DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Marshall Master Lead combo, 1978 (https://www.diybanter.com/electronics-repair/305215-marshall-master-lead-combo-1978-a.html)

N_Cook June 21st 10 02:57 PM

Marshall Master Lead combo, 1978
 
In for more basic problem but query here , should anyone know, as only a
Polish reference out there.
All seems original in there and o/p devices TO3 Motorola, badged SCSP1 and
SCSN1.
Presumably , as only +/-24V rails 3055/2955 would be adequate , if required,
but if anyone knows for sure, for future reference.



Adam Sampson June 21st 10 04:48 PM

Marshall Master Lead combo, 1978
 
"N_Cook" writes:

All seems original in there and o/p devices TO3 Motorola, badged SCSP1
and SCSN1. Presumably , as only +/-24V rails 3055/2955 would be
adequate


This schematic shows MJ3001 and MJ2501 as equivalents for SCSN1 and SCSP1:
http://www.drtube.com/schematics/marshall/2099u.gif

These are Darlington pairs, so they have much greater hFE than the
2N3055/MJ2955. They're only about a fiver a pair from Farnell.

--
Adam Sampson http://offog.org/

Phil Allison[_2_] June 21st 10 04:59 PM

Marshall Master Lead combo, 1978
 

"Nutcase_Kook"

In for more basic problem but query here , should anyone know, as only a
Polish reference out there.
All seems original in there and o/p devices TO3 Motorola, badged SCSP1 and
SCSN1.
Presumably , as only +/-24V rails 3055/2955 would be adequate , if
required,
but if anyone knows for sure, for future reference.



** The devices are DARLINGTONS - dickhead.

Did you not notice the total absence of DRIVER transistors - eh ???

The pair are MJ2501 and MJ3001.




..... Phil




N_Cook June 21st 10 05:10 PM

Marshall Master Lead combo, 1978
 
Adam Sampson wrote in message
...
"N_Cook" writes:

All seems original in there and o/p devices TO3 Motorola, badged SCSP1
and SCSN1. Presumably , as only +/-24V rails 3055/2955 would be
adequate


This schematic shows MJ3001 and MJ2501 as equivalents for SCSN1 and SCSP1:
http://www.drtube.com/schematics/marshall/2099u.gif

These are Darlington pairs, so they have much greater hFE than the
2N3055/MJ2955. They're only about a fiver a pair from Farnell.

--
Adam Sampson http://offog.org/



The info is out there, for all, in ASCII format now



Phil Allison[_2_] June 22nd 10 02:27 AM

Marshall Master Lead combo, 1978
 

"Adam Sampson"

This schematic shows MJ3001 and MJ2501 as equivalents for SCSN1 and SCSP1:
http://www.drtube.com/schematics/marshall/2099u.gif

These are Darlington pairs, so they have much greater hFE than the
2N3055/MJ2955. They're only about a fiver a pair from Farnell.



** If someone fits 2N3055s and MJ2955s instead of the correct types, the
transistors will run hot but deliver low power.

Seen done it a few times and the repair tech could not figure it out.


..... Phil




All times are GMT +1. The time now is 05:08 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter