Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 5,247
Default Carlsbro Keyboard 150 , 15 inch combo from 1985

TO220 devices marked 40871 and 40872 and also SM are presumable RCA40871 /2
, anyone happen to know what the TO3 devices are , presumably NPN and PNP,
cold test seem ok. Usual Carlsbro, locked behind rivetted heatsink,
otherwise prea looks like HH Marlin type amps


  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 5,247
Default Carlsbro Keyboard 150 , 15 inch combo from 1985

I should know the identity of the TO3 tomorrow , both NPN on rechecking.
Loose Collector bolts so I have to get to the other side to tighten. Not
rivets , looked superficially like aluminium rivets . On Googling ,maybe cct
similar to this admirable effort at unravelling to a schematic, the Stingray
amp

http://ax84.com/bbs/dm.php?thread=467875


  #3   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 5,247
Default Carlsbro Keyboard 150 , 15 inch combo from 1985

Even more like the Stingray. 2x MJ802 , 1 BC182 and 3xBC557 instead of 3x
bc212.
Soft blown (not blacjened) ps fuses and mains fuse , then abandoned for 10
years, no recollection of original failure scenario and nothing found, cold
so far , a likely culprit


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CARLSBRO VIPER 100 schematic [email protected] Electronics Repair 3 January 22nd 12 10:33 AM
DEWALT D51430 Heavy-Duty 1-Inch to 2-Inch 16-Gauge 7/16-inch Medium Crown Stapler [email protected] Home Ownership 0 May 22nd 09 01:18 PM
Carlsbro BassBeaver combo n cook Electronics Repair 6 December 2nd 06 09:37 AM
LED moving message sign programmed with IR keyboard: Missing keyboard...possible solutions? 427Cobraman Electronics Repair 5 October 26th 06 02:15 AM
Just in case: (cherry keyboard pinout) - it was: help on soldering a 5 pin din connector to a keyboard Lotas Electronics Repair 0 June 9th 06 11:27 AM


All times are GMT +1. The time now is 01:48 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"