DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Unknown monitor repair/substitution... (https://www.diybanter.com/electronics-repair/37325-re-unknown-monitor-repair-substitution.html)

Franc Zabkar July 25th 03 12:26 PM

Unknown monitor repair/substitution...
 
On Fri, 25 Jul 2003 08:24:11 -0000, Uns Lider
put finger to keyboard and composed:

In article , Dr. Roberto VALENTE wrote:
I was able to recover the original video card pin layout and wanted to
attach a PC monitor to it. The problem is I have never seen this
layout before.
1 Composite Video

Video and sync mixed together.
2 GND
3 VID

Video only, no sync.
4 HRTC

Horizontal retrace.
5 VRTC

Vertical retrace.
6 Composite Video Ground
7 LPEN

Sensor input from light pen. Since there's no power supply on the connector,
this probably goes straight to the phototransistor.
8 LPEN GND
9 M.D. (no idea what this means!!!)

Trace it out?


Manual Degauss????


- Franc Zabkar
--
Please remove one 's' from my address when replying by email.


All times are GMT +1. The time now is 09:09 PM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2004 - 2014 DIYbanter