Looking for a Pioneer DV 434 (DVD) service Manual or Help!
 

I have a Pioneer DV-434 dvd player that plays most of the disc fine but once
it starts to get near the end of the disc starts to pixilate and distort.
Very much like rain fade on a sat dish, where the whole picture doesn't mess
up but certain parts start to pixilate. I tried adjusting the two vr on the
side of the laser assembly but I don't know what test point I should be
checking and what to be checking for, Any help would be appreciated. Thanks
in advance.

Looking for a Pioneer DV 434 (DVD) service Manual or Help!
 

It'll need a new pickup. Sorry. It's sold as a complete unit with the
spindle and sled motor.

Mark Z.


"Avrbuster" wrote in message
...
I have a Pioneer DV-434 dvd player that plays most of the disc fine but
once
it starts to get near the end of the disc starts to pixilate and distort.
Very much like rain fade on a sat dish, where the whole picture doesn't
mess
up but certain parts start to pixilate. I tried adjusting the two vr on
the
side of the laser assembly but I don't know what test point I should be
checking and what to be checking for, Any help would be appreciated.
Thanks
in advance.

Looking for a Pioneer DV 434 (DVD) service Manual or Help!
 

Thanks for your help, Can you explain why a new pickup, how do you know it
the pickup? (not tring to be rude just curious, does this symtom occur on
other dvd players as well or just limited to pioneer? And could you give me
a rought cost estimate. Is it going to be easier and more cost effective to
buy a new unit? Thanks very much for your time!

Kevin

"Mark D. Zacharias" wrote in message
thlink.net...
It'll need a new pickup. Sorry. It's sold as a complete unit with the
spindle and sled motor.

Mark Z.

Looking for a Pioneer DV 434 (DVD) service Manual or Help!
 

It's THE classic symptom of a deteriorated laser pickup on a DVD player.

I'd have to look up the part price, and there's a difference between what a
servicer would pay for the part, and the "retail" price a private individual
would pay. Then there's labor to install and set up

Could be more than the cost of a new one. Maybe 130.00 to 140.00.

Mark Z.


"Avrbuster" wrote in message
...
Thanks for your help, Can you explain why a new pickup, how do you know it
the pickup? (not tring to be rude just curious, does this symtom occur on
other dvd players as well or just limited to pioneer? And could you give
me
a rought cost estimate. Is it going to be easier and more cost effective
to
buy a new unit? Thanks very much for your time!

Kevin

"Mark D. Zacharias" wrote in message
thlink.net...
It'll need a new pickup. Sorry. It's sold as a complete unit with the
spindle and sled motor.

Mark Z.

Looking for a Pioneer DV 434 (DVD) service Manual or Help!
 

Actually, could be even more than 140.00


mz


"Mark D. Zacharias" wrote in message
thlink.net...
It's THE classic symptom of a deteriorated laser pickup on a DVD player.

I'd have to look up the part price, and there's a difference between what
a
servicer would pay for the part, and the "retail" price a private
individual
would pay. Then there's labor to install and set up

Could be more than the cost of a new one. Maybe 130.00 to 140.00.

Mark Z.


"Avrbuster" wrote in message
...
Thanks for your help, Can you explain why a new pickup, how do you know
it
the pickup? (not tring to be rude just curious, does this symtom occur
on
other dvd players as well or just limited to pioneer? And could you
give
me
a rought cost estimate. Is it going to be easier and more cost
effective
to
buy a new unit? Thanks very much for your time!

Kevin

"Mark D. Zacharias" wrote in message
thlink.net...
It'll need a new pickup. Sorry. It's sold as a complete unit with the
spindle and sled motor.

Mark Z.

Looking for a Pioneer DV 434 (DVD) service Manual or Help!
 

Well that sucks, Thanks for your help I was hoping it would be something
simple. One more question, why does it only seem to do it at the outer
edge of the disk? If the laser was deteriorated laser why not on the whole
disc why just 1/2" from the end of the disc. Thanks for all your time!

Kevin

"Mark D. Zacharias" wrote in message
thlink.net...
Actually, could be even more than 140.00


mz


"Mark D. Zacharias" wrote in message
thlink.net...
It's THE classic symptom of a deteriorated laser pickup on a DVD player.

I'd have to look up the part price, and there's a difference between
what
a
servicer would pay for the part, and the "retail" price a private
individual
would pay. Then there's labor to install and set up

Could be more than the cost of a new one. Maybe 130.00 to 140.00.

Mark Z.

Looking for a Pioneer DV 434 (DVD) service Manual or Help!
 

Marginal pickups do this after playing a while. It has to do with time,
heat, laser emission, etc. Skipping, freezing, pixelating after playing a
while is a classic symptom. I would say, however, Pioneers are better than
most so far as pickup life is concerned.

Mark Z.


"Avrbuster" wrote in message
...
Well that sucks, Thanks for your help I was hoping it would be something
simple. One more question, why does it only seem to do it at the outer
edge of the disk? If the laser was deteriorated laser why not on the
whole
disc why just 1/2" from the end of the disc. Thanks for all your time!

Kevin

"Mark D. Zacharias" wrote in message
thlink.net...
Actually, could be even more than 140.00


mz


"Mark D. Zacharias" wrote in message
thlink.net...
It's THE classic symptom of a deteriorated laser pickup on a DVD
player.

I'd have to look up the part price, and there's a difference between
what
a
servicer would pay for the part, and the "retail" price a private
individual
would pay. Then there's labor to install and set up

Could be more than the cost of a new one. Maybe 130.00 to 140.00.

Mark Z.