Temperature Measurement With A Multimeter ???
There are "zero degree (celsius) chips that generate a compensation
voltage referred to the ambient temperature like the comprensation part of the thermocouple, AD makes them an LT too. Frank Bill wrote: I have a digital multimeter that measures temperature with a "type K" thermal probe. I believe this is a chromel alumel thermocouple. A thermocouple normally generates a voltage which is proportional to the difference in temperature between two junctions. In the lab if one junction is held at a know temperature, usually iced water, and the other junction is held at the temperature to be measured. The temperature difference between the two junctions generates a small voltage that is proportional to the difference between the two junctions. Ok so what does the multimeter do to control the reference temperature? The multimeter is at used in varying ambient temperatures so it would seem that there must be some for of compensation going on. Any ideas how this works. My experience with this unit is that it is not very accurate around normal ambient temperatures. Bill |
All times are GMT +1. The time now is 04:03 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter