messages
then
wants to cite protocol to us all.


Show me the rfc where being obnoxious is disallowed, you top posting
usenet twit!

That's what I thought... You cannot.

However plenty of them DO cite top posting as being one of the most
inconsiderate forms of ignoring usenet protocols. Do you read ass
backwards, dip****?

43....huh....could fool me.....and an engineer...hmmmm...what field???......
Ya wonder bout me??? I am retired.....I made my fortune a few years back in
electronics.....
"DarkMatter" wrote in message
...
On Wed, 08 Oct 2003 02:49:59 GMT, "Ross Mac"
Gave us:

Here we go again.....Tard Boy claims to be 43....yeah right...and his
vocabulary...yup...the same....retard and dip****...and his reference to
school friends....well like I said...Tard Boy is in school.....hope the
little ******* learns something!

I am 43. I am an engineer, ya ****in' 'tard.

Like I said... I have done more in the past week to make the world
a better place for mankind, than your lame, wussy boy ass will ever do
in your ENTIRE lame, pathetic cringing little milksop life.

You totally clueless *******.

43....huh....could fool me.....and an engineer...hmmmm...what field???......
Ya wonder bout me??? I am retired.....I made my fortune a few years back in
electronics.....
"DarkMatter" wrote in message
...
On Wed, 08 Oct 2003 02:49:59 GMT, "Ross Mac"
Gave us:

Here we go again.....Tard Boy claims to be 43....yeah right...and his
vocabulary...yup...the same....retard and dip****...and his reference to
school friends....well like I said...Tard Boy is in school.....hope the
little ******* learns something!

I am 43. I am an engineer, ya ****in' 'tard.

Like I said... I have done more in the past week to make the world
a better place for mankind, than your lame, wussy boy ass will ever do
in your ENTIRE lame, pathetic cringing little milksop life.

You totally clueless *******.

Get your rocks off kid.....hope it feels good!

"DarkMatter" wrote in message
...
On Wed, 08 Oct 2003 05:13:38 GMT, "Ross Mac"
Gave us:

You really have a hard on for top posters....why, I cannot guess....I
will
make sure to always reply to your lame ass ON THE TOP.......

Count yourself among the trolls, the retarded... the filtered.

Be... as lame as you can be. Oooops... too late for you.

Get your rocks off kid.....hope it feels good!

"DarkMatter" wrote in message
...
On Wed, 08 Oct 2003 05:13:38 GMT, "Ross Mac"
Gave us:

You really have a hard on for top posters....why, I cannot guess....I
will
make sure to always reply to your lame ass ON THE TOP.......

Count yourself among the trolls, the retarded... the filtered.

Be... as lame as you can be. Oooops... too late for you.

You claim to be a 43 year old engineer....Ok....I will give you the benefit
of the doubt...Let's say I have a 28 volt DC motor and want it to control a
mechanism to a tenth of a mil....what type of controller and encoding system
would you use?.....Any close answer will do.....
You won't be able to find the answer to this one on google!......show me the
intelligence!!!.........Your good bud.....Ross
"DarkMatter" wrote in message
...
On Wed, 08 Oct 2003 05:13:38 GMT, "Ross Mac"
Gave us:

You really have a hard on for top posters....why, I cannot guess....I
will
make sure to always reply to your lame ass ON THE TOP.......

Count yourself among the trolls, the retarded... the filtered.

Be... as lame as you can be. Oooops... too late for you.

You claim to be a 43 year old engineer....Ok....I will give you the benefit
of the doubt...Let's say I have a 28 volt DC motor and want it to control a
mechanism to a tenth of a mil....what type of controller and encoding system
would you use?.....Any close answer will do.....
You won't be able to find the answer to this one on google!......show me the
intelligence!!!.........Your good bud.....Ross
"DarkMatter" wrote in message
...
On Wed, 08 Oct 2003 05:13:38 GMT, "Ross Mac"
Gave us:

You really have a hard on for top posters....why, I cannot guess....I
will
make sure to always reply to your lame ass ON THE TOP.......

Count yourself among the trolls, the retarded... the filtered.

Be... as lame as you can be. Oooops... too late for you.

I think your comment on "baby bull****" explains you quite well. Do you
behave this way at work? And the answer to the question I posed is a
non-answer. It is a description of an entirely different device. I guess you
read spec sheets for a living. Somehow I don't think you would want to
control a 28vdc motor with an 800volt amp. The question I posed to you was
simple. I tried to keep it that way as to not confuse your simple mind. I
didn't think we had to design the space shuttle! Nice try kid. You tout
yourself as an adult professional and all I see here is a childish mind.
And hey, what is this bizarre problem you have with a top post. You have to
have some serious sickness within yourself to continue on this quest.
Perhaps your handle should really be "Don Quixote" since you like to battle
windmills. Why don't you start and moderate your own newsgroup. Should we
call it alt.darkmanure.pinhead.troll ?
Get a life skippy.....Ross

"DarkMatter" wrote in message
...
On Thu, 09 Oct 2003 02:33:11 GMT, "Ross Mac"
Gave us:

You claim to be a 43 year old engineer....Ok....I will give you the
benefit
of the doubt...Let's say I have a 28 volt DC motor and want it to control
a
mechanism to a tenth of a mil....what type of controller and encoding
system
would you use?.....Any close answer will do.....
You won't be able to find the answer to this one on google!......show me
the
intelligence!!!.........Your good bud.....Ross


You're a retard.

I manufacture Piezo motors and control systems that operate in the
100 to 1000 micron range. The amplifier that excites them are 1.5kW,
800V
EXTREMELY low distortion amplifiers. The piezo stacks are hundreds of
wafers each, and an LVDT is used to determine position in real time,
as the lathe head it gets used on can cut optical quality surfaces on
the first pass. It can also cut a square peg from a round pin on a
spinning lathe. Use your dim wit to figure that one out.

Your little tenth of a mil baby bull**** is child's play by
comparison. Laser etched optical rules, and magnetic types are
nowhere near the resolve of these machines. They even detect and
remove backlash artifacts from the lathe head, and lathe machinery.

Gotcha! Not that *that* was any chore.

Learn how to refrain from top posting, retard boy. It is as simple
as that.

I think your comment on "baby bull****" explains you quite well. Do you
behave this way at work? And the answer to the question I posed is a
non-answer. It is a description of an entirely different device. I guess you
read spec sheets for a living. Somehow I don't think you would want to
control a 28vdc motor with an 800volt amp. The question I posed to you was
simple. I tried to keep it that way as to not confuse your simple mind. I
didn't think we had to design the space shuttle! Nice try kid. You tout
yourself as an adult professional and all I see here is a childish mind.
And hey, what is this bizarre problem you have with a top post. You have to
have some serious sickness within yourself to continue on this quest.
Perhaps your handle should really be "Don Quixote" since you like to battle
windmills. Why don't you start and moderate your own newsgroup. Should we
call it alt.darkmanure.pinhead.troll ?
Get a life skippy.....Ross

"DarkMatter" wrote in message
...
On Thu, 09 Oct 2003 02:33:11 GMT, "Ross Mac"
Gave us:

You claim to be a 43 year old engineer....Ok....I will give you the
benefit
of the doubt...Let's say I have a 28 volt DC motor and want it to control
a
mechanism to a tenth of a mil....what type of controller and encoding
system
would you use?.....Any close answer will do.....
You won't be able to find the answer to this one on google!......show me
the
intelligence!!!.........Your good bud.....Ross


You're a retard.

I manufacture Piezo motors and control systems that operate in the
100 to 1000 micron range. The amplifier that excites them are 1.5kW,
800V
EXTREMELY low distortion amplifiers. The piezo stacks are hundreds of
wafers each, and an LVDT is used to determine position in real time,
as the lathe head it gets used on can cut optical quality surfaces on
the first pass. It can also cut a square peg from a round pin on a
spinning lathe. Use your dim wit to figure that one out.

Your little tenth of a mil baby bull**** is child's play by
comparison. Laser etched optical rules, and magnetic types are
nowhere near the resolve of these machines. They even detect and
remove backlash artifacts from the lathe head, and lathe machinery.

Gotcha! Not that *that* was any chore.

Learn how to refrain from top posting, retard boy. It is as simple
as that.

"DarkMatter"
I manufacture Piezo motors and control systems that operate in the
100 to 1000 micron range. The amplifier that excites them are 1.5kW,
800V
EXTREMELY low distortion amplifiers. The piezo stacks are hundreds of
wafers each, and an LVDT is used to determine position in real time,
as the lathe head it gets used on can cut optical quality surfaces on
the first pass. It can also cut a square peg from a round pin on a
spinning lathe. Use your dim wit to figure that one out.

Your little tenth of a mil baby bull**** is child's play by
comparison. Laser etched optical rules, and magnetic types are
nowhere near the resolve of these machines. They even detect and
remove backlash artifacts from the lathe head, and lathe machinery.

Gotcha! Not that *that* was any chore.

Learn how to refrain from top posting, retard boy. It is as simple
as that.

I think we have a winner.

Now THAT was an interesting post.


Martin
--
M.A.Poyser Tel.: 07967 110890
Manchester, U.K. http://www.fleetie.demon.co.uk

"DarkMatter"
I manufacture Piezo motors and control systems that operate in the
100 to 1000 micron range. The amplifier that excites them are 1.5kW,
800V
EXTREMELY low distortion amplifiers. The piezo stacks are hundreds of
wafers each, and an LVDT is used to determine position in real time,
as the lathe head it gets used on can cut optical quality surfaces on
the first pass. It can also cut a square peg from a round pin on a
spinning lathe. Use your dim wit to figure that one out.

Your little tenth of a mil baby bull**** is child's play by
comparison. Laser etched optical rules, and magnetic types are
nowhere near the resolve of these machines. They even detect and
remove backlash artifacts from the lathe head, and lathe machinery.

Gotcha! Not that *that* was any chore.

Learn how to refrain from top posting, retard boy. It is as simple
as that.

I think we have a winner.

Now THAT was an interesting post.


Martin
--
M.A.Poyser Tel.: 07967 110890
Manchester, U.K. http://www.fleetie.demon.co.uk

Look closely at the reply....he never answers the question he just starts up
his diatribe again!

"Fleetie" wrote in message
...

"DarkMatter"
I manufacture Piezo motors and control systems that operate in the
100 to 1000 micron range. The amplifier that excites them are 1.5kW,
800V
EXTREMELY low distortion amplifiers. The piezo stacks are hundreds of
wafers each, and an LVDT is used to determine position in real time,
as the lathe head it gets used on can cut optical quality surfaces on
the first pass. It can also cut a square peg from a round pin on a
spinning lathe. Use your dim wit to figure that one out.

Your little tenth of a mil baby bull**** is child's play by
comparison. Laser etched optical rules, and magnetic types are
nowhere near the resolve of these machines. They even detect and
remove backlash artifacts from the lathe head, and lathe machinery.

Gotcha! Not that *that* was any chore.

Learn how to refrain from top posting, retard boy. It is as simple
as that.

I think we have a winner.

Now THAT was an interesting post.


Martin
--
M.A.Poyser Tel.: 07967
110890
Manchester, U.K.
http://www.fleetie.demon.co.uk

Look closely at the reply....he never answers the question he just starts up
his diatribe again!

"Fleetie" wrote in message
...

"DarkMatter"
I manufacture Piezo motors and control systems that operate in the
100 to 1000 micron range. The amplifier that excites them are 1.5kW,
800V
EXTREMELY low distortion amplifiers. The piezo stacks are hundreds of
wafers each, and an LVDT is used to determine position in real time,
as the lathe head it gets used on can cut optical quality surfaces on
the first pass. It can also cut a square peg from a round pin on a
spinning lathe. Use your dim wit to figure that one out.

Your little tenth of a mil baby bull**** is child's play by
comparison. Laser etched optical rules, and magnetic types are
nowhere near the resolve of these machines. They even detect and
remove backlash artifacts from the lathe head, and lathe machinery.

Gotcha! Not that *that* was any chore.

Learn how to refrain from top posting, retard boy. It is as simple
as that.

I think we have a winner.

Now THAT was an interesting post.


Martin
--
M.A.Poyser Tel.: 07967
110890
Manchester, U.K.
http://www.fleetie.demon.co.uk

What made you think I was old....retired does not = old. It means I already
made my bucks and am enjoying a great lifestyle.......You are, however, are
in the rat race.....with all your genious!.If you are such a genious why do
you have to work?..A lot of rhetoric here but no answer to the
question.....if you are so smart...answer it......I know..you never
will...you will just keep posting your usual "retard" and "dip****" remarks
.....enjoy it ....I am sure it gives you great satisfaction!
"DarkMatter" wrote in message
...
On Thu, 09 Oct 2003 20:47:36 GMT, "Ross Mac"
Gave us:

Look closely at the reply....he never answers the question he just starts
up
his diatribe again!


I didn't answer your question. I did, however, put your piddly
little control technology to shame, and the goal you were after was to
query my electronic abilities. It appears that it is YOU that
attempts to circumnavigate the facts at every turn. That is true from
usenet posting protocol perspectives, all the way through the fact
that I did give an answer that should have cleared up your pussy wussy
doubts.

Face it, old man... you cannot stand the fact that you post like a
little mosh pit punk on usenet.

Got clue?

What made you think I was old....retired does not = old. It means I already
made my bucks and am enjoying a great lifestyle.......You are, however, are
in the rat race.....with all your genious!.If you are such a genious why do
you have to work?..A lot of rhetoric here but no answer to the
question.....if you are so smart...answer it......I know..you never
will...you will just keep posting your usual "retard" and "dip****" remarks
.....enjoy it ....I am sure it gives you great satisfaction!
"DarkMatter" wrote in message
...
On Thu, 09 Oct 2003 20:47:36 GMT, "Ross Mac"
Gave us:

Look closely at the reply....he never answers the question he just starts
up
his diatribe again!


I didn't answer your question. I did, however, put your piddly
little control technology to shame, and the goal you were after was to
query my electronic abilities. It appears that it is YOU that
attempts to circumnavigate the facts at every turn. That is true from
usenet posting protocol perspectives, all the way through the fact
that I did give an answer that should have cleared up your pussy wussy
doubts.

Face it, old man... you cannot stand the fact that you post like a
little mosh pit punk on usenet.

Got clue?

How bout an answer genious!....It will never happen....
Call your teacher...maybe he can answer the question....the more days it
goes the more it appears you do not know your craft...

"DarkMatter" wrote in message
...
On Thu, 09 Oct 2003 20:47:36 GMT, "Ross Mac"
Gave us:

Look closely at the reply....he never answers the question he just starts
up
his diatribe again!


I didn't answer your question. I did, however, put your piddly
little control technology to shame, and the goal you were after was to
query my electronic abilities. It appears that it is YOU that
attempts to circumnavigate the facts at every turn. That is true from
usenet posting protocol perspectives, all the way through the fact
that I did give an answer that should have cleared up your pussy wussy
doubts.

Face it, old man... you cannot stand the fact that you post like a
little mosh pit punk on usenet.

Got clue?

How bout an answer genious!....It will never happen....
Call your teacher...maybe he can answer the question....the more days it
goes the more it appears you do not know your craft...

"DarkMatter" wrote in message
...
On Thu, 09 Oct 2003 20:47:36 GMT, "Ross Mac"
Gave us:

Look closely at the reply....he never answers the question he just starts
up
his diatribe again!


I didn't answer your question. I did, however, put your piddly
little control technology to shame, and the goal you were after was to
query my electronic abilities. It appears that it is YOU that
attempts to circumnavigate the facts at every turn. That is true from
usenet posting protocol perspectives, all the way through the fact
that I did give an answer that should have cleared up your pussy wussy
doubts.

Face it, old man... you cannot stand the fact that you post like a
little mosh pit punk on usenet.

Got clue?

Exactly...you did not answer the question!.....You could not...the best you
could do was to post another technology.....you called it simple...but you
never answered......
"DarkMatter" wrote in message
...
On Thu, 09 Oct 2003 20:47:36 GMT, "Ross Mac"
Gave us:

Look closely at the reply....he never answers the question he just starts
up
his diatribe again!


I didn't answer your question. I did, however, put your piddly
little control technology to shame, and the goal you were after was to
query my electronic abilities. It appears that it is YOU that
attempts to circumnavigate the facts at every turn. That is true from
usenet posting protocol perspectives, all the way through the fact
that I did give an answer that should have cleared up your pussy wussy
doubts.

Face it, old man... you cannot stand the fact that you post like a
little mosh pit punk on usenet.

Got clue?

Exactly...you did not answer the question!.....You could not...the best you
could do was to post another technology.....you called it simple...but you
never answered......
"DarkMatter" wrote in message
...
On Thu, 09 Oct 2003 20:47:36 GMT, "Ross Mac"
Gave us:

Look closely at the reply....he never answers the question he just starts
up
his diatribe again!


I didn't answer your question. I did, however, put your piddly
little control technology to shame, and the goal you were after was to
query my electronic abilities. It appears that it is YOU that
attempts to circumnavigate the facts at every turn. That is true from
usenet posting protocol perspectives, all the way through the fact
that I did give an answer that should have cleared up your pussy wussy
doubts.

Face it, old man... you cannot stand the fact that you post like a
little mosh pit punk on usenet.

Got clue?

That's it huh?....one of your two words......retard and dip****....
Well the answer to the simple question I posed is this:
If you really want to control a 28vdc motor you would use a 65 volt PWM amp
with a choke to dump off the excess voltage and any linear scale or rotary
encoder would do for positioning....Servo lock is obtained by balancing out
the duty cycle on the plus and minus sides of the signal..not a tough
question at all......but after all, you said you were a PE....that is 70's
technology! Tens of thousands of CNC machines are in the field with this
technology. Do you want to send me another brochure?.....That's all your
previous post was...and hey..thanks for the spelling correction....my degree
was Technical....as yours seems to not be!

"DarkMatter" wrote in message
...
On Fri, 10 Oct 2003 01:45:36 GMT, "Ross Mac"
Gave us:

You are, however, are
in the rat race.....with all your genious!


Learn to spell, retard boy. It's genius, dumbass!

That's it huh?....one of your two words......retard and dip****....
Well the answer to the simple question I posed is this:
If you really want to control a 28vdc motor you would use a 65 volt PWM amp
with a choke to dump off the excess voltage and any linear scale or rotary
encoder would do for positioning....Servo lock is obtained by balancing out
the duty cycle on the plus and minus sides of the signal..not a tough
question at all......but after all, you said you were a PE....that is 70's
technology! Tens of thousands of CNC machines are in the field with this
technology. Do you want to send me another brochure?.....That's all your
previous post was...and hey..thanks for the spelling correction....my degree
was Technical....as yours seems to not be!

"DarkMatter" wrote in message
...
On Fri, 10 Oct 2003 01:45:36 GMT, "Ross Mac"
Gave us:

You are, however, are
in the rat race.....with all your genious!


Learn to spell, retard boy. It's genius, dumbass!

You never even came close to an answer, just the usual childish tyrade. You
need serious help with this sickness of yours!
"DarkMatter" wrote in message
news
On Fri, 10 Oct 2003 05:36:25 GMT, "Ross Mac"
Gave us:

That's it huh?....one of your two words......retard and dip****....

If the foo ****s...

Well the answer to the simple question I posed is this:
If you really want to control a 28vdc motor you would use a 65 volt PWM
amp
with a choke to dump off the excess voltage and any linear scale or
rotary
encoder would do for positioning....Servo lock is obtained by balancing
out
the duty cycle on the plus and minus sides of the signal..not a tough
question at all......but after all, you said you were a PE....

No. I did not. I said that I am an engineer. The title is
electrical engineering, dip****. I never said PE. That doesn't make
your petty **** any less trivial, however.

I grew up under a father that worked at Cincinnati Milacron for 35
years. I think that if I can handle hundred thousandth inch
tolerances back in 1970 at the age of ten, I can handle your little
wussy boy tech query about controllers.

You need a PWM shoved up your ass, dip****. You STILL have yet to
face up to your usenet retardedness.

That would be Pussy Whine Modulator in your *special* case.

that is 70's
technology!

Yeah. I was there... I'll bet you weren't even in diapers yet.

Tens of thousands of CNC machines are in the field with this
technology.

No ****. Jet fighters too. Big ol' swing wing F-14s... you mother
****ing retarded *******!

Do you want to send me another brochure?.....

No, dip****. It was a mere tid bit, which was all that was required
to put you back in your ****ing retard barrel, where you belong.

Bwuahahahahhaa...

That's all your
previous post was...and hey..thanks for the spelling correction....my
degree
was Technical....as yours seems to not be!

What part of a good vocabulary, proper spelling, and grammar, AND
proper utilization of writing protocols (got clue?) IS part of a good,
professional attitude, you 45 IQ dufus, do you not understand?

Go and get yerself a clue, boy.

You never even came close to an answer, just the usual childish tyrade. You
need serious help with this sickness of yours!
"DarkMatter" wrote in message
news
On Fri, 10 Oct 2003 05:36:25 GMT, "Ross Mac"
Gave us:

That's it huh?....one of your two words......retard and dip****....

If the foo ****s...

Well the answer to the simple question I posed is this:
If you really want to control a 28vdc motor you would use a 65 volt PWM
amp
with a choke to dump off the excess voltage and any linear scale or
rotary
encoder would do for positioning....Servo lock is obtained by balancing
out
the duty cycle on the plus and minus sides of the signal..not a tough
question at all......but after all, you said you were a PE....

No. I did not. I said that I am an engineer. The title is
electrical engineering, dip****. I never said PE. That doesn't make
your petty **** any less trivial, however.

I grew up under a father that worked at Cincinnati Milacron for 35
years. I think that if I can handle hundred thousandth inch
tolerances back in 1970 at the age of ten, I can handle your little
wussy boy tech query about controllers.

You need a PWM shoved up your ass, dip****. You STILL have yet to
face up to your usenet retardedness.

That would be Pussy Whine Modulator in your *special* case.

that is 70's
technology!

Yeah. I was there... I'll bet you weren't even in diapers yet.

Tens of thousands of CNC machines are in the field with this
technology.

No ****. Jet fighters too. Big ol' swing wing F-14s... you mother
****ing retarded *******!

Do you want to send me another brochure?.....

No, dip****. It was a mere tid bit, which was all that was required
to put you back in your ****ing retard barrel, where you belong.

Bwuahahahahhaa...

That's all your
previous post was...and hey..thanks for the spelling correction....my
degree
was Technical....as yours seems to not be!

What part of a good vocabulary, proper spelling, and grammar, AND
proper utilization of writing protocols (got clue?) IS part of a good,
professional attitude, you 45 IQ dufus, do you not understand?

Go and get yerself a clue, boy.

Sing this to "The Beverly Hillbillies Theme"..
Grab a banjo and sing along DarkMatter!

There once was a Tard Boy and his name was DarkMatter..
He wore a rubber helmet and posted round in here..
And then one day he was being pretty rude..
Then the newsgroups told him to "get a life dude"!...
Troll that is, skippy whipper, pencil neck geek!

The first thing you know he says he's an engineer..
His folks finally said "move away from here".
So he loaded up his helmet and his new set of knee pads.
And flew to San Diego where he became frustrated..
Rubber helmet, knee pads, ball gag!

And now it's time to say goodbye to Tard Boy and his fits.
This tube steak parasite will have to finally give it up..
He's whinin' bout top postin' cuz' he "does not have a life"...
If he'd drop his little skippy, he just might find a wife..

Shot to the Head!
Noose round' the neck!
Whatever it takes!
You all go away now Tard Boy, ya hear?


"DarkMatter" wrote in message
...
On Fri, 10 Oct 2003 07:58:50 -0400, none Gave us:

On Thu, 09 Oct 2003 23:02:22 -0700 DarkMatter
wrote in Message id:
:

I grew up under a father

Dad raped you frequently, did he? That explains much. A pity he didn't
snuff you when he was done having his way with you.


Yet another total retard.

Your mother should be jailed as the criminal she is for the felony
of not flushing your lame ass, the moment you exited hers. Instead,
I'll just flush you, and every subsequent retarded troll **** post you
make.

Sing this to "The Beverly Hillbillies Theme"..
Grab a banjo and sing along DarkMatter!

There once was a Tard Boy and his name was DarkMatter..
He wore a rubber helmet and posted round in here..
And then one day he was being pretty rude..
Then the newsgroups told him to "get a life dude"!...
Troll that is, skippy whipper, pencil neck geek!

The first thing you know he says he's an engineer..
His folks finally said "move away from here".
So he loaded up his helmet and his new set of knee pads.
And flew to San Diego where he became frustrated..
Rubber helmet, knee pads, ball gag!

And now it's time to say goodbye to Tard Boy and his fits.
This tube steak parasite will have to finally give it up..
He's whinin' bout top postin' cuz' he "does not have a life"...
If he'd drop his little skippy, he just might find a wife..

Shot to the Head!
Noose round' the neck!
Whatever it takes!
You all go away now Tard Boy, ya hear?


"DarkMatter" wrote in message
...
On Fri, 10 Oct 2003 07:58:50 -0400, none Gave us:

On Thu, 09 Oct 2003 23:02:22 -0700 DarkMatter
wrote in Message id:
:

I grew up under a father

Dad raped you frequently, did he? That explains much. A pity he didn't
snuff you when he was done having his way with you.


Yet another total retard.

Your mother should be jailed as the criminal she is for the felony
of not flushing your lame ass, the moment you exited hers. Instead,
I'll just flush you, and every subsequent retarded troll **** post you
make.

Glad to hear you enjoyed the tune!


"DarkMatter" wrote in message
news
On Fri, 10 Oct 2003 23:53:20 GMT, "Ross Mac"
Gave us:

pencil neck geek!


Talk about zero originality!

Get a life, chump. While yer at it, learn to refrain from being a
top posting, usenet troll retard.

Glad to hear you enjoyed the tune!


"DarkMatter" wrote in message
news
On Fri, 10 Oct 2003 23:53:20 GMT, "Ross Mac"
Gave us:

pencil neck geek!


Talk about zero originality!

Get a life, chump. While yer at it, learn to refrain from being a
top posting, usenet troll retard.

Glad to see you are keeping your originality!


"DarkMatter" wrote in message
news
On Fri, 10 Oct 2003 23:53:20 GMT, "Ross Mac"
Gave us:

pencil neck geek!


Talk about zero originality!

Get a life, chump. While yer at it, learn to refrain from being a
top posting, usenet troll retard.

Glad to see you are keeping your originality!


"DarkMatter" wrote in message
news
On Fri, 10 Oct 2003 23:53:20 GMT, "Ross Mac"
Gave us:

pencil neck geek!


Talk about zero originality!

Get a life, chump. While yer at it, learn to refrain from being a
top posting, usenet troll retard.

DarkManure in a NONE suit...how cute....
You have a history dude...your threads ALWAYS have posts from "@." and
"none"....just look at your sorry self over at sci. electronics.misc same
old tired crap.....

"none" wrote in message
news
On Fri, 10 Oct 2003 21:12:54 -0700 DarkMatter
wrote in Message id:
:

On Fri, 10 Oct 2003 23:53:20 GMT, "Ross Mac"
Gave us:

pencil neck geek!


Talk about zero originality!



-#######+
# x##, ###
# X# #X
## -# # #
=## ## # #
### ### # #
###; ### # # #
=##X x### ### # # , #
-###X ###X #### ## ; #############+;=
x####, +### #### ### ,### #################=
##### ### ### .###+ ##. ###################
##### ##-## #### ########################
. .,- X##-####### #######################
###########x-####### +#####################
+######x### =#X=. #####################,
#+ # #x#################.+
## x#

####### ## # ##### ## ##
## ## ## ### ## ## ## ##
## ## ## # # ## ## ##
####### ## ## ## ## ######
## ## ## ######### ## ## ##
## ## ## ### ### ## ## ## ##
####### ###### #### #### ##### ## ##


Get a life, chump. While yer at it, learn to refrain from being a
top posting, usenet troll retard.

Wow, you whine about originality, and just look at your output, you
hypocritical Sad-Sack.

I got a bridge I want to sell you Tard Boy!.....


"DarkMatter" wrote in message
...
On Tue, 14 Oct 2003 23:47:38 GMT, "Ross Mac"
Gave us:

DarkManure in a NONE suit...how cute....
You have a history dude...your threads ALWAYS have posts from "@." and
"none"....just look at your sorry self over at sci. electronics.misc same
old tired crap.....

You're an idiot, you top posting troll retard.

You have a history of being 100% wrong.

It is some other poster. One that is more lame than even you.
Hard to imagine that, but in usenet, we see it all.

Time again for your favorite song....

Sing this to "The Beverly Hillbillies Theme"..
Grab a banjo and sing along DarkMatter!

There once was a Tard Boy and his name was DarkMatter..
He wore a rubber helmet and posted round in here..
And then one day he was being pretty rude..
Then the newsgroups told him to "get a life dude"!...
Troll that is, skippy whipper, pencil neck geek!

The first thing you know he says he's an engineer..
His folks finally said "move away from here".
So he loaded up his helmet and his new set of knee pads.
And flew to San Diego where he became frustrated..
Rubber helmet, knee pads, ball gag!

And now it's time to say goodbye to Tard Boy and his fits.
This tube steak parasite will have to finally give it up..
He's whinin' bout top postin' cuz' he "does not have a life"...
If he'd drop his little skippy, he just might find a wife..

Shot to the Head!
Noose round' the neck!
Whatever it takes!
You all go away now Tard Boy, ya hear?


"DarkMatter" wrote in message
...
On Fri, 17 Oct 2003 00:27:20 GMT, "Ross Mac"
Gave us:

I got a bridge I want to sell you Tard Boy!.....

Wrong again. You have no bridge, liar, and you still don't know how
to post correctly in usenet. You are batting 1000 in the stupid
department, boy.

Or while it's taking a dump, which I think is the only
appropriate response to any form of royalty or other
authoritarian figure. ;-)

Ian Buckner wrote:

"Bushy" wrote in message
...

OK Watson, I give up. What effect does it have on the cat??

If you haven't got a cat, then paint a little on your bum!

It's a bit rougher and harsher than the finger covered in ginger up

the Arab

horses bum, to get it to lift it's tail for the showring!

And you though it was natural to have that high tail carriage!

Peter




It happens that I have a couple of Arab horses in one of my fields at
the moment,
and I have bred an Arab cross thoroughbred in the past. The high tail
carriage
(waving the flag) is indeed natural, when excited or just for the hell
of it.

Regards
Ian