Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3
Default Beckman FG2 function generator

Hi guys, I have a problem with an old function generator.
The duty-cycle adj. and the invert switch don't work :-(
The square wave it's ok up to 200 kHz.
I'm searching for a (free) service manual.
Is there anyone who can help me ?
Thanks

Piero


  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 5,247
Default Beckman FG2 function generator

Piero wrote in message
. ..
Hi guys, I have a problem with an old function generator.
The duty-cycle adj. and the invert switch don't work :-(
The square wave it's ok up to 200 kHz.
I'm searching for a (free) service manual.
Is there anyone who can help me ?
Thanks

Piero



http://elektrotanya.com/

enter Beckman in searchbox


  #3   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3
Default Beckman FG2 function generator

http://elektrotanya.com/

enter Beckman in searchbox


There's the "operator manual" only.
I've already it.
Thanks

Piero


  #4   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 1,569
Default Beckman FG2 function generator

On Sat, 26 May 2012 12:26:21 +0200, "Piero" put finger
to keyboard and composed:

http://elektrotanya.com/

enter Beckman in searchbox


There's the "operator manual" only.


The circcuit diagrams are at the end of the operator manual.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
  #5   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3
Default Beckman FG2 function generator

The circcuit diagrams are at the end of the operator manual.

The diagrams are quite intelligible, anyway I found the problem :-)
It was a pot interrupted !
Thanks,
Piero


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Function Generator - FunctionGen.pdf Jim Thompson Electronic Schematics 3 February 23rd 08 06:17 PM
WTB-Function Generator/nail driver whit3rd Metalworking 1 February 11th 08 04:00 PM
Wavetek 420 function generator manual JM Electronics Repair 0 January 13th 06 05:23 PM
Need HP8116A Function Generator Schematics milkyway Electronics Repair 0 November 18th 05 04:08 AM
Function Generator Schematic Eric Risch Electronics 0 September 9th 04 10:02 PM


All times are GMT +1. The time now is 01:00 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"