Suitable Substitute for Freon TF Solvent
 

Hi Folks,

Many years ago, while I was a telephone central office technician, I
used to use a lot of Freon TF solvent. I really loved using it because
it did such a great job.

Fast forward to today. I realize that this solvent has not been
available for quite some time. I would like to "pick the brains" of the
gurus in the group on what solvent is available that is almost as good
as Freon TF. I have some cleaning that needs to be done and most of the
available solvents, from some comments I have checked out, are not up to
the job.

Any assistance would be greatly helpful.

Thanks much.

Rick

Suitable Substitute for Freon TF Solvent
 

On Mon, 26 Sep 2011 19:45:43 -0700, RL Anderson
wrote:

Many years ago, while I was a telephone central office technician, I
used to use a lot of Freon TF solvent. I really loved using it because
it did such a great job.

Fast forward to today. I realize that this solvent has not been
available for quite some time. I would like to "pick the brains" of the
gurus in the group on what solvent is available that is almost as good
as Freon TF. I have some cleaning that needs to be done and most of the
available solvents, from some comments I have checked out, are not up to
the job.

What are you cleaning? Any chlorinated hydrocarbon solvent will work,
but it might also attack the material you're trying to clean.

CaiKleen NF
http://store.caig.com/s.nl/ctype.KB/it.I/id.394/KB.218/.f
http://store.caig.com/s.nl?sc=2&category=&ctype=KB&KB=218&search=CaiKlee n%20NF
I haven't tried the stuff (yet).

--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831-336-2558
# http://802.11junk.com
# http://www.LearnByDestroying.com AE6KS

Suitable Substitute for Freon TF Solvent
 

RL Anderson wrote:
Hi Folks,

Many years ago, while I was a telephone central office technician, I
used to use a lot of Freon TF solvent. I really loved using it because
it did such a great job.

Fast forward to today. I realize that this solvent has not been
available for quite some time. I would like to "pick the brains" of the
gurus in the group on what solvent is available that is almost as good
as Freon TF. I have some cleaning that needs to be done and most of the
available solvents, from some comments I have checked out, are not up to
the job.

Try naphtha. Be very careful because it is flammable
and extremely volatile. Use lots of ventilation.

http://www.sciencelab.com/msds.php?msdsId=9926175

--Winston

Suitable Substitute for Freon TF Solvent
 

On Sep 26, 10:46*pm, Winston wrote:
RL Anderson wrote:
Hi Folks,

Many years ago, while I was a telephone central office technician, I
used to use a lot of Freon TF solvent. *I really loved using it because
it did such a great job.

Fast forward to today. *I realize that this solvent has not been
available for quite some time. *I would like to "pick the brains" of the
gurus in the group on what solvent is available that is almost as good
as Freon TF. *I have some cleaning that needs to be done and most of the
available solvents, from some comments I have checked out, are not up to
the job.

Try naphtha. *Be very careful because it is flammable
and extremely volatile. *Use lots of ventilation.

http://www.sciencelab.com/msds.php?msdsId=9926175

--Winston

I use naptha as a good general purpose solvent, and resort to paint
remover when desperate.

Suitable Substitute for Freon TF Solvent
 

wrote:
On Sep 26, 10:46 pm, wrote:

(...)

Try naphtha. Be very careful because it is flammable
and extremely volatile. Use lots of ventilation.

http://www.sciencelab.com/msds.php?msdsId=9926175

--Winston

I use naptha as a good general purpose solvent, and resort to paint
remover when desperate.

Cheap local sources have dried up for me.
I understand that the stuff is used in
preparing drugs now. I can get it as
Coleman Camping Fuel in gallons but I'm
always asked "where are you camping?"
as if they had the slightest interest.

:)

--Winston

Suitable Substitute for Freon TF Solvent
 

On Tue, 27 Sep 2011 08:39:25 -0700 (PDT), "
wrote:

I use naptha as a good general purpose solvent, and resort to paint
remover when desperate.

Which one?
http://www.cpsc.gov/cpscpub/pubs/423.html
Using paint stripper is probably overkill for contact cleaning. All
those mentioned are hazardous in some manner. All of those mentioned
will eat plastics. However, when desperate, I use automotive brake
cleaner (hexane, xylene, ethyl benzene, toluene, methyl alcohol, etc).
Unfortunately, it's almost as toxic and also eats plastic.



