Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Repairing LCD display on Keithley 580
Working on a Keithley 580 micro ohm meter that has a display problem. The
first row which controls the bottom segments is very faded - the more segments that are lit, the more faded they are. I've already used alcohol to clean the two zebra strips, PCB and LCD itself. I've tried re-orienting the zebra strips to see if the problem moves; it does not. Checked the UPD7225 driver chip - pin 17 (COM2) drives this row, it is working fine. I believe that either the LCD itself is defective, or perhaps the conductor on the glass is partially open/high resistance. If the latter (and I'm hoping this is the case) has anyone ever had this sort of problem, and perhaps tried one of those conductive pens to repair the fault? Thanks. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Don't buy Keithley (from seb) - Keithley 191.jpg | Electronic Schematics | |||
Dual N-channel JFET substitute for Keithley 617? | Electronics Repair | |||
Keithley 616 component ID | Electronics Repair | |||
Keithley 197 help | Electronics Repair | |||
keithley 485 the schematics | Electronics Repair |