Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 1,630
Default Tektronix 76XX series question + parting out

I have two 7B50s, which are single time base. Can the 7603 mainframe take two and using say "ALT" mode have dual time bese ? I rally haven't looked into it but I will.

Anyway, I am going to part out a 7613. I inherited it with a fried PS, and I can't be sure there is not a short in the mainframe. This is a mesh CRT storage unit so the CRT is worth more than some houses. Of course that is not what I am charging, but be aware that it is a strong CRT and has no burn at all.

I also likely to part out my 561. I know it needs caps, or almost know. It has a trace but it is not flat. It also has a nice strong CRT with no burn.

Generally, I will sell these parts reasonable, and also I would trade one of the 7B50s for ANY vertical plugin to fit the 7603.

I also have a 422 that is not right and I am thinking of offing that as well. I am sure I had a 310 around but I can't seem to find it. Little ****er got lost somehow I guess.

What you got and what you want ? I prefer trades.

J
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Parting out a Monarch C series 16 inch lathe? Ignoramus17548 Metalworking 7 April 11th 14 01:00 PM
A Guide to the TEKTRONIX Series 2000 Oscilloscopes LW Electronics 4 May 29th 08 10:38 PM
A Guide to the TEKTRONIX Series 2000 Oscilloscopes LW Electronics Repair 4 May 29th 08 10:38 PM
Tektronix 2200 Series Oscilloscopes Richard Henne Electronics Repair 2 February 20th 04 05:45 AM
Is anyone parting out a Pioneer SD-P50xx series PTV? Leonard Caillouet Electronics Repair 11 September 27th 03 07:57 AM


All times are GMT +1. The time now is 12:56 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"