--
Jeff Liebermann
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558

Suitable Substitute for Freon TF Solvent
 

Jeff Liebermann wrote:
On Tue, 27 Sep 2011 08:39:25 -0700 (PDT), "
wrote:

I use naptha as a good general purpose solvent, and resort to paint
remover when desperate.

Which one?
http://www.cpsc.gov/cpscpub/pubs/423.html
Using paint stripper is probably overkill for contact cleaning. All
those mentioned are hazardous in some manner. All of those mentioned
will eat plastics.

I haven't seen any problem with VM&P Naphtha on plastics,
(whatever VM&P *really* is.) :)
It is really gentle and will clean gunk off of plastic
coated flooring (for example) without any damage to
the surface.

However, when desperate, I use automotive brake
cleaner (hexane, xylene, ethyl benzene, toluene, methyl alcohol, etc).
Unfortunately, it's almost as toxic and also eats plastic.

Nasty-in-a-can.

--Winston

Suitable Substitute for Freon TF Solvent
 

In article ,
RL Anderson wrote:

Many years ago, while I was a telephone central office technician, I
used to use a lot of Freon TF solvent. I really loved using it because
it did such a great job.

Fast forward to today. I realize that this solvent has not been
available for quite some time. I would like to "pick the brains" of the
gurus in the group on what solvent is available that is almost as good
as Freon TF. I have some cleaning that needs to be done and most of the
available solvents, from some comments I have checked out, are not up to
the job.

Some of the DuPont "Vertrel" solvent products might suit, perhaps?

--
Dave Platt AE6EO
Friends of Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!

Suitable Substitute for Freon TF Solvent
 

Jeff Liebermann wrote in
:

On Tue, 27 Sep 2011 08:39:25 -0700 (PDT), "
wrote:

I use naptha as a good general purpose solvent, and resort to paint
remover when desperate.

Which one?
http://www.cpsc.gov/cpscpub/pubs/423.html
Using paint stripper is probably overkill for contact cleaning. All
those mentioned are hazardous in some manner. All of those mentioned
will eat plastics. However, when desperate, I use automotive brake
cleaner (hexane, xylene, ethyl benzene, toluene, methyl alcohol, etc).
Unfortunately, it's almost as toxic and also eats plastic.




perhaps automotive Mass Air Flow Sensor cleaner would work?
my can of CRC cleaner says it's plastic safe and leaves no residue,and you
can find it at most auto parts stores and even Wal-Mart.
it's around $3 per 11 oz can.

--
Jim Yanik
jyanik
at
localnet
dot com

Suitable Substitute for Freon TF Solvent
 

Jim Yanik wrote:

(...)

perhaps automotive Mass Air Flow Sensor cleaner would work?
my can of CRC cleaner says it's plastic safe and leaves no residue,and you
can find it at most auto parts stores and even Wal-Mart.
it's around $3 per 11 oz can.

So that's pressurized naphtha and mineral spirits
for 34.91 a gallon, yes?
http://www.crcindustries.com/faxdocs/msds/5025.pdf
Coleman Camp Fuel is still around $11.00 a gallon.

For The Moment. :)

--Winston

Suitable Substitute for Freon TF Solvent
 

On Sep 26, 10:45*pm, RL Anderson wrote:
Hi Folks,

One word WD40.

I got turned onto WD40 at first I said no freaking way, but seen
results of other techs using it so I said wtf. Been using WD40 for
almost everything since the 1990's

Suitable Substitute for Freon TF Solvent
 

raypsi wrote:

On Sep 26, 10:45 pm, RL Anderson wrote:
Hi Folks,

One word WD40.

I got turned onto WD40 at first I said no freaking way, but seen
results of other techs using it so I said wtf. Been using WD40 for
almost everything since the 1990's


Thanks for the warning that you're absolutely clueless and potentially
dangerous. Freon was used to clean video tape heads and remove any
trace of petroleum products. Freon was also used to remove flux from
circuit boards in a closed system that recovered & reused the freon.


--
You can't have a sense of humor, if you have no sense.