Marantz DV6200 No-Disk
This Marantz DV6200 fails to play the DVD. It does plays CD's
perfectly, but using a DVD you can see the Laser head is trying to focus, the tracking sled is moving towards the center of the DVD, the disk spins up and this proces repeats itself 3 times and after that NO DISK is displayed. The DVD cannot be removed using STOP/OPEN, I have to reintialize main power. Any suggestions what to troubleshoot and/or replace? TIA Brasto |
Marantz DV6200 No-Disk
Brasto wrote:
This Marantz DV6200 fails to play the DVD. It does plays CD's perfectly, but using a DVD you can see the Laser head is trying to focus, the tracking sled is moving towards the center of the DVD, the disk spins up and this proces repeats itself 3 times and after that NO DISK is displayed. The DVD cannot be removed using STOP/OPEN, I have to reintialize main power. Any suggestions what to troubleshoot and/or replace? TIA Brasto You could try replacing the spindle motor. They usually sputter out quickly on these machines. I think it's a Pioneer brand. Check for the Pioneer part number stamped on the motor. Take note of the height of the spindle table because you'll need to reinstall it closely to the original height on the new motor. Good luck. -- David Farber David Farber's Service Center L.A., CA |
Marantz DV6200 No-Disk
"Brasto" This Marantz DV6200 fails to play the DVD. ** It's over 8 years old - right ? It does plays CD's perfectly, but using a DVD you can see the Laser head is trying to focus, the tracking sled is moving towards the center of the DVD, the disk spins up and this proces repeats itself 3 times and after that NO DISK is displayed. The DVD cannot be removed using STOP/OPEN, I have to reintialize main power. Any suggestions what to troubleshoot and/or replace? ** Good chance the red laser has failed - the one that reads DVDs ..... Phil |
Marantz DV6200 No-Disk
"David Farber" wrote in message
. .. Brasto wrote: This Marantz DV6200 fails to play the DVD. It does plays CD's perfectly, but using a DVD you can see the Laser head is trying to focus, the tracking sled is moving towards the center of the DVD, the disk spins up and this proces repeats itself 3 times and after that NO DISK is displayed. The DVD cannot be removed using STOP/OPEN, I have to reintialize main power. Any suggestions what to troubleshoot and/or replace? TIA Brasto You could try replacing the spindle motor. They usually sputter out quickly on these machines. I think it's a Pioneer brand. Check for the Pioneer part number stamped on the motor. Take note of the height of the spindle table because you'll need to reinstall it closely to the original height on the new motor. Good luck. -- David Farber David Farber's Service Center L.A., CA "Base assy" part number 9965 000 11758. It does not appear to be a Pioneer part (if it were, it would probably still be working :-) Mark Z. |
Marantz DV6200 No-Disk
On 13 apr, 05:20, "Phil Allison" wrote:
"Brasto" This Marantz DV6200 fails to play the DVD. ** *It's over 8 years old *- * right ? It does plays CD's perfectly, but using a DVD you can see the Laser head is trying to focus, the tracking sled is moving towards the center of the DVD, the disk spins up and this proces repeats itself 3 times and after that NO DISK is displayed. The DVD cannot be removed using STOP/OPEN, I have to reintialize main power. Any suggestions what to troubleshoot and/or replace? ** Good chance the red laser has failed - *the one that reads DVDs .... *Phil Hi Phil, you are close to the year of manufacture, it was actually 2003... If the red laser is the cause of failure, it will be the end of my repair attempt as replacement of the component may cost EUR 150, correct? As I explained to David before, I donot think it is the spindle motor, this spindlemotor is a multi phase AC driven device and not the lowcost DC garbage which one could find in lowcost CD-players.... |
All times are GMT +1. The time now is 08:24 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter