Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
BestestWorker
 
Posts: n/a
Default Car Antena problem

When the radio is on AM, I can hardly hear my favorite channels. When I touch
the antenna the signal comes in much stronger. I am about 40 miles from the
transmitter. FM is no problem from the same distance.

Other than clipping a wire to the antenna and wrapping it to my wrist while I
drive, is there anything that you can suggest?

TIA
  #2   Report Post  
Terry
 
Posts: n/a
Default Car Antena problem

BestestWorker wrote:

When the radio is on AM, I can hardly hear my favorite channels. When I touch
the antenna the signal comes in much stronger. I am about 40 miles from the
transmitter. FM is no problem from the same distance.

Other than clipping a wire to the antenna and wrapping it to my wrist while I
drive, is there anything that you can suggest?

TIA


You didn't mention if has always been that way or went faulty in
that manner. Is it a 'factory installed' original or was radio
added or changed since the car was made? What kind of antenna is
it?
If it's always been like that you may find that there is a small
'trimmer' adjustment screw that tunes/adjust for the particular
antenna situation in your car that was never 'set up' right in
the first instance. These can sometimes have a very big effect on
how strongly the signal is received and possibly more so on AM
than FM?
Other than that there may be break in the wire in the cable from
antenna to set. A loose or disconnected plug or corrosion and/or
short circuiting at the base of the antenna. Because of the
higher frequency of FM sometimes these problems can deaden AM
more than FM signals.
More (a lot more) information needed!
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Quick Change TP problem Cuezilla Metalworking 3 April 21st 04 04:46 AM
jointer problem Rick Swartout Woodworking 1 November 28th 03 07:41 AM
Boiler Problem Gradually Getting Worse Frank Davis UK diy 1 October 23rd 03 10:00 PM
Problem with JET Supersaw problem dteckie Woodworking 3 September 16th 03 12:45 AM
Sears air compressor starting problem Barry Criner Woodworking 0 July 13th 03 09:39 PM


All times are GMT +1. The time now is 04:39 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"