Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
D-Logik HD66
Does anyone have any experience with this cheapo budget projector. At switch on, the lamp lights and the fan runs but neither the panel buttons nor the remote control have no effect. There are no graphics displayed, just a bright white raster. The unit will not switch off via the shutdown button. Does anyone know if there's a reset sequence? I stopped doing repairs some time back and I'm only looking at this because it belongs to a friend. I don't intend to spend much time on it. Ron (UK) |
#2
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
Ron wrote in message
... D-Logik HD66 Does anyone have any experience with this cheapo budget projector. At switch on, the lamp lights and the fan runs but neither the panel buttons nor the remote control have no effect. There are no graphics displayed, just a bright white raster. The unit will not switch off via the shutdown button. Does anyone know if there's a reset sequence? I stopped doing repairs some time back and I'm only looking at this because it belongs to a friend. I don't intend to spend much time on it. Ron (UK) Have to hope for a missing "digital" V on the ps and overlay V designations at a header |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Logik IR100 Radios | Electronics Repair | |||
Logik vcr help needed-desperately | Electronics Repair | |||
Logik VCR help n eeded. | Electronics Repair |