DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Rewrite bios through port serial (https://www.diybanter.com/electronics-repair/324201-rewrite-bios-through-port-serial.html)

pahm June 5th 11 10:31 AM

Rewrite bios through port serial
 

Hi all


It is possible to rewrite the chip bios , with Win XP, with Electronic
card, attacched to serial port, or parallel or Usb port?

Thanks

Regards



[email protected] June 5th 11 08:07 PM

Rewrite bios through port serial
 
On Sun, 5 Jun 2011 11:31:18 +0200, "pahm" wrote:


Hi all


It is possible to rewrite the chip bios , with Win XP, with Electronic
card, attacched to serial port, or parallel or Usb port?

Thanks

Regards


You might have better luck with the Bus Pirate device (about $30US).
It can talk to the newer BIOS chips that use I2C or SPI. More info
he http://dangerousprototypes.com/bus-pirate-manual/

John

pahm June 6th 11 10:07 AM

Rewrite bios through port serial
 

Hi all


It is possible to rewrite the chip bios , with Win XP, with Electronic
card, attacched to serial port, or parallel or Usb port?

Thanks

Regards


You might have better luck with the Bus Pirate device (about $30US).
It can talk to the newer BIOS chips that use I2C or SPI. More info
he http://dangerousprototypes.com/bus-pirate-manual/

John


the buspirate works with plcc bios chip?

Regards





mike June 6th 11 12:25 PM

Rewrite bios through port serial
 
pahm wrote:
Hi all


It is possible to rewrite the chip bios , with Win XP, with Electronic
card, attacched to serial port, or parallel or Usb port?

Thanks

Regards

You might have better luck with the Bus Pirate device (about $30US).
It can talk to the newer BIOS chips that use I2C or SPI. More info
he http://dangerousprototypes.com/bus-pirate-manual/

John


the buspirate works with plcc bios chip?

Regards




might be helpful if you'd disclose what you're trying to accomplish.
is this a computer? processor? OS? model? motherboard? age? something!!!
Does it run and you want to update?
fixing a failed bios update?
Trying to clear a bios lock password?
other?
Are those your only options? no cdrom, floppy, bootable usb, network boot?
Some older systems had means to recover flash with a parallelport dongle,
I think?
Without ANY clues, it's hard to help.

pahm June 6th 11 04:34 PM

Rewrite bios through port serial
 


might be helpful if you'd disclose what you're trying to accomplish.
is this a computer? processor? OS? model? motherboard? age? something!!!
Does it run and you want to update?
fixing a failed bios update?
Trying to clear a bios lock password?
other?
Are those your only options? no cdrom, floppy, bootable usb, network boot?
Some older systems had means to recover flash with a parallelport dongle,
I think?
Without ANY clues, it's hard to help.



the mobo is PcChips 810ML socket 462, bios Ami 1999.

know which version of AMI BIOS or what kind of motherboard does
restore the bios with the procedure AMI :

Quick Flash Instructions For AMI Motherboards:
(FLASH UTILITY NOT REQUIRED)
- Unzip file, copy the "ROM" file to a diskette in "A" drive.
(Diskette does not have to be bootable).
- Make sure you are using the on board floppy controller.
- With system powered off and diskette with "ROM" file in "A" drive.
- Hold down on the "CTRL & HOME" keys and then power on system.
- There will be no video and notice floppy drive being accessed.
- You should hear 1 beep let go of keys.
- Then you will hear 2 beeps and then 3 beeps.
- System should reset and notice new BIOS release date at top of screen.
- Enter BIOS SETUP run the OPTIMAL SETINGS OPTION.
- Change BIOS SETTINGS for your configuration.

Regards





William Sommerwerck June 6th 11 05:36 PM

Rewrite bios through port serial
 
For what it's worth...

The documentation for my ASUS board specifically says "Do not update the
BIOS unless you are absolutely certain the problem is BIOS-related, and the
newer BIOS will fix it." This is probably CYA on ASUS's part, but it makes
sense.



Adrian C June 6th 11 06:10 PM

Rewrite bios through port serial
 
On 06/06/2011 16:34, pahm wrote:

the mobo is PcChips 810ML socket 462, bios Ami 1999.


Identify the board properly (including version number), download the
bios and flash using the recommended method. Being a PC CHIPS board, be
sure that you really want to use it. Their boards are generally crap and
I wouldn't really be suprised to see bad capacitors failing on it, never
mind the bios update process actually suceeding.

Looking at bios flashing instructions for other motherboards will
confuse you.

--
Adrian C

Baron[_4_] June 6th 11 09:14 PM

Rewrite bios through port serial
 
pahm Inscribed thus:



might be helpful if you'd disclose what you're trying to accomplish.
is this a computer? processor? OS? model? motherboard? age?
something!!! Does it run and you want to update?
fixing a failed bios update?
Trying to clear a bios lock password?
other?
Are those your only options? no cdrom, floppy, bootable usb, network
boot? Some older systems had means to recover flash with a
parallelport dongle, I think?
Without ANY clues, it's hard to help.



the mobo is PcChips 810ML socket 462, bios Ami 1999.

know which version of AMI BIOS or what kind of motherboard does
restore the bios with the procedure AMI :

Quick Flash Instructions For AMI Motherboards:
(FLASH UTILITY NOT REQUIRED)
- Unzip file, copy the "ROM" file to a diskette in "A" drive.
(Diskette does not have to be bootable).
- Make sure you are using the on board floppy controller.
- With system powered off and diskette with "ROM" file in "A" drive.
- Hold down on the "CTRL & HOME" keys and then power on system.
- There will be no video and notice floppy drive being accessed.
- You should hear 1 beep let go of keys.
- Then you will hear 2 beeps and then 3 beeps.
- System should reset and notice new BIOS release date at top of
screen. - Enter BIOS SETUP run the OPTIMAL SETINGS OPTION.
- Change BIOS SETTINGS for your configuration.

Regards


One of my clients had a machine with that M/B. Bad caps ! The power
devices in the CPU PSU got so hot the solder melted and the devices
slid off their pads destroying the board. If I remember correctly the
CPU is soldered directly to the board.

--
Best Regards:
Baron.


All times are GMT +1. The time now is 09:21 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter