DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Polaroid TLX-04011C vertical stripe (https://www.diybanter.com/electronics-repair/306022-polaroid-tlx-04011c-vertical-stripe.html)

klem kedidelhopper July 6th 10 03:12 PM

Polaroid TLX-04011C vertical stripe
 
This set has a dim vertical bar about 4 inches wide just to the right
of center screen. There is a normal full color picture otherwise but
this "bar" is a bit dimmer than the rest of the screen, and so its
noticible. The strange thing is though depending upon the scene
sometimes you don't notice it at all and at other times it seems quite
prominent. At times you can notice smears of red going through this
area as well. The customer says he did a search on this thing and
seems to think it needs a "capacitor". But then sometimes they tell me
its the switch when it won't turn on too. I looked but found nothing
that really seems to pertain to this problem exectly.
Does anyone have any experience with this problem on this set? Thanks,
Lenny

[email protected] July 6th 10 07:28 PM

Polaroid TLX-04011C vertical stripe
 
On Tue, 6 Jul 2010 07:12:43 -0700 (PDT), klem kedidelhopper
wrote:

This set has a dim vertical bar about 4 inches wide just to the right
of center screen. There is a normal full color picture otherwise but
this "bar" is a bit dimmer than the rest of the screen, and so its
noticible. The strange thing is though depending upon the scene
sometimes you don't notice it at all and at other times it seems quite
prominent. At times you can notice smears of red going through this
area as well. The customer says he did a search on this thing and
seems to think it needs a "capacitor". But then sometimes they tell me
its the switch when it won't turn on too. I looked but found nothing
that really seems to pertain to this problem exectly.
Does anyone have any experience with this problem on this set? Thanks,
Lenny

Is this a sharply deliniated bar, indicating a problem with columns of
pixels, or do the edges gradually merge into the 'good' area.
A sharp edged column would indicate a problem either with a column
driver in the LCD panel itself (not repairable), or the t-con board
(usually replaceable).

A dimmer column with no sharp edges could indicate a backlight
problem.

As far as the customer's suggestion, while it is unlikely, this
wouldn't be the first time some very strange symptoms resulted from a
marginal capacitor.

PlainBill

klem kedidelhopper July 7th 10 01:38 PM

Polaroid TLX-04011C vertical stripe
 
On Jul 6, 2:28*pm, wrote:
On Tue, 6 Jul 2010 07:12:43 -0700 (PDT), klem kedidelhopper

wrote:
This set has a dim vertical bar about 4 inches wide just to the right
of center screen. There is a normal full color picture otherwise but
this "bar" is a bit dimmer than the rest of the screen, and so its
noticible. The strange thing is though depending upon the scene
sometimes you don't notice it at all and at other times it seems quite
prominent. At times you can notice smears of red going through this
area as well. The customer says he did a search on this thing and
seems to think it needs a "capacitor". But then sometimes they tell me
its the switch when it won't turn on too. I looked but found nothing
that really seems to pertain to this problem exectly.
Does anyone have any experience with this problem on this set? Thanks,
Lenny


Is this a sharply deliniated bar, indicating a problem with columns of
pixels, or do the edges gradually merge into the 'good' area.
A sharp edged column would indicate a problem either with a column
driver in the LCD panel itself (not repairable), or the t-con board
(usually replaceable).

A dimmer column with no sharp edges could indicate a backlight
problem.

As far as the customer's suggestion, while it is unlikely, this
wouldn't be the first time some very strange symptoms resulted from a
marginal capacitor.

PlainBill


The edges are sharply defined however the "column" is slightly
somewhat dimmer than the rest of the picture. That's what makes it
noticeable I guess. How do you rule out /in a t con board? I did try
cleaning the cable but it made no difference.Thanks, Lenny

[email protected] July 9th 10 07:47 PM

Polaroid TLX-04011C vertical stripe
 
On Wed, 7 Jul 2010 05:38:55 -0700 (PDT), klem kedidelhopper
wrote:

On Jul 6, 2:28*pm, wrote:
On Tue, 6 Jul 2010 07:12:43 -0700 (PDT), klem kedidelhopper

wrote:
This set has a dim vertical bar about 4 inches wide just to the right
of center screen. There is a normal full color picture otherwise but
this "bar" is a bit dimmer than the rest of the screen, and so its
noticible. The strange thing is though depending upon the scene
sometimes you don't notice it at all and at other times it seems quite
prominent. At times you can notice smears of red going through this
area as well. The customer says he did a search on this thing and
seems to think it needs a "capacitor". But then sometimes they tell me
its the switch when it won't turn on too. I looked but found nothing
that really seems to pertain to this problem exectly.
Does anyone have any experience with this problem on this set? Thanks,
Lenny


Is this a sharply deliniated bar, indicating a problem with columns of
pixels, or do the edges gradually merge into the 'good' area.
A sharp edged column would indicate a problem either with a column
driver in the LCD panel itself (not repairable), or the t-con board
(usually replaceable).

A dimmer column with no sharp edges could indicate a backlight
problem.

As far as the customer's suggestion, while it is unlikely, this
wouldn't be the first time some very strange symptoms resulted from a
marginal capacitor.

PlainBill


The edges are sharply defined however the "column" is slightly
somewhat dimmer than the rest of the picture. That's what makes it
noticeable I guess. How do you rule out /in a t con board? I did try
cleaning the cable but it made no difference.Thanks, Lenny

The only way to evaluate the t-con board is by replacement with a
known good one. Because of the way the drivers are arranged, this is
most likely due to a bad driver IC.

PlainBill

Franc Zabkar July 10th 10 01:24 AM

Polaroid TLX-04011C vertical stripe
 
On Wed, 7 Jul 2010 05:38:55 -0700 (PDT), klem kedidelhopper
put finger to keyboard and composed:

The edges are sharply defined however the "column" is slightly
somewhat dimmer than the rest of the picture. That's what makes it
noticeable I guess. How do you rule out /in a t con board? I did try
cleaning the cable but it made no difference.Thanks, Lenny


Scope the driver outputs?

Interchange the suspect driver with an another on the same card?

What are the part numbers of the driver ICs? Some ICs can be purchased
separately.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.


All times are GMT +1. The time now is 11:56 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter