DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Microwave waveguide (https://www.diybanter.com/electronics-repair/327681-microwave-waveguide.html)

Trail Rider August 25th 11 05:21 PM

Microwave waveguide
 
Microwave oven was arcing, so after reading the repair faq I learned
that the wave guide cover was a possible source. Sure enough the cover
had food material on it that had carbonized. I tried soap and water
but that wasn't removing it. I was able to scrape some of it off using
my finger nail but there was still material that didn't want to come
off the cover. So then I tried a scotch brite scrubbing sponge and
gave it a good scrub. That did the trick and the microwave now works.
However, during the cleaning I noticed that a shiny material was being
removed from the guide in addition to the carbonized food particles.
I'm guessing this was the material the waveguide is made from which
appears to be mica. Are these small flakes toxic or otherwise
dangerous to health?

micky August 25th 11 07:24 PM

Microwave waveguide
 
On Thu, 25 Aug 2011 09:21:05 -0700 (PDT), Trail Rider
wrote:

Microwave oven was arcing, so after reading the repair faq I learned
that the wave guide cover was a possible source. Sure enough the cover
had food material on it that had carbonized. I tried soap and water
but that wasn't removing it. I was able to scrape some of it off using
my finger nail but there was still material that didn't want to come
off the cover. So then I tried a scotch brite scrubbing sponge and
gave it a good scrub. That did the trick and the microwave now works.
However, during the cleaning I noticed that a shiny material was being
removed from the guide in addition to the carbonized food particles.
I'm guessing this was the material the waveguide is made from which
appears to be mica. Are these small flakes toxic or otherwise
dangerous to health?


I'm not an electronics, geology, or medical guru, but I'd guess yes.
Still, most of the people who get hurt by all these toxic things are
people who work with it for a living, who mine it or grind it and
inhale a tiny bit day after day, year after year. LIke professional
waveguide scurbbers.

This assumes it's mica. I haven't seen it but I'm not convinced.

When I inhaled, I think, a piece of vinyl insulation from a piece of
wire, my brother, an MD, said don't worry about it. Unnless you're a
star athlete or spend time being chsed by lions, you have a lot more
lung than you really need.

Ian Field August 25th 11 09:20 PM

Microwave waveguide
 

"Trail Rider" wrote in message
...
Microwave oven was arcing, so after reading the repair faq I learned
that the wave guide cover was a possible source. Sure enough the cover
had food material on it that had carbonized. I tried soap and water
but that wasn't removing it. I was able to scrape some of it off using
my finger nail but there was still material that didn't want to come
off the cover. So then I tried a scotch brite scrubbing sponge and
gave it a good scrub. That did the trick and the microwave now works.
However, during the cleaning I noticed that a shiny material was being
removed from the guide in addition to the carbonized food particles.
I'm guessing this was the material the waveguide is made from which
appears to be mica. Are these small flakes toxic or otherwise
dangerous to health?


Particles of mica dispersed by arcing could possibly be hazardous -
especially showered onto your dinner.

I certainly wouldn't risk it.

Whether you chose to follow suit is up to you, but in this situation I would
remove the mica 'window' and throw it in the bin. The risk you would be
taking is that certain foods pop or spit and particles could end up in the
waveguide, usually this isn't a big problem unless you explode an egg in the
microwave. When I did that a large chunk of egg white blocked the waveguide
and overloaded the transformer.

Its also possible you might be able to locate a component supplier for
consumer goods and order a new mica - but I'm guessing its pretty old as
most use dielectric plastic these days.



Cydrome Leader August 25th 11 09:35 PM

Microwave waveguide
 
Ian Field wrote:

"Trail Rider" wrote in message
...
Microwave oven was arcing, so after reading the repair faq I learned
that the wave guide cover was a possible source. Sure enough the cover
had food material on it that had carbonized. I tried soap and water
but that wasn't removing it. I was able to scrape some of it off using
my finger nail but there was still material that didn't want to come
off the cover. So then I tried a scotch brite scrubbing sponge and
gave it a good scrub. That did the trick and the microwave now works.
However, during the cleaning I noticed that a shiny material was being
removed from the guide in addition to the carbonized food particles.
I'm guessing this was the material the waveguide is made from which
appears to be mica. Are these small flakes toxic or otherwise
dangerous to health?


Particles of mica dispersed by arcing could possibly be hazardous -
especially showered onto your dinner.

I certainly wouldn't risk it.


The sparkle-looking stuff in toothpast is mica, and harmless.

Just don't snort mica dust like a line of coke or anything like that.






All times are GMT +1. The time now is 07:16 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter