Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Crate BV150H
What sort of quiescent mains draw current (240V land) for 6x good 6L6 and
remainder of the amp , if the bias has not been messed around with ? |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Crate BV150H
On Tue, 15 Mar 2011 14:56:45 +0000, N_Cook wrote:
What sort of quiescent mains draw current (240V land) for 6x good 6L6 and remainder of the amp , if the bias has not been messed around with ? Fuse is 3A SB for 230V. I'd expect less than 1 amp idle. Didn't you ask about this amp back in 2009? -- Live Fast Die Young, Leave A Pretty Corpse |
#3
Posted to sci.electronics.repair
|
|||
|
|||
Crate BV150H
Meat Plow wrote in message
news On Tue, 15 Mar 2011 14:56:45 +0000, N_Cook wrote: What sort of quiescent mains draw current (240V land) for 6x good 6L6 and remainder of the amp , if the bias has not been messed around with ? Fuse is 3A SB for 230V. I'd expect less than 1 amp idle. Didn't you ask about this amp back in 2009? -- Live Fast Die Young, Leave A Pretty Corpse That was "lighthouse" neon 47K dropper for 110V used in uk on 240V. Same with this one needing the mains switch changing , charred and part melted sw cover this one but holding up at 47K. This one been run too long with insufficient bias and run away red valves. |
#4
Posted to sci.electronics.repair
|
|||
|
|||
Crate BV150H
On Mar 15, 10:56*am, "N_Cook" wrote:
What sort of quiescent mains draw current (240V land) for 6x good 6L6 and remainder of the amp , if the bias has not been messed around with ? Check plate current directly. Its not a great idea to ballpark bias by mains current... |
#5
Posted to sci.electronics.repair
|
|||
|
|||
Crate BV150H
"bored junkie" Check plate current directly. Its not a great idea to ballpark bias by mains current... ** Wrong - as always. ..... Phil |
#6
Posted to sci.electronics.repair
|
|||
|
|||
Crate BV150H
On Mar 15, 11:31*pm, "Phil Allison" wrote:
"bored junkie" Check plate current directly. Its not a great idea to ballpark bias by mains current... ** Wrong *- *as always. .... *Phil Horse****. You lose....again..... |
#7
Posted to sci.electronics.repair
|
|||
|
|||
Crate BV150H
"bored junkies are all losers " Check plate current directly. Its not a great idea to ballpark bias by mains current... ** Wrong - as always. ..... Phil |
#8
Posted to sci.electronics.repair
|
|||
|
|||
Crate BV150H
On Mar 16, 12:17*am, "Phil Allison" wrote:
"bored junkies are all losers " Check plate current directly. Its not a great idea to ballpark bias by mains current... ** Wrong *- *as always. .... *Phil Waaaaaaaa! Boo hoo...... Here's Phallison going for the record of biggest douche on Usenet and he can't even get that right..... |
#9
Posted to sci.electronics.repair
|
|||
|
|||
Bored Junkies are all losers
"bored junkies are all losers " Check plate current directly. Its not a great idea to ballpark bias by mains current... ** Wrong advice - as always. ..... Phil |
#10
Posted to sci.electronics.repair
|
|||
|
|||
"waaah boo hoo" - Phallison
On Mar 16, 9:09*pm, "Phil Allison" wrote:
"bored junkies are all losers " Check plate current directly. Its not a great idea to ballpark bias by mains current... ** Wrong *advice *- *as always. .... *Phil Still not there yet......keep trying.... |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Crate BV150H amp , safety issue | Electronics Repair | |||
Crate BV150H valve amps | Electronics Repair | |||
Crate BV150H tube/valve amp | Electronics Repair | |||
Crate by name ... | Electronics Repair | |||
Crate BX-100 amp | Electronics Repair |