Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 5,247
Default Renovating a Shure mic

Shure 518SA Unisphere B. The dome was mangled from being dropped a few times
but electronically fine.
Bashing the proud parts of the dome with a lead-faced hammer , dome cupped
in hand , has improved that immensely . And oven cleaner has removed all the
tobacco and gunge, perhaps too well. But there is an overall cant to the
dome, there before I got to it, how to bring it back to axial?
The ring around the outside of the dome is still in place
The thread is 34.6 mm / 1 3/8 inch ? external diameter , what metalic
something to screw in there rather than the mic body , or avoid
lathe-turning a thread on a bar? or how to grip the interior ledge of the
mount , inside the dome, with an expanding chuck or something ,lay the dome
in a padded hollow of some sort, and lean into it with the bar to grip or
whatever.


  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 5,247
Default Renovating a Shure mic

Did not require as much force as I thought and vaguely screwing the mesh
dome over a length of 35mm diameter plastic waste-water pipe was all that
was needed, pushing dome into a block of expanded polystyrene


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shure Mixer M67 Shure Mixer M67 {1979].pdf [1/2] oppie Electronic Schematics 5 May 27th 08 02:27 PM
Shure Mixer M67 Shure Mixer M67 {1979].pdf [2/2] oppie Electronic Schematics 0 May 22nd 08 04:16 AM
Shure M610 Feedmack controller Shure Feedback controller M610.pdf [2/2] oppie Electronic Schematics 0 May 22nd 08 04:00 AM
Shure M610 Feedmack controller Shure Feedback controller M610.pdf [1/2] oppie Electronic Schematics 0 May 22nd 08 03:59 AM
connecting Shure SM58 mike to shure vhf wireless beltpack tg Electronics 0 August 8th 05 03:55 PM


All times are GMT +1. The time now is 11:53 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"