DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Brittle plastic? (https://www.diybanter.com/electronics-repair/317473-brittle-plastic.html)

larry moe 'n curly January 20th 11 07:15 AM

Brittle plastic?
 
I got rid of my vintage 1995 Sanyo TV because the plastic case was so
brittle it didn't seem capable of safely supporting the weight of the
CRT, but the plastic of my 1976 TV seems fine. Both cases were made
of fire retardant ABS, but why was it so much more brittle in the
newer TV?


Stroonz January 20th 11 01:13 PM

Brittle plastic?
 
On Jan 20, 2:15*am, "larry moe 'n curly"
wrote:
I got rid of my vintage 1995 Sanyo TV because the plastic case was so
brittle it didn't seem capable of safely supporting the weight of the
CRT, but the plastic of my 1976 TV *seems fine. *Both cases were made
of fire retardant ABS, but why was it so much more brittle in the
newer TV?


There was a large batch of TVs from that era with plastic that
deteriorates with age. Most common were Sony, Toshiba, and Hitachi.
I recall a few Panasonics doing the same thing. Years ago, I remember
two guys hauling in a 36 inch Sony into the shop with the TV literally
coming apart in their hands. By the time they put it on the floor, it
looked like a dropped egg.

[email protected] January 20th 11 06:25 PM

Brittle plastic?
 
On Wed, 19 Jan 2011 23:15:41 -0800 (PST), "larry moe 'n curly"
wrote:

I got rid of my vintage 1995 Sanyo TV because the plastic case was so
brittle it didn't seem capable of safely supporting the weight of the
CRT, but the plastic of my 1976 TV seems fine. Both cases were made
of fire retardant ABS, but why was it so much more brittle in the
newer TV?

Any plastic is a combination of materials. One of the materials is a
plasticizer, which provides flexibility in the finished product.
Plasticizers tend to be somewhat volatile, evaporating slowly with
time. Depending on the exact compound, it may take months, years, or
decades before the loss of flexibility becomes a problem. Of course,
there are ongoing efforts to find plasticizers which are cheaer to
make and last longer.

Most manufacturers run artificial aging tests to prevent problems like
this, but even those rarely can do better than 10 to 1 (one years test
= ten years of normal use). Few manufacturers are willing to hold a
new product off the market for more than a year of testing.

PlainBill

Klaatu January 22nd 11 07:56 PM

Brittle plastic?
 
"larry moe 'n curly" wrote in message
...
I got rid of my vintage 1995 Sanyo TV because the plastic case was so
brittle it didn't seem capable of safely supporting the weight of the
CRT, but the plastic of my 1976 TV seems fine. Both cases were made
of fire retardant ABS, but why was it so much more brittle in the
newer TV?



I had a 27" Hitachi in an entertainment center in the bedroom until last
month. It still works great, just one repair since I got it in 1995.
Wanted to replace it w/hdtv 26" LCD, so scooted it around 90 degrees,
unhooked all the cables, turned it back around, wrapped my arms around it,
picked it up, and the back shattered into pieces! I wasn't hurt, but the TV
was turned into junk.
BEWARE!



All times are GMT +1. The time now is 01:50 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter