alliance antenna rotor
I re- built a Alliance rotor, but had no rotor box, found one, but I do not
know how to hook the wires to the four connector. can you advise? Thank you.TED -- +-----------------[ SERVER SIGNATURE ]-----+ | posted via http://www.electrondepot.com | | Web, RSS and Social Media Interface to | | sci.electronics.repair and other groups | +------------------------------------------+ |
alliance antenna rotor
Ted wrote:
I re- built a Alliance rotor, but had no rotor box, found one, but I do not know how to hook the wires to the four connector. can you advise? Thank you.TED http://n3ujj.com/manuals/U-110%20Manual.pdf?? |
alliance antenna rotor
Which model? I have diagrams for a few models.
Dave M Ted wrote: I re- built a Alliance rotor, but had no rotor box, found one, but I do not know how to hook the wires to the four connector. can you advise? Thank you.TED |
alliance antenna rotor
On Monday, September 30, 2013 9:18:02 AM UTC-7, Ted wrote:
I re- built a Alliance rotor, but had no rotor box, found one, but I do not know how to hook the wires to the four connector. can you advise? Thank you.TED -- +-----------------[ SERVER SIGNATURE ]-----+ | posted via http://www.electrondepot.com | | Web, RSS and Social Media Interface to | | sci.electronics.repair and other groups | +------------------------------------------+ Rotors mean no DVRs can be used. Puts a little bit of a hitch in your giddyup. G² |
alliance antenna rotor
What does a rotor have to do with a DVR, the rotor only orients the antenna unles you have found some new use for one!
|
alliance antenna rotor
|
alliance antenna rotor
On Friday, October 4, 2013 2:05:21 PM UTC-7, wrote:
What does a rotor have to do with a DVR, the rotor only orients the antenna unles you have found some new use for one! You're really asking such a silly question? I have computers recording TV 6 nights a week. You go turning the antenna and the reception goes bye bye. I don't know of any recording software that could re-aim the antenna first. If it were mine, I'd forgo the rotator and use multiple antennas and then jointenna diplexers to make one clean RF feed where all channels are available all the time. A private MATV system. G² |
All times are GMT +1. The time now is 06:47 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter