Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Grease
What type of grease can I use for lubricating the VCR mechanism etc..
Boozo. |
#2
|
|||
|
|||
Grease
What type of grease can I use for lubricating the VCR mechanism etc..
Molytone grease is recommended for relubing parts that require a low-medium viscosity grease, but white litium is an acceptable substitute for most mechanical needs. Some, however, will require something with less viscosity than white lithium to run properly, which is why molytone is preferred. - Reinhart |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
SDS bit grease | UK diy | |||
Grease or Oil in Old Lathe? | Woodworking | |||
Lithium molybdenum disulphide grease | UK diy | |||
Silicone Grease Not Found. Vaseline as an Alternative? | UK diy | |||
New Rockwell lathe and some questions about it. | Metalworking |