Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 35
Default OT... cleaning wood stove glass

Hi, All.
Somewhat OT... not real science (but related), not electronics and
it's maintenance rather than repair...
You can clean the inside of the glass of a wood stove very effectively
by using automotive "Bug and Tar Remover". It works at least as well
as specialized wood stove products, costs less and is easily found in
automotive supply stores like Canadian Tire in Canada.
Now back to my radio restoration hobby - I have a 1948 Viking 5-tube
AM-only superhet on the bench... chassis recapped, re-aligned and
working, now to face the cabinet...
Cheers,
Roger
  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 4,045
Default OT... cleaning wood stove glass

On Mon, 1 Aug 2011 08:58:30 -0700 (PDT), Engineer
wrote:

Somewhat OT... not real science (but related), not electronics and
it's maintenance rather than repair...
You can clean the inside of the glass of a wood stove very effectively
by using automotive "Bug and Tar Remover". It works at least as well
as specialized wood stove products, costs less and is easily found in
automotive supply stores like Canadian Tire in Canada.


Just what are you burning that requires such extreme cleaning?
Creosote saturated telephone poles or railroad ties? Bug and tar
remover is some heavy duty petrolium solvent, which might be useful
for removing such muck, but you shouldn't be burning it in the first
place. The recommended cleaner is water, ammonia, and elbow grease.
http://www.thecloroxcompany.com/testfiles/armorallstp/tuffstuffbugandtarremover.pdf
If the fire is hot enough, it will not fog the glass. If you find
that you're condensing tree sap (creosote) on the glass, then you're
not getting complete combustion and are probably also consensing the
creosote in your flue pipe. You might check for an accumulation
before you have a chimney fire. A handfull of salt on a hot fire will
help.

Now back to my radio restoration hobby - I have a 1948 Viking 5-tube
AM-only superhet on the bench... chassis recapped, re-aligned and
working, now to face the cabinet...


Sounds like a nice project. When you get it working, let me know if
you hear anything that was broadcast in 1948.


--
Jeff Liebermann
150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Russo Glass-View wood Stove Lil Lil Shemp Home Repair 33 September 3rd 17 08:43 PM
Wood Burning Stove - Glass doors always smoked up! Richard UK diy 10 November 20th 15 07:07 PM
Pitted wood stove glass - how to prevent Zootal Home Repair 9 October 28th 06 05:20 AM
Scratched black glass hob (glass stove). [email protected] Home Repair 0 October 9th 05 12:39 PM
Installing pellet stove into existing prefab wood stove chimney northcountry Home Repair 2 May 16th 05 03:53 PM


All times are GMT +1. The time now is 02:11 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"