Tektronix cross reference pdf for download
 

A nice find for anyone repairing Tektronix equipment
Interesting as it's marked company confidential.

http://www.ko4bb.com/Manuals/Tektron...ix_Xref_sm.pdf

414 pages of data!

Tektronix cross reference pdf for download
 

On 11/9/2011 6:17 AM, JW wrote:
A nice find for anyone repairing Tektronix equipment
Interesting as it's marked company confidential.

http://www.ko4bb.com/Manuals/Tektron...ix_Xref_sm.pdf

414 pages of data!


Thankies for that.

Anyone got the matching HP cross?

Jeff


--
"Everything from Crackers to Coffins"

Tektronix cross reference pdf for download
 

On Wed, 09 Nov 2011 07:19:43 -0600 Jeffrey Angus
wrote in Message id: :

On 11/9/2011 6:17 AM, JW wrote:
A nice find for anyone repairing Tektronix equipment
Interesting as it's marked company confidential.

http://www.ko4bb.com/Manuals/Tektron...ix_Xref_sm.pdf

414 pages of data!


Thankies for that.

Anyone got the matching HP cross?

These have been around for awhile
http://www.sphere.bc.ca/test/hpparts.html#cross

The biggest one is this:
http://www.sphere.bc.ca/download/hp_xref-free.pdf

If anyone else has any others, I'd be interested.

Tektronix cross reference pdf for download
 

On 11/9/2011 8:00 AM, JW wrote:
The biggest one is this:
http://www.sphere.bc.ca/download/hp_xref-free.pdf

Again, thankies

Jeff-1.0



--
"Everything from Crackers to Coffins"

Tektronix cross reference pdf for download
 

On Nov 9, 5:17*am, JW wrote:
A nice find for anyone repairing Tektronix equipment
Interesting as it's marked company confidential.

http://www.ko4bb.com/Manuals/Tektron...s/Tektronix_Xr...

414 pages of data!

Would you send directly to me? The URL does NOT work.

Tektronix cross reference pdf for download
 

On Wed, 9 Nov 2011 06:47:26 -0800 (PST) Robert Macy
wrote in Message id:
:

On Nov 9, 5:17*am, JW wrote:
A nice find for anyone repairing Tektronix equipment
Interesting as it's marked company confidential.

http://www.ko4bb.com/Manuals/Tektron...s/Tektronix_Xr...

414 pages of data!

Would you send directly to me? The URL does NOT work.

Probably because you're using Google Groups [spit], and it looks like it's
trimming the URL. It's 31MB, so it would be best to download yourself.

Go to www.ko4bb.com and navigate your way - Manuals, Tektronix,
Tektronix_-_Miscelaneous. The file is named Tektronix_Xref_sm.

Tektronix cross reference pdf for download
 

On 11/9/2011 9:32 AM, JW wrote:
Probably because you're using Google Groups [spit], and it looks like it's
trimming the URL. It's 31MB, so it would be best to download yourself.

I sent Bob email with the correct links, untrimmed, for both cross
references.

Jeff-1.0



--
"Everything from Crackers to Coffins"

Tektronix cross reference pdf for download
 

On Wed, 09 Nov 2011 09:43:38 -0600 Jeffrey Angus
wrote in Message id: :

On 11/9/2011 9:32 AM, JW wrote:
Probably because you're using Google Groups [spit], and it looks like it's
trimming the URL. It's 31MB, so it would be best to download yourself.

I sent Bob email with the correct links, untrimmed, for both cross
references.

Jeff-1.0

I hadn't thought of that. Duh. Thanks.

Tektronix cross reference pdf for download
 

On Nov 9, 8:43*am, Jeffrey Angus wrote:
On 11/9/2011 9:32 AM, JW wrote:

Probably because you're using Google Groups [spit], and it looks like it's
trimming the URL. It's 31MB, so it would be best to download yourself.

I sent Bob email with the correct links, untrimmed, for both cross
references.

Jeff-1.0

--
"Everything from Crackers to Coffins"

thanks

Tektronix cross reference pdf for download
 

On Nov 9, 9:06*am, JW wrote:
On Wed, 09 Nov 2011 09:43:38 -0600 Jeffrey Angus
wrote in Message id: :

On 11/9/2011 9:32 AM, JW wrote:
Probably because you're using Google Groups [spit], and it looks like it's
trimming the URL. It's 31MB, so it would be best to download yourself.

I sent Bob email with the correct links, untrimmed, for both cross
references.

Jeff-1.0

I hadn't thought of that. Duh. Thanks.

is ok. when the 'redirect to ..." sentence came up, just before it
would disappear, I ctrl-c'd it onto Notepad, corrected it to a
reasonable looking URL, and tried again. That worked! Took from 8:14
to 10:43 to get it downloaded using dial up. But it IS a wealth of
information. Thank you for posting!

TEK 2712 repair info
 

OK, seems like a good place to ask this question...

I have a Tek 2712 spectrum analyzer and one of the Philips PLS157 PLA is
bad. It is in the trace blanking logic. I can buy an unprogrammed PLS157
on E-bay.

Anybody have any ideas where I can get the program info or even better a
pre-programmed part. It is A9U308 PN 160-5005-00 Man code 8009 which is
TEK .

Or failing that, anybody have an idea of what the logic is that is used to
create the blanking signal, there are about 4 or 5 inputs to this chip and
only one output is bad so I might be able to wire up some combinational
logic to re-create the function.

If anybody out there has any info about this, I could use it.

TIA

Mark

TEK 2712 repair info
 

"MarkK" wrote:

OK, seems like a good place to ask this question...

I have a Tek 2712 spectrum analyzer and one of the Philips PLS157 PLA
is bad. It is in the trace blanking logic. I can buy an
unprogrammed PLS157 on E-bay.

Anybody have any ideas where I can get the program info or even better
a pre-programmed part. It is A9U308 PN 160-5005-00 Man code 8009
which is TEK .

Or failing that, anybody have an idea of what the logic is that is
used to create the blanking signal, there are about 4 or 5 inputs to
this chip and only one output is bad so I might be able to wire up
some combinational logic to re-create the function.

If anybody out there has any info about this, I could use it.

TIA

Mark

Mark,

You might try searching the following Yahoo forums:

http://tech.groups.yahoo.com/group/TekScopes/
http://tech.groups.yahoo.com/group/TekScopes2/

The first one gave 59 hits on "2712 spectrum analyzer", and the second
gave 2 that were of no interest.

But you might find someone who has more information on what you are
looking for. I'm sure if the information exists, they can help you find
it.

Mike

TEK 2712 repair info
 

MarkK wrote:
OK, seems like a good place to ask this question...

I have a Tek 2712 spectrum analyzer and one of the Philips PLS157 PLA is
bad. It is in the trace blanking logic. I can buy an unprogrammed PLS157
on E-bay.

Anybody have any ideas where I can get the program info or even better a
pre-programmed part. It is A9U308 PN 160-5005-00 Man code 8009 which is
TEK .

Or failing that, anybody have an idea of what the logic is that is used to
create the blanking signal, there are about 4 or 5 inputs to this chip and
only one output is bad so I might be able to wire up some combinational
logic to re-create the function.

If anybody out there has any info about this, I could use it.

TIA

Mark



Any way you can disconnect the output and look for glitches when
it should switch? work the logic backwards.

Blanking shouldn't be too hard to figure out??

Don't know anything about the chip...assume it'd read locked so you can't
get out the contents???

I've fixed a 308 logic analyzer with a bad prom. Wouldn't run at
speed, but worked well enough to read out the bits.

TEK 2712 repair info
 

"MarkK" wrote:


OK, seems like a good place to ask this question...

I have a Tek 2712 spectrum analyzer and one of the Philips PLS157 PLA is
bad. It is in the trace blanking logic. I can buy an unprogrammed PLS157
on E-bay.

Anybody have any ideas where I can get the program info or even better a
pre-programmed part. It is A9U308 PN 160-5005-00 Man code 8009 which is
TEK .

Or failing that, anybody have an idea of what the logic is that is used to
create the blanking signal, there are about 4 or 5 inputs to this chip and
only one output is bad so I might be able to wire up some combinational
logic to re-create the function.

The logic is quite simple. I have some PDFs with diagrams created by
other people. The PLS157 dies often in these spectrum analyzers.

http://www.edaboard.com/thread17974-2.html

If you register with this site you can download the PDFs (otherwise
they are invisible):


--
Failure does not prove something is impossible, failure simply
indicates you are not using the right tools...
nico@nctdevpuntnl (punt=.)
--------------------------------------------------------------