Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 12
Default BOSCH UNEO

Hello everyone,
I have a problem with a cordless screwdriver BOSCH Model UNEO;
few days ago, while I was using,
I fell to the ground the screwdriver;
after opening it, I discovered that he had broken an integrated
circuit
IC1 (SOT23-5);
Unfortunately, even reading his name (F05), I could not discover his
complete code;
can someone help me, pointing to the value for this, or provide the
service manual of the tool.
Thanks to all
good job
Joseph IK2UMD














  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 5,247
Default BOSCH UNEO

RGR-74 wrote in message
...
Hello everyone,
I have a problem with a cordless screwdriver BOSCH Model UNEO;
few days ago, while I was using,
I fell to the ground the screwdriver;
after opening it, I discovered that he had broken an integrated
circuit
IC1 (SOT23-5);
Unfortunately, even reading his name (F05), I could not discover his
complete code;
can someone help me, pointing to the value for this, or provide the
service manual of the tool.
Thanks to all
good job
Joseph IK2UMD





So what else active , is on the pcb?
Other than on/off /speed control, reversing switch? torque control?




  #3   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 12
Default BOSCH UNEO

Hello N_Cook,
the damaged component is mounted on the PCB,
SMD is a component, has 5-pin, its format is SOT23-5,
is shown in the screen printing with IC1,
as I read on the component F05
(but could be a symbol-encoded partial, because the component is open-
crack);
I gave directly voltage to engine and it worked,
but does not work with the start button, I checked with the tester
that there was voltage integrated power over others;
for the moment can not seem to make other checks.
On/off /speed control/reversing switch and torque control don't
work.
Thank you for any help.

Joseph IK2UMD

On 1 Feb, 17:54, "N_Cook" wrote:
RGR-74 wrote in message

...





Hello everyone,
*I have a problem with a cordless screwdriver BOSCH Model UNEO;
*few days ago, while I was using,
*I fell to the ground the screwdriver;
*after opening it, I discovered that he had broken an integrated
circuit
*IC1 (SOT23-5);
*Unfortunately, even reading his name (F05), I could not discover his
complete code;
*can someone help me, pointing to the value for this, or provide the
service manual of the tool.
*Thanks to all
*good job
*Joseph IK2UMD


So what else active , is on the pcb?
Other than on/off /speed control, *reversing switch? torque control?- Nascondi testo citato

- Mostra testo citato -


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bosch Uneo The Medway Handyman UK diy 5 October 10th 08 10:42 AM
Random orbit sanders - green Bosch PEX400 vs blue Bosch GEX 125? Andy Dingley UK diy 4 January 12th 08 09:56 PM
Bosch Stormport Woodworking Plans and Photos 7 December 24th 07 02:31 AM
Bosch SDS John Rumm UK diy 4 March 25th 05 10:44 PM
Bosch bye-bye John Woodworking 18 December 2nd 04 05:45 AM


All times are GMT +1. The time now is 09:07 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"