Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Radio Shack Model 277-1008 Mini Amplifier For Person with Disability:Where To Get Now
Hello,
Hoping someone here might know. Have been using a Radio Shack Mini Amplifier Model No. 277-1008 for many years to help out a person with a disability. Really important for them As no longer a R/S, have been trying to find who might actually make/made this unit, and/or who might still be carrying them. Anyone have any ideas where I can purchase a few. Much hanks, Bob |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Radio Shack Model 277-1008 Mini Amplifier For Person with Disability: Where To Get Now
On Sun, 09 Aug 2015 12:45:55 -0400, Bob wrote:
Have been using a Radio Shack Mini Amplifier Model No. 277-1008 for many years to help out a person with a disability. Really important for them It's still in the catalog: http://comingsoon.radioshack.com/radioshack-mini-audio-amplifier/2771008.html As no longer a R/S, have been trying to find who might actually make/made this unit, and/or who might still be carrying them. Rumors of Radio Shack's demise have been greatly eggagerated. Many stores are still open as is their mail order business. Anyone have any ideas where I can purchase a few. Online. See above URL. Or eBay at outrageous prices: http://www.ebay.com/sch/i.html?_nkw=277-1008 -- Jeff Liebermann 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558 |
#3
Posted to sci.electronics.repair
|
|||
|
|||
Radio Shack Model 277-1008 Mini Amplifier For Person with Disability: Where To Get Now
On Sun, 09 Aug 2015 09:53:14 -0700, Jeff Liebermann
wrote: On Sun, 09 Aug 2015 12:45:55 -0400, Bob wrote: Have been using a Radio Shack Mini Amplifier Model No. 277-1008 for many years to help out a person with a disability. Really important for them It's still in the catalog: http://comingsoon.radioshack.com/radioshack-mini-audio-amplifier/2771008.html As no longer a R/S, have been trying to find who might actually make/made this unit, and/or who might still be carrying them. Rumors of Radio Shack's demise have been greatly eggagerated. Many stores are still open as is their mail order business. Oops. Looks like the mail order business isn't there any more. However, the store search found several stores that allegedly have it in stock. -- Jeff Liebermann 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558 |
#4
Posted to sci.electronics.repair
|
|||
|
|||
Radio Shack Model 277-1008 Mini Amplifier For Person with Disability:Where To Get Now
I use these for simple hearing assist. No volume controls but nice. http://www.smokeyamps.com/
|
#5
Posted to sci.electronics.repair
|
|||
|
|||
Radio Shack Model 277-1008 Mini Amplifier For Person with Disability: Where To Get Now
"Bob" wrote in message ... Hello, Hoping someone here might know. Have been using a Radio Shack Mini Amplifier Model No. 277-1008 for many years to help out a person with a disability. Really important for them As no longer a R/S, have been trying to find who might actually make/made this unit, and/or who might still be carrying them. Anyone have any ideas where I can purchase a few. Another alternative is an amplified PC speaker, if the input impedance is too low just add a JFET source follower. You can use the volume pot as rhe source resistor, then all you need is a gate-leak resistor and input coupling capacitor. Most types run off a wall-wart, but you can get them with an internal battery compartment. A couple of years back; a columnist in one of the hobby magazines mentioned a speaker amplifier unit for Walkman style gadgets in the £1 shop - needless to say, all gone by the time I got there. Apparently the unit had a pair of small speakers driven by a TDA2822. Ready made amplifiers aren't exactly rare, back in the 70s - 80s, any number of component stockists advertised small amplifiers (just a populated PCB) around the 250mW mark. An old vest pocket transistor radio is a good candidate for the JFET modification - but those are often collectibles, such vandalism would horrify some people. |
#6
Posted to sci.electronics.repair
|
|||
|
|||
Radio Shack Model 277-1008 Mini Amplifier For Person with Disability: Where To Get Now
Search for Personal Amplifier on Amazon.com. There are several there that
have builtin microphones, but use earphones instead of a builtin speaker. Prices are generally under $30. My dad used one of those amplifiers for several years before his death. Sorry, but it's long gone now, else I'd be glad to send it to you. If you're into electronics kits, you might check out the kit at http://www.bgmicro.com/KITMK136.aspx. Looks interesting, small enough to put into a small box with a battery and carry in your shirt pocket. And it's STEREO!! Cheers, Dave M Bob wrote: Hello, Hoping someone here might know. Have been using a Radio Shack Mini Amplifier Model No. 277-1008 for many years to help out a person with a disability. Really important for them As no longer a R/S, have been trying to find who might actually make/made this unit, and/or who might still be carrying them. Anyone have any ideas where I can purchase a few. Much hanks, Bob |
#7
Posted to sci.electronics.repair
|
|||
|
|||
Radio Shack Model 277-1008 Mini Amplifier For Person with Disability: Where To Get Now
"Dave M" wrote in message ... Search for Personal Amplifier on Amazon.com. There are several there that have builtin microphones, but use earphones instead of a builtin speaker. Prices are generally under $30. My dad used one of those amplifiers for several years before his death. Sorry, but it's long gone now, else I'd be glad to send it to you. If you're into electronics kits, you might check out the kit at http://www.bgmicro.com/KITMK136.aspx. Looks interesting, small enough to put into a small box with a battery and carry in your shirt pocket. And it's STEREO!! A stereo unit can be a PITA if you only want mono, but if its a common chip and not already BTL, most have a sample circuit for a BTL amp included in the appnote. |
#8
Posted to sci.electronics.repair
|
|||
|
|||
Radio Shack Model 277-1008 Mini Amplifier For Person with
On Sun, 9 Aug 2015, Ian Field wrote:
"Bob" wrote in message ... Hello, Hoping someone here might know. Have been using a Radio Shack Mini Amplifier Model No. 277-1008 for many years to help out a person with a disability. Really important for them As no longer a R/S, have been trying to find who might actually make/made this unit, and/or who might still be carrying them. Anyone have any ideas where I can purchase a few. Another alternative is an amplified PC speaker, if the input impedance is too low just add a JFET source follower. You can use the volume pot as rhe source resistor, then all you need is a gate-leak resistor and input coupling capacitor. Most types run off a wall-wart, but you can get them with an internal battery compartment. A couple of years back; a columnist in one of the hobby magazines mentioned a speaker amplifier unit for Walkman style gadgets in the £1 shop - needless to say, all gone by the time I got there. Apparently the unit had a pair of small speakers driven by a TDA2822. Ready made amplifiers aren't exactly rare, back in the 70s - 80s, any number of component stockists advertised small amplifiers (just a populated PCB) around the 250mW mark. An old vest pocket transistor radio is a good candidate for the JFET modification - but those are often collectibles, such vandalism would horrify some people. And there's sort of a return to all this. In the old days, stereos were big, now everyone with their Walkman, oops iPod, are throwing out their stereo system and replacing it with a docking station, which is just an amplifier with speakers in the same box, so stereo separation is virtually non-existent. Oddly, there was a period when boomboxes included auxiliary inputs, because they wanted to be "ready" for CD players that were either not yet out, or too expensive to build into the thing. So they also have auxiliary inputs, if they are of the right vintage. Anything with an amplifier should be useful, just find a way to feed the audio into it. In the old days it was easy, the top of the volume control would be the place, a coupling capacitor would make sure all was safe. But now, the volume control may not be a suitable marker, the control may not be attenuating the audio signal, but varying a DC voltage to control a stage that is controlling volume. Michael |
#9
Posted to sci.electronics.repair
|
|||
|
|||
Radio Shack Model 277-1008 Mini Amplifier For Person with
"Anything with an amplifier should be useful, just find a way to feed the
audio into it. In the old days it was easy, the top of the volume control would be the place, a coupling capacitor would make sure all was safe. But now, the volume control may not be a suitable marker, the control may not be attenuating the audio signal, but varying a DC voltage to control a stage that is controlling volume." Or a rotary encoder going to the microprocessor. |
#10
Posted to sci.electronics.repair
|
|||
|
|||
Radio Shack Model 277-1008 Mini Amplifier For Person with Disability: Where To Get Now
|
#11
Posted to sci.electronics.repair
|
|||
|
|||
Radio Shack Model 277-1008 Mini Amplifier For Person with Disability: Where To Get Now
"Michael Black" wrote in message news:alpine.LNX.2.02.1508092125250.25787@darkstar. example.org... On Sun, 9 Aug 2015, Ian Field wrote: "Bob" wrote in message ... Hello, Hoping someone here might know. Have been using a Radio Shack Mini Amplifier Model No. 277-1008 for many years to help out a person with a disability. Really important for them As no longer a R/S, have been trying to find who might actually make/made this unit, and/or who might still be carrying them. Anyone have any ideas where I can purchase a few. Another alternative is an amplified PC speaker, if the input impedance is too low just add a JFET source follower. You can use the volume pot as rhe source resistor, then all you need is a gate-leak resistor and input coupling capacitor. Most types run off a wall-wart, but you can get them with an internal battery compartment. A couple of years back; a columnist in one of the hobby magazines mentioned a speaker amplifier unit for Walkman style gadgets in the £1 shop - needless to say, all gone by the time I got there. Apparently the unit had a pair of small speakers driven by a TDA2822. Ready made amplifiers aren't exactly rare, back in the 70s - 80s, any number of component stockists advertised small amplifiers (just a populated PCB) around the 250mW mark. An old vest pocket transistor radio is a good candidate for the JFET modification - but those are often collectibles, such vandalism would horrify some people. And there's sort of a return to all this. In the old days, stereos were big, now everyone with their Walkman, oops iPod, are throwing out their stereo system and replacing it with a docking station, which is just an amplifier with speakers in the same box, so stereo separation is virtually non-existent. Oddly, there was a period when boomboxes included auxiliary inputs, because they wanted to be "ready" for CD players that were either not yet out, or too expensive to build into the thing. So they also have auxiliary inputs, if they are of the right vintage. Anything with an amplifier should be useful, just find a way to feed the audio into it. In the old days it was easy, the top of the volume control would be the place, a coupling capacitor would make sure all was safe. But now, the volume control may not be a suitable marker, the control may not be attenuating the audio signal, but varying a DC voltage to control a stage that is controlling volume. Most of the older shirt pocket items had about 4k7 volume pot, usually this is too low for most signal sources you might want to patch into it. My solution is to build a JFET source follower onto the input, you can use the pot as the source resistor, in front of the JFET you only need a gate-leak resistor and coupling cap. |
#12
Posted to sci.electronics.repair
|
|||
|
|||
Radio Shack Model 277-1008 Mini Amplifier For Person with
On 8/9/2015 12:45 PM, Bob wrote:
Hello, Hoping someone here might know. Have been using a Radio Shack Mini Amplifier Model No. 277-1008 for many years to help out a person with a disability. Really important for them As no longer a R/S, have been trying to find who might actually make/made this unit, and/or who might still be carrying them. Anyone have any ideas where I can purchase a few. Much hanks, Bob Bob, There happens to be a new one on e-bay right now, for what I think is too much money: http://www.ebay.com/itm/Radioshack-M...item3cffb46b6b If you watch e-bay and similar sites for a while you may find a few. Regards, Tim |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Belts Radio Shack SCT-540 | Electronics Repair | |||
FA: Radio Shack HTX-10 | Electronics Repair | |||
Looking for schematic and board layout for Radio Shack Model 21-543 DSP 40 Noise Reduction System | Electronics Repair | |||
Radio Shack 22-168A | Electronics Repair | |||
Anyone have a Radio Shack Multimeter #22-168? | Electronics Repair